Andrew Sculley | eMagin Corp: How much light do color-filter OLEDs waste, and what brightness roadmap does direct patterning enable?
15:31 - 17:13
Other snippets from this talk
Summary of the clip:
How much light do color-filter OLEDs waste, and what brightness roadmap does direct patterning enable?
Direct patterning replaces a white emitter plus color filter with red, green and blue emissive layers. In the color-filter approach, the middle red-orange and blue-green layers emit white light, and the filter throws away two-thirds of that light by design. Because the emitters are not 100% efficient, about 80% of the light can be lost. Direct patterning removes that filter loss.
With direct patterning, the layers around the red, green and blue can be common, and the structure can use high-efficiency fluorescent red and green plus fluorescent blue. This stops throwing away 80% of the light and gets much brighter. That is the claimed route to higher luminance without a color filter, while keeping a small-form-factor microdisplay as the target for immersive, high-contrast AR/VR.
Peak luminance has already been demonstrated at 7,500 nits in full color for a WUXGA display, with 10,000 nits peak luminance on track. Tandem OLED, used with white plus color filter, can also be applied to move beyond 10,000 nits. Tandem OLED is much easier to do on individual colors than on a white OLED, so direct patterning is ahead today and will remain ahead, with a roadmap to 30,000 nits.
In this short video, you can learn:
* Color-filter white OLEDs can lose about 80% of emitted light because the filter throws away two-thirds by design and emitters are not 100% efficient.
* Direct patterning uses common surrounding layers and high-efficiency fluorescent red and green plus fluorescent blue to avoid that filter loss.
* Full-color WUXGA peak luminance is demonstrated at 7,500 nits, 10,000 nits is on track, and tandem OLED plus a 30,000-nit roadmap extend the path.
📋 **Clip Abstract** Direct patterning replaces a white OLED plus color filter with red, green and blue emissive layers, avoiding a design that throws away two-thirds of the light by design and can lose about 80% overall. It has demonstrated 7,500 nits peak full-color luminance in WUXGA, targets 10,000 nits, and uses tandem OLED and a roadmap to 30,000 nits to extend brightness.
About the speaker:
* Speaker: Andrew Sculley
* Company: eMagin Corp
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#DirectPatterning, #ColorFilterLoss, #FluorescentEmitters, #TandemOLED, #OLEDMicrodisplays, #ARVRDisplays
This is a highlight of the presentation:
Displays for AR/VR
More Highlights from the same talk.
10:30 - 11:58
Why does a 4K microdisplay at 100° still fall short of the eye, and what do current VR headsets deliver?
Why does a 4K microdisplay at 100° still fall short of the eye, and what do current VR headsets deliver?
A 4,000-resolution OLED microdisplay paired with 100° field of view yields 40 pixels per degree, the talk states—though that example had not yet been put in a headset. The eye can see up to 60 pixels per degree, so 40 is not high enough for the best eyes and a little screen-door effect remains visible.
An Imagine 2K HMD demo used 2,000 resolution and an 80° field of view, giving 25 pixels per degree. Most people who saw it did not see any screen-door effect at all. From these examples, the talk says you need at least somewhere between 30 and 60 pixels per degree.
Current headsets named—Quest 2, HP Valve Index, HTC Vive and Sony PlayStation VR—do not even hit 25 pixels per degree, the speaker says. A field of view like 90° is a little small, so a higher field of view is needed. The conclusion is something like a 4K display for 100° field of view, plus refresh rate.
In this short video, you can learn:
* A 4,000-resolution microdisplay at 100° field of view gives 40 pixels per degree, below the eye’s up-to-60-pixels-per-degree capability.
* An 80° field of view with 2,000 resolution gives 25 pixels per degree, and most viewers saw no screen-door effect.
* Named current headsets do not reach 25 pixels per degree, and a 90° field of view is considered small, pointing to 4K for 100°.
📋 **Clip Abstract** The clip quantifies resolution demand by dividing display resolution by field of view: 4,000 resolution at 100° gives 40 pixels per degree, while 2,000 at 80° gives 25. It reports that the eye can see up to 60 pixels per degree, that current named headsets do not hit 25, and that a 4K display is needed for 100° field of view.
About the speaker:
* Speaker: Andrew Sculley
* Company: eMagin Corp
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#PixelsPerDegree, #ScreenDoorEffect, #OLEDMicrodisplay, #4KMicrodisplay, #ARVRDisplays, #NearEyeDisplays
12:10 - 13:14
Why does a 10% duty cycle force VR displays to 7,500–15,000 nits for only 150 nits to the eye?
Why does a 10% duty cycle force VR displays to 7,500–15,000 nits for only 150 nits to the eye?
Brightness in VR exists to eliminate motion artifacts, so the panel must be fast — 120 Hz is the figure quoted — with a duty cycle, or persistence as Oculus named it, under 100%. That means light is emitted for only a portion of each frame and the display is dark for the rest. The shorter the on-time, the higher the peak luminance must climb to deliver the same image.
Start from 150 nits to the eye — candela per square meter — and a 10% duty cycle. Every time these VR companies are asked, they say they want 10% or less, sometimes less. So the next question is optical efficiency: is the optic delivering 10%, or 20%? Whatever the display puts out, the optic gives back only that fraction.
Combine the duty cycle and the optic loss and the requirement lands at 7,500 to 15,000 nits, depending on which efficiency figure applies. Most companies put the target at 10,000 to 15,000 nits — in practice somewhat under 15,000. Those numbers are the entry ticket for immersive VR, and they are asked of the display, not of the eye.
In this short video, you can learn:
* VR brightness is a motion-artifact fix rather than a perceived-brightness fix: a 120 Hz display must run duty cycle, or persistence, below 100%.
* A 10% duty cycle combined with 10–20% optic efficiency converts a 150-nit eye requirement into a 7,500–15,000 nit display requirement.
* VR companies consistently ask for 10% duty cycle or less and cite 10,000 to 15,000 nits, settling just under 15,000.
📋 **Clip Abstract** VR brightness requirements are set by motion-artifact suppression, not by how bright the image should look: a fast display at 120 Hz must run duty cycle, or persistence, below 100%. Applying a 10% duty cycle, 150 nits to the eye and 10–20% optic efficiency yields a 7,500–15,000 nit display target, with customers settling in the 10,000 to 15,000 nit range.
About the speaker:
* Speaker: Andrew Sculley
* Company: eMagin Corp
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#DutyCyclePersistence, #OpticEfficiency, #MotionArtifactSuppression, #NitsAtTheEye, #NearEyeDisplays, #ARVRDisplayEngineering
About this talk
→ Displays for AR/VR · Andrew Sculley · Displays & Lighting: Innovations & Market Trends 2021


