3D MEMS IMU enabled by Additive Packaging
Wearables RESHAPED USA 2026
10 June 2026
Mountain View, California
Computer History Museum:
1401 N. Shoreline Blvd.
Mountain View, CA 94043
MEMS inertial sensors hold great potential in providing low size, weight, power, and cost (SWaP-C) navigation solutions for many emerging applications including personal navigation, autonomous vehicles, unmanned aerial/underwater vehicles, and hypersonic fights. However, the intricate 3D assembly of a MEMS inertial measurement unit (IMU)—including MEMS and ASIC chips, circuit boards, and triad block—is susceptible to long-term drift driven by package-induced stress. This assembly complexity also increases the overall size and cost of the IMU. As a result, packaging has become a critical constraint on IMU performance, form factor, and cost.
Flexible hybrid electronics (FHE) can simultaneously address two prominent challenges in IMU packaging: 3D free-form packaging and stress relief for MEMS sensors. GE Aerospace, in partnership with Binghamton University, has been developing additively packaged MEMS IMU technology, aiming for significant improvement of IMU performance and reduction in SWaP. We have developed an aluminum nitride (AlN) based additive packaging process for high performance MEMS IMUs. Our approach begins with an additively printed AlN ceramic IMU frame. AlN ceramic offers over a 70% reduction in CTE mismatch with silicon MEMS dies compared to alumina, resulting in more than 3X improvement in thermally induced drift. The next step involves attaching MEMS chips, ASIC chips, and passive components onto the AlN frame and additively printing conductive traces and dielectrics to provide interconnects. The additive packaging technology allows us to reduce the complex multi-component IMU assembly into a compact, single-component IMU that can be directly pick-and-placed onto a system control board to provide full six-axis inertial navigation. By integrating MEMS with flexible hybrid electronics, this IMU achieves ultra-low SWaP-C and excellent stability, making it well-suited for operation in harsh environments.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


