Amin M'Barki | Hummink: Can capillary printing repair microLED backplanes and re-add bumps at one-to-two micron scale?
06:12 - 07:34
Other snippets from this talk
Summary of the clip:
Can capillary printing repair microLED backplanes and re-add bumps at one-to-two micron scale?
The process can tackle metal line and pad repair on the back plane. It repairs open defects in the TFT back line down to two-micron line widths. It also repairs landing and bonding pads on the back plane. When bonding micro LEDs, damaged pads can be repaired, using existing silver and gold inks, with resolution down to two micron, even one micron if needed.
Special inks allow 3D features. In one step, the process can do a bump with a varying aspect ratio down to five micron in terms of bump width. This addresses defects in micro LEDs: remove the defective micro LED, repair the pads under it, put back the bump, and integrate a new micro LED if the previous one is defective.
The material available right now is silver, but indium is being developed to target the lowest resolution, scheduled for release next year. The process is also compatible with a wide range of materials and is compatible with quantum dots.
In this short video, you can learn:
* Open defects in TFT back lines can be repaired at two-micron line widths.
* Damaged microLED bonding pads can be repaired with silver and gold inks down to two micron, or one micron if needed.
* Special inks produce 3D bumps with varying aspect ratios down to five-micron bump width, enabling defective microLED replacement.
📋 **Clip Abstract** Metal lines and pads on microLED backplanes can be repaired at two-micron line widths, with silver and gold inks reaching one micron if needed. Special inks add 3D bumps down to five-micron width, while indium is scheduled next year and quantum dots remain compatible.
About the speaker:
* Speaker: Amin M'Barki
* Company: Hummink
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#MicroLEDRepair, #TFTBackplaneRepair, #SilverGoldInk, #IndiumInk, #AdditiveElectronics, #PrintedElectronics
This is a highlight of the presentation:
HPCaP: Breaking the micron barrier
More Highlights from the same talk.
01:07 - 03:06
How do a vibrating 10 cm resonator and a pipette deposit ink with no pressure or electric field?
How do a vibrating 10 cm resonator and a pipette deposit ink with no pressure or electric field?
HPCap combines a fountain-pen concept with AFM tapping mode. A cantilever vibrates at resonant frequency; here it is a macro resonator about 10 centimeters, paired with simple quasi pipettes filled with ink. The resonator oscillates, and its resonance frequency is monitored as the pipette approaches the substrate.
Once close, a shift in resonance frequency signals the tip is something like 100 nanometers from the surface. Then a meniscus of ink is created between pipette and substrate. By continuing to monitor resonance frequency, the system keeps tip-to-substrate distance stable and controls where ink is deposited.
What differs from other approaches aiming at the same resolution is the AFM component: it stays very close to the surface, so only capillary force is needed for deposition. No pressure is applied. No electric field focuses the ink. Only capillary force is involved in depositing the ink.
In this short video, you can learn:
* A macro resonator about 10 centimeters replaces the small cantilever and vibrates at resonance.
* Resonance-frequency shift detects proximity around 100 nanometers and stabilizes tip-to-substrate distance.
* Deposition relies only on capillary force; no pressure or electric field is used to focus the ink.
📋 **Clip Abstract** HPCap draws from a fountain pen and AFM tapping mode: a 10-centimeter macro resonator with quasi pipettes filled with ink. By monitoring resonance frequency, it detects a shift near the surface, creates an ink meniscus, and deposits using only capillary force—no pressure or electric field.
About the speaker:
* Speaker: Amin M'Barki
* Company: Hummink
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#AFMTappingMode, #CapillaryForceDeposition, #ResonanceFrequencyMonitoring, #MacroResonator, #AdditiveElectronics, #PrintedElectronics
About this talk
→ HPCaP: Breaking the micron barrier · Amin M'Barki · TechBlick Innovations Festival July 2026

