top of page

Andreas Tschepp

JOANNEUM RESEARCH

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Andreas Tschepp | JOANNEUM RESEARCH: Can printed sensors capture a 15 ms drop-tower impact and online nip pressure on 9 m rollers?

07:39 - 09:39

Other snippets from this talk

Summary of the clip:

Can printed sensors capture a 15 ms drop-tower impact and online nip pressure on 9 m rollers?

In a drop-tower test, a large weight was applied to a honeycomb structure with an F12 ridge higher on one side. On the bottom side, a load cell measured force, while four printed sensing elements sat beneath the structure. Their individual signals are shown, and summing them produces the red curve that corresponds directly to the force in between.

Such real-time pressure distribution measurements were performed in applications, and the sensors are quite fast: the whole drop-tower event happened in 15 milliseconds. That speed is the point of the demonstration, because summing the four element signals still tracks the force directly through a 15 millisecond impact.

For industrial environments, nip pressure measurements used printed sensors applied directly on the roller core beneath the cover layer. This system measures nip pressure between rollers online, with roller lengths up to nine meters and many sensing elements distributed around them.

In this short video, you can learn:
* Four printed sensing elements under a honeycomb structure summed to a red curve matching load-cell force directly.
* The complete drop-tower impact lasted 15 milliseconds, captured by fast printed sensors.
* Printed sensors placed on the roller core beneath the cover layer enable online nip pressure measurement across rollers up to nine meters long.

📋 **Clip Abstract** Printed pressure-distribution sensors captured a drop-tower impact on a honeycomb structure in 15 milliseconds, with four elements summing to match load-cell force. The same printed approach, mounted on roller cores beneath cover layers, measures nip pressure online between rollers up to nine meters long.

About the speaker:
* Speaker: Andreas Tschepp
* Company: JOANNEUM RESEARCH
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#PrintedPressureSensors, #NipPressureMeasurement, #DropTowerImpact, #PressureDistributionMapping, #PrintedElectronics, #AdditiveElectronics

This is a highlight of the presentation:

Printed Electronics - Pressure Distribution Measurements

Innovation Festival: Additive, Printed, Sustainable Electronics

Innovation Festival: MicroLEDs and AR/VR Displays

46213

Online Platform

Organised By:

TechBlick

TechBlick and MicroLED Industry Association

More Highlights from the same talk.

05:45 - 07:40

How do printed ferroelectric sensors convert charge to force, and why can't they measure truly static pressure?

How do printed ferroelectric sensors convert charge to force, and why can't they measure truly static pressure?

Calibration places the sensors in a steel base with a load cell underneath. Pressure is applied on top, up to four kilonewton, while the sensor output current is measured. The ferroelectric sensing element produces different outputs. On the test bench, forces up to 2,000 kilonewton are applied and different charge responses recorded.

The calibration output shows sensor charge in picocoulomb against force. The charge output can be directly connected to force via the D33, an inherent parameter. The slope of this curve gives the direct connection between charge and force. That is the main message: charge and force are linked by this ferroelectric response.

The measurement is quasistatic because ferroelectric sensors cannot easily, or possibly cannot at all, measure real static pressure. You can, however, design circuits so you do not lose too much information and hold the signal for, say, probably one day or something like that. This explains the quasistatic limitation.

In this short video, you can learn:
* Ferroelectric sensor charge output in picocoulombs can be directly connected to applied force via the D33 parameter.
* The slope of the charge-versus-force calibration curve gives the direct connection between charge and force.
* Real static pressure is not easy or not possible to measure with ferroelectric sensors, so circuits hold the signal quasistatically for about a day.

📋 **Clip Abstract** Ferroelectric pressure sensors are calibrated in a steel base with a load cell, applying up to four kilonewton and recording output current, while a test bench applies up to 2,000 kilonewton and records charge responses. Charge output in picocoulombs connects directly to force through the D33 parameter, whose slope defines the charge-force relationship; truly static pressure is problematic, so circuit design holds the quasistatic signal for roughly a day.

About the speaker:
* Speaker: Andreas Tschepp
* Company: JOANNEUM RESEARCH
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#FerroelectricSensors, #ChargeToForce, #D33Calibration, #QuasistaticPressure, #PrintedElectronics, #PressureMapping


About this talk

→ Printed Electronics - Pressure Distribution Measurements · Andreas Tschepp · TechBlick Innovations Festival July 2026

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page