New laser platform for research and pilot production enables opportunities in perovskite PV.
Perovskite Connect 2026
22 October 2026
Berlin, Germany
Estrel Berlin Hotel & Convention Center:
Sonnenallee 225, 12057 Berlin
We recently developed a new set of laser platforms for research in pilot production of perovskite solar cells and module productions. Now it is possible to process modules with up to 1 square meter size.
The optimum laser wavelength for processing perovskite solar cells depends on the particular layer and the whole layer stack. Therefore, all tools have 3 wavelengths (IR, green, and UV) in one tool. The wavelength can be changed via computer. It is also possible to process with two wavelengths at the same time. This has benefits when 2 layers need to be erased at the same time but both layers have different absorption. Or if an ablation process and a cleaning step is required at the same time.
When developing the laser processes for PSC, it is not clear from the beginning if the layers need to be processed from the glass side or from the film side. Our tool has 2 processing heads: one below the substrate for glass side ablation and over the substrate for film side ablation. The platform allows processing in both configurations to compare the results afterwards.
For research and pilot production, not high throughput is needed but the investment needs to be lower. We made one platform for several processes. Only one tool is needed for P1, P2, P3 scribing and P4, laser edge deletion (LED) or laser contact cleaning (LCC). An additional top hat IR laser can be integrated for very fast LED or a green laser for fast LCC.
To ensure high precision processing, we implemented a new scribe tracking and position correction system. This new development is precise and very cost-effective.
The tool is very flexible. Users can adapt it to new requirements themselves.
We also offer now a top hat fiber-coupled diode laser for photoluminescence (PL) for integration into our tools. To be sensitive to different band gaps, we offer 976, 808, 520, and 450 nm.
Also available are process heads for glass cutting, glass drilling, and glass welding.
We will present first results of process development and new concepts for laser interconnection like „point contacts“ or semi-transparent modules for building integrated PV (BI PV) that will be enabled with this platform.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


