Printed Resistors for Low-Cost Sustainable, Semi-Additive PCBs
Electronics RESHAPED USA 2026
10 June 2026
Mountain View, California
Computer History Museum:
1401 N. Shoreline Blvd.
Mountain View, CA 94043
Embedded resistors provide a pathway to reduce surface-mounted component counts, enable more compact PCB architectures, and improve electrical performance through reduced parasitics. Despite these advantages, adoption in domestically manufactured printed circuit boards remains limited. Current state-of-the-art embedded resistor technologies, for example, resistor foils, rely on subtractive fabrication processes involving multiple lithography and etching steps. These processes increase manufacturing complexity, energy consumption, and hazardous waste generation, which contribute to higher costs and constrain broader implementation in high-volume PCB manufacturing.
In this work, we investigate additive manufacturing approaches for embedded resistors as a potential alternative to conventional foil-based technologies. The project focuses on the development and evaluation of printed thick-film resistors deposited directly onto PCB substrates using commercially available resistive inks. Target performance metrics include resistance tolerance values comparable to industry benchmarks for foil-based embedded resistors, with an initial focus on approximately 50 Ω. Early-stage device development employs direct-write printing and laser milling to rapidly prototype resistor geometries and test fixtures. These approaches enable systematic evaluation of inks, printing parameters, and resistor design. Environmental and reliability testing is also underway to characterize stability under conditions relevant to electronics manufacturing and operation, including elevated temperature exposure, humidity aging, and resistance drift over time. Attention is also given to temperature coefficient of resistance and long-term stability as key performance metrics.
In parallel with electrical characterization, the project evaluates the manufacturability and lifecycle implications of multiple resistor integration strategies. Comparative analyses are being conducted to assess surface-mounted resistors, foil-based embedded resistors, and printed thick-film resistors with respect to manufacturing cost, process complexity, and energy consumption. A techno-economic analysis is being performed to compare these approaches within the context of current fabrication workflows, with particular attention to the cost and practical implications of integrating additive resistor technologies into existing production lines. The results will inform ongoing fabrication efforts to transition from direct-write prototyping methods to higher-throughput techniques, including screen printing and stenciling, with an emphasis on scalability and compatibility with established PCB manufacturing processes.
The presentation will report progress in materials screening, device fabrication, and reliability evaluation. It will also identify limitations associated with current commercially available resistive inks and additive processing methods. Finally, the work will outline key materials and manufacturing challenges that must be addressed to enable broader adoption of printed embedded resistors, along with recommendations for future materials development and process innovations that support sustainable and secure domestic electronics manufacturing.
This material is based on research sponsored, in part, by Air Force Research Laboratory under agreement number FA8650-20-2-5506, as conducted through the hybrid electronics manufacturing innovation institute, NextFlex. The U.S. Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon.
The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of Air Force Research Laboratory or the U.S. Government.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


