André Bausch, Florian Ullrich | Dr. Jean Bausch GmbH, InnovationLab GmbH: Can an €8 sensor replace articulating paper for implantology and ceramic restorations?
21:57 - 22:49
Other snippets from this talk
Summary of the clip:
Can an €8 sensor replace articulating paper for implantology and ceramic restorations?
The cost comparison is explicit: the electronic solution costs more, while articulating paper and its production remain much less in price. That does not make the sensor a universal replacement. Combined use is described: for a simple composite filling, the dentist would not take the Oclusense system and still uses articulating papers and foils.
For higher-value work, the choice changes. In implantology and ceramic restorations, which are very expensive, dentists choose Oclusense to make sure there is not too much pressure on the occlusal surface. The sensor is not positioned as cheaper than paper; it is positioned where the cost of the restoration justifies the electronic solution.
The stated price point is around €8 per sensor, paid by the dentist. Paper remains cheaper per procedure, so adoption is selective: simple composite fillings stay on paper, while expensive implantology and ceramic cases use Oclusense to avoid excessive occlusal pressure. The result described is a hybrid workflow rather than a straight replacement of articulating paper.
In this short video, you can learn:
* The electronic Oclusense solution costs more than articulating paper, whose production remains much less expensive.
* For a simple composite filling, the dentist would not take the Oclusense system and still uses articulating papers and foils.
* Dentists choose Oclusense for implantology and ceramic restorations to ensure there is not too much pressure on the occlusal surface, at around €8 per sensor.
📋 **Clip Abstract** The clip compares an electronic Oclusense sensor with articulating paper and states that paper and its production remain much less in price. It shows selective use: simple composite fillings stay on papers and foils, while implantology and ceramic restorations use the roughly €8 sensor to check occlusal pressure.
About the speakers:
* Speakers: André Bausch, Florian Ullrich
* Companies: Dr. Jean Bausch GmbH, InnovationLab GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#OclusenseSensor, #ArticulatingPaper, #OcclusalPressure, #CeramicRestorations, #PrintedElectronics, #DentalSensors
This is a highlight of the presentation:
High-Volume of Printed Electronics: The LAB-2-FAB concept and industrial R2R printing
More Highlights from the same talk.
05:41 - 07:58
How do you scale a printed pressure-sensor prototype to 1.3 million units per year on roll-to-roll?
How do you scale a printed pressure-sensor prototype to 1.3 million units per year on roll-to-roll?
The prototype digital articulating paper was scaled to roll-to-roll fabrication on a 70-meter label printing machine modified for electronics. It runs thousands to 100,000 pieces for field tests and market entry. Five printing slots can host screen printing, flexo, gravure and slot-die coating, plus heating and converting, enabling complex advanced systems.
Once the process is proven on the roll-to-roll machine, it transfers to Heidelberg in Wiesloch, within a one-hour printing distance. Heidelberg handles industrial production, including three-shift operation. Its similar but newer machine prints more layers in one pass and has a longer drying section, allowing the whole area of a tennis court to be printed in one hour.
That capacity supports any quantity: Bosch received 1.3 million sensors in the last year alone. The model separates field-test and market-entry volumes at the 70-meter roll-to-roll line from industrial volume at the newer production site. Five printing slots, multiple printing techniques, heating mechanisms and converting make the line versatile enough for highly complex printed systems.
In this short video, you can learn:
* A 70-meter roll-to-roll label printing machine, modified for electronics, produces thousands to 100,000 pieces for field tests and market entry.
* Process transfer from the development line to the newer production site enables three-shift industrial production with more layers per pass and longer drying.
* Heidelberg’s line can print the area of a tennis court in one hour and delivered 1.3 million Bosch sensors in the last year.
📋 **Clip Abstract** A digital articulating paper prototype was scaled to a 70-meter roll-to-roll label printing machine with five printing slots for screen, flexo, gravure and slot-die coating. Proven processes transfer to Heidelberg’s newer industrial line, which prints more layers per pass and delivered 1.3 million Bosch sensors in the last year.
About the speakers:
* Speakers: André Bausch, Florian Ullrich
* Companies: Dr. Jean Bausch GmbH, InnovationLab GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#RollToRollLabelPrinting, #SlotDieCoating, #PrintedPressureSensors, #DigitalArticulatingPaper, #PrintedElectronics, #FlexibleHybridElectronics
23:38 - 24:28
Can printed pressure-matrix foils inside EV battery packs extend battery life by 30%?
Can printed pressure-matrix foils inside EV battery packs extend battery life by 30%?
A pressure-matrix foil can be placed directly inside an electric-vehicle battery pack, and the work is being done with a huge German car manufacturer. The stated goal is battery health monitoring: the foil delivers a spatial distribution of the pressure inside the pack rather than a single-point reading. That map is the sensor output the application is built around, and it sits inside the battery itself, not beside it.
The capability is framed as exclusive to printed and flexible electronics: it is only possible this way, not with conventional measuring. A rigid, conventionally instrumented approach cannot deliver the in-pack spatial pressure distribution the customer needs. That distinction is the technical argument for printing the sensor matrix instead of retrofitting discrete gauges into the battery housing.
The commercial payoff is stated by the customer: they are able to prolong battery lifetime by 30% and more, which is described as enormous given what is currently happening in the electric-vehicle market. The same pressure-matrix foil is, in the speakers' words, also possible to print on roll-to-roll right now, putting the application within reach of high-volume production.
In this short video, you can learn:
* A printed pressure-matrix foil placed inside an EV battery pack yields a spatial distribution of pressure for battery health monitoring.
* The speakers say this is only possible with printed and flexible electronics, not with conventional measuring methods.
* The customer reports battery lifetime prolonged by 30% and more, and the foil is already printable roll-to-roll today.
📋 **Clip Abstract** A pressure-matrix foil printed into an electric-vehicle battery pack maps pressure spatially for battery health monitoring, a task the speakers say conventional measurement cannot perform. Their German car manufacturer customer reports 30% or more battery lifetime extension, and the foil is already roll-to-roll printable.
About the speakers:
* Speakers: André Bausch, Florian Ullrich
* Companies: Dr. Jean Bausch GmbH, InnovationLab GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#PressureMatrixFoil, #BatteryHealthMonitoring, #RollToRollPrinting, #EVBatteryPack, #PrintedElectronics, #FlexibleElectronics
15:01 - 17:16
What design constraints turn articulating paper into a 60-µm, 256-level digital pressure sensor?
What design constraints turn articulating paper into a 60-µm, 256-level digital pressure sensor?
Dentists have used articulating paper since 1953, so the digital product had to be used the same way, while adding visibility of masticatory pressure distribution across the jaw. Colour coding was a hard requirement: the clinician must see on the patient's teeth exactly where the contact points are and adjust them. The sensor plugs into a hardware device that transfers data to an iPad for review.
Graphical enhancements include percentage readouts showing where pressure is going, plus 2D and 3D views that evaluate occlusion in 256 pressure levels. A single sensor supports roughly 20 uses for the same patient during the same treatment. On the teeth the result combines the blue paper with the red Oclusense coating, so the clinician reads printed colour and digital data together.
The whole sensor is only 60 micrometres thin, which is what makes lateral movements visible: occlusion is not a static situation. Chewing involves a 3D system of the jaw, so the jaw can be moved in every direction during recording, and the thin printed sensor follows those movements rather than blocking them.
In this short video, you can learn:
* Colour coding is non-negotiable because the clinician must localise exact contact points on the teeth before adjusting them.
* A single 60-µm sensor is reused approximately 20 times per patient within one treatment.
* The 60-µm build preserves lateral jaw movement, so occlusion is recorded dynamically instead of as one static bite.
📋 **Clip Abstract** A printed occlusal sensor reproduces the handling dentists know from articulating paper while adding colour-coded masticatory pressure distribution, 2D and 3D views and 256 pressure levels on an iPad. At 60 micrometres thin and reusable around 20 times per treatment, it captures lateral jaw movement rather than a single static contact.
About the speakers:
* Speakers: André Bausch, Florian Ullrich
* Companies: Dr. Jean Bausch GmbH, InnovationLab GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#OclusenseCoating, #OcclusalContactPoints, #256PressureLevels, #MasticatoryPressureMapping, #PrintedElectronics, #FlexibleSensors
Links to this speaker's talk page and other highlights appear here.


