Solid State Batteries | Start Ups | Scale Up | R2R | Novel Cathode Composites | Emerging Electrolyte Material Families | AI in Material Discovery and Optimization | LiS | Graphene | Reactive Metals | Al | Sodium | Zn | VACNT | Green Solvents | Si Anode | Fluoride Cathodes | Solvent Free | Ni-Rich NMCs | 3D Architectures | Additively Manufactured | Novel Cermaics
Director of Marketing
Using Advanced Battery Design to Truly Electrify Transportation"
As climate change concerns continue to drive interest in clean energy and our daily lives become increasingly digitized and dependent on electronics, electrification has become a widespread trend across almost every industry. The problem is that battery innovation hasn’t kept pace with the electric revolution. Charging time, available capacity, lifetime degradation, and costs are key performance areas that are lacking in batteries today.
While most efforts to enhance battery performance to date have been focused on battery chemistry, this has only led to incremental changes over the past 30 years. The key to the next step-change in battery performances lies within its structure.
This is what Addionics is doing - changing battery architecture to allow the next step-change in battery performance, to any battery chemistry, existing or emerging.
Tailor-made REALSi for high-performance Li-ion batteries
Today, battery performance is limited by active materials. Graphite storage ability is one of the bottlenecks we can solve using Silicon (Si). Our nanoSi and microSi are based on elemental Si; we call our materials REALSiTM, which is not an oxide, nor produced by Silane gas. Advano converts metallurgical Si, including scrap, into battery-grade REALSiTM using proprietary material science technology. REALSiTM offers tailor-made solutions to both solid-state and liquid-electrolyte batteries. We are open to partnerships to accelerate the commercialization of real Si. The next major evolution in batteries is real Si; our team envisions having REALSiTM in every battery.
Full silicon nanowire anodes: towards highest energy density Lithium-ion batteries
The silicon nanowire anode technology addresses silicon swelling by enabling silicon to expand and contract internally, in a very robust mechanical structure. As a result, over 1200 Wh/L and 450 Wh/kg levels of energy density were achieved in lithium-ion cells with a cycle life in the hundreds of cycles and fast charging in under 10 minutes, enabling new devices and applications.
Electrochemistry Innovation Manager
Toward advanced LMP® batteries : commercial generations and innovation trends
BlueSolutions has been commercializing all-solid state batteries since 2011. EVs, buses and stationary applications are the main targets of its research and development program. After more than 15 years, this Bolloré group subsidiary masters all the industrial processes for the production of a unique solid state battery technology. The know-how goes from the transformation of the lithium ingots to the integration of the battery packs within the applications. Importantly, a low-ecological footprint process has been stated for both the positive electrode and the polymer electrolyte manufacturing.
In order to get incomparable energy densities, today, all the industrial actors of lithium batteries are hardly working on the lithium metal technology. In this context, BlueSolutions has a unique 10 years feedback regarding both the behavior of this special anode and of the solid-state electrolyte.
After having spread the first pack generation for 8 years all-over the world, an optimized 650V battery pack addressing the e-buses market is being delivered for one year. To match with customers expectations this new generation offers optimized performance and a very long cyclability. In the meanwhile, BlueSolutions has already started working on its future generation products. While the current battery is LFP-based and cycles at a nominal temperature of 80°C, a lot of efforts are dedicated to improve the actual chemistry. Research programs are conducted on the development of a new positive electrode with higher energy density, new electrolytes that will be compatible with high-voltage materials and which have high conductivity at ambient temperature and optimized lithium electrode. In fine, the goal is to keep the intrinsic safety of the polymer solid electrolyte, while benefiting from the promising performances of new electrode materials.
Sr Principal Scientist
Advances in Carbon Conductive Additives for LIB Applications
Through a broad portfolio of advanced carbons that includes carbon nanotubes (CNT), carbon black (CB), and carbon nanostructures (CNS), Cabot Corp. has brought the world leading solutions of conductive carbons for lithium ion batteries (LIBs).
Cabot’s research and development team has worked to optimize the usage and function of conductive materials in LIBs. In cathodes, high aspect ratio CNTs, show clear benefits in imparting electronic conductivity at the lowest loadings across an electrode film. While, aciniform carbons, CBs, can make many contact points with lithium containing active materials for efficient ionic conductivity, as well as provide the space necessary for Li+ transport, while balancing the cost and processability challenges of CNTs. In silicon containing anodes, CNS is a new class of novel crosslinked CNT materials that greatly improve the cycle life of the cell. This has been shown through electrochemical testing of model cells.
Conductive carbons continue to be a key material technology in LIB. Cabot continues to work to optimize their function in LIBs with the goal of enabling LIB makers to develop winning cell designs by pushing developments in energy density and cycle life among others.
Cathode Materials For Lithium Ion Batteries – Target actual Comparison: Limitations & Opportunities
The cathode material gives a lithium-ion cell its decisive characteristics. It is therefore an important factor, especially with regard to the ever-increasing demands on energy density. We would like to show you which special parameters are important when choosing the right cathode material and we will go into the current trends and developments in this area. We will not only share information about the electrochemical characteristics but also examine challenges in processing, the cell design and the economic as well as ecologic components.
Nano-porous silicon for high-energy silicon-dominant batteries
A major improvement for the next generation of Li-ion batteries is the introduction of silicon as material for the anode, bringing capacity and fast charging to the next level. The biggest challenge of applying silicon-dominant anodes in Li-ion batteries, is silicon's tendency to expand during cycling.
E-magy has invented and manufactures micron-sized silicon particles with nanopores that overcome this challenge by containing that expansion within the nanopores themselves. Li-ion batteries with anodes made of E-magy silicon hold 40% more energy than those made of graphite. It's the low-cost, drop-in solution compatible with existing production lines that the EV industry needs – as currently verified by R&D managers of more than a dozen leading automotive and battery manufacturer brands.
Head of Laboratory Materials
Interface Stability in Solid-State Batteries
Solid-state batteries combining an alkali metal anode and a high-voltage cathode have the potential to double the energy density of current-generation rechargeable batteries. We recently demonstrated the integration of hydroborate solid electrolytes with a 4 V class cathode through in-situ formation of a passivating interface layer. Combined with their high ionic conductivity > 1 mS/cm at room temperature, low gravimetric density 1.2 g/cm3, low toxicity, high thermal and chemical stability, stability vs lithium and sodium metal, soft mechanical properties enabling cold pressing, compatibility with solution infiltration, and potential for low cost, hydroborate electrolytes represent a promising option for a competitive next-generation solid-state battery technology.
Founder and CTO
Commercial Ready High Energy Density Ultra-Fast Charge Cells
Why bother with fast charge for EV batteries? Charge rate goes beyond driver convenience - it addresses core EV adoption issues such as addressing the fact that only 20% of cars have access to overnight charging, fast charging helps improve existing infrastructure utilization, and it supports drivers becoming more comfortable with less expensive vehicles that have shorter range lowering the price for those vehicles. Enevate is a battery technology company supplying breakthrough Extreme Fast Charge Technology with its pure silicon-dominant cells that are solving these crucial EV adoption issues.
Deputy Manager, Chem Surface Tech
New anode concepts for solid state batteries
The lithium/ electrolyte interphase is still a bottleneck for efficient and reversible ionic transport in solid state batteries.
In this presentation alternative anode concepts based on 100 % silicon, silicon/carbon composites and porous carbons will be introduced.
All material concepts have been investigated in thiophosphate-based solid state batteries and performance data will be discussed.
Front Edge Technology
CEO & Co Founder
Cathode and anode considerations in the development of all solid-state Lithium battery
A stable solid-state electrolyte material is only part of the solution to an all-solid- state Lithium battery. Li ionic conductivity in cathode is as important for energy density, power density and charge rate. The morphology of metallic lithium formed on electrolyte surface when charging is a major factor controlling the safety and cycle life.
This presentation will discuss the cathode and anode development at Front Edge Technology for a LiCoO2/LiPON/Li battery system.