Selective microscale sintering for next generation of bump fabrication
The Future of Electronics RESHAPED 2025 USA
11 June 2025
Boston, USA
UMass Boston
The Nanoscale Design and Manufacturing Laboratory (NDML) at the University of Texas at Austin focuses on the design and development of novel processes and equipment for the manufacturing of micro and nanoscale devices and structures. This talk will focus on a new microscale additive manufacturing process, known as microscale selective laser sintering (μ-SLS), that has been developed in the NDML for the fabrication of 3D electronic interconnect structures with micron scale resolutions. In this process, a thin layer of nanoparticle ink is first spread onto the substrate. The substrate is then positioned under an optical subsystem using a custom built nanopositioning device. A laser that has been focused off a micromirror array is then used to sinter the nanoparticles together in a desired pattern with micrometer resolution. Another layer is then coated onto the substrate and the process is repeated to build up the 3D structure. Finally, the unsintered nanoparticles are washed away to reveal the final 3D part. This talk will present the materials science, mechatronic systems, optics designs, and process modeling used to make this additive manufacturing process capable of achieving micrometer resolution with high throughput (~63 mm3/h) over large areas (~ 50 mm x 50 mm) and thus break the conventional tradeoff between resolution and throughput in microscale metal 3D printing.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


