Aerosol Jet Printed 3D Interconnects for Display Applications

Optomec’s Aerosol Jet technology has a unique solution to enable panel front to backside connections without glass vias or vacuum processes. Aerosol Jet’s ability to print at high resolution, down to 10 μm, and at a high aspect ratio, as high as 5mm from the substrate regardless of topology, make it the ideal solution for both manufacturing and repair of metallization on glass edges. Demonstration of high speed, high density printing of connections from the front side of a panel to the backside will be shown along with repair of existing metallization created by other methods.

Bryan Germann
Product Manager @ Optomec

Bio

Optomec’s Aerosol Jet technology has a unique solution to enable panel front to backside connections without glass vias or vacuum processes. Aerosol Jet’s ability to print at high resolution, down to 10 μm, and at a high aspect ratio, as high as 5mm from the substrate regardless of topology, make it the ideal solution for both manufacturing and repair of metallization on glass edges. Demonstration of high speed, high density printing of connections from the front side of a panel to the backside will be shown along with repair of existing metallization created by other methods.