top of page

Ingo Wirth

Project Manager Smart Systems

Fraunhofer IFAM

​

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Printed sensors for structural health monitoring of composite components

Printed Electronics Innovation Day | Winter 2024

Display Innovation Day | Winter 2024

11 December 2024

Online

TechBlick Platform

In aviation industry, there exists an increasing demand for structural health monitoring (SHM) of carbon fiber reinforced composite materials (CFRP), which are needed for aerospace structures because of their unique stiffness to weight ratio. The challenge in such a context is to integrate smart systems in composites for lightweight constructions using different sensors without mechanically changing the structural behavior of the host structures (low weight addition and as small as possible stiffness modification). Innovative printing technologies allow the integration of printed sensors in composite parts and components by satisfying these criteria. For this purpose, manufacturing and integration process of sensors in composite parts using printing technologies was investigated. Piezoelectric sensors as well as temperature sensors were deposited directly on composite aeronautics parts representative of the aeronautic industry using screen printing and Aerosol Jet printing technologies. As an architecture network, printed individual sensors can be connected to an overall system.
The great advantage of printing technologies is the possibility to deposit customized sensor structures directly on planar and non-planar surfaces. The usage of printing technologies results in a great accuracy, reliability, and cost reduction also in a later production process. The development of electrical conductive composites allows the deposition of conductive paths between the sensor structures on the part and finally a connection to the power supply unit. This allows for the realization of a complete sensor structure with low added weight and low intrusivity with respect to the host structure. The sensor technology platform itself offers a broad range of variations of piezoelectric sensor candidate architectures into manufacturing process. The printed sensor network consists of several connected piezoelectric sensors, which build a dynamical load and displacement sensitive element. To detect, localize, classify and quantify damage to CFRP parts, composite aeronautic structural elements may be monitored using data from such printed sensors. This innovative sensor technology can thus be used for SHM by providing a complete and continuous observation of the whole system in the aircraft, but also in any other application area having similar requirements.
Printed piezoelectric sensors can be used to detect and monitor structural deformation, damage, or fatigue in aircrafts, helping to ensure the safety and reliability of the aircraft. Furthermore, it can be used to monitor the vibration of aircraft engines, providing early warning of potential issues and helping to prevent costly engine failures. Printed temperature sensors are able to monitor temperature changes even in inaccessible places in engines. Overall, the use of printed piezoelectric sensors in aeronautics can help to improve the safety, efficiency, and performance of aircrafts.

Watch the 5-minute excerpt from the talk

Video highlights and other talks by this speaker appear here.

More presentations from
Fraunhofer IFAM

Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025

10 December 2025

Hybrid electronics compared to conventional PCBs: their advantages and challenges

Jonas Deitschun

TechBlick Platform

Online

Battery Materials: Next-Generation & Beyond Li-Ion Battery Technology 2025

10 February 2025

Printing technology as green alternative for thick layer Li Ion Battery electrode production

Mario Kohl & Daniela Fenske

TechBlick Platform

Online

Winter Innovations Festival: Sustainable, Additive, 3D, Flexible, Hybrid & Wearable Electronics (Free-To-Attend) 2023

8 December 2023

Development of printed circuits with integrated sensors on flexible foils

Sophie Gruetzmacher

TechBlick Platform

Online

The TechBlick Platform: Why Join?

Onsite Admission

With your Hybrid Individual or Group Pass, you can attend one or more of our world-class conferences and exhibitions around the world, including Electronics RESHAPED USA or Europe, MicroLED Connect, AR/VR Connect, Perovskite Connect, Sustainable Electronics RESHAPED, and more…

CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page