Andriy Korchev | Cabot: What gives branched carbon nanostructures a fourfold loading advantage over conventional multiwall CNTs?
13:31 - 15:13
Other snippets from this talk
Summary of the clip:
What gives branched carbon nanostructures a fourfold loading advantage over conventional multiwall CNTs?
Carbon nanostructure, or CNS, is a distinct type of multiwall CNT. Two characteristics separate it from conventional multiwall CNTs. First, it is a branched CNT. Second, its aspect ratio is substantially higher than what is typically obtained from conventional multiwall CNT made by a CVD process. Both characteristics are critical for enabling strong electrical properties in the application.
A side-by-side demonstration used CNS powders against a traditional multiwall CNT. The comparison deliberately matched diameter, so the two additives were selected to be approximately the same diameter. That control matters: with diameter held constant, the observed change in required additive concentration can be attributed to the branched architecture and the much higher length and aspect ratio rather than to differences in tube diameter.
The measured outcome was about a fourfold reduction in the concentration of conductive additive required. At matched diameter, that 4x reduction is attributed directly to the two CNS characteristics: the structure being branched, and its much higher aspect ratio, much higher length. That is the practical claim: the branched, high-aspect-ratio morphology, not the tube diameter, carries the loading reduction.
In this short video, you can learn:
* CNS is a branched multiwall CNT with a substantially higher aspect ratio than conventional CVD multiwall CNTs.
* Matching tube diameter isolates morphology as the variable behind the measured loading change.
* The branched, high-aspect-ratio structure delivered roughly a 4x reduction in required conductive additive concentration.
📋 **Clip Abstract** CNS is described as a branched type of multiwall CNT whose aspect ratio is substantially higher than that of conventional CVD multiwall CNTs. In a comparison with tube diameter held about equal, those two features produced roughly a 4x reduction in the conductive additive concentration required.
About the speaker:
* Speaker: Andriy Korchev
* Company: Cabot
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#BranchedCNT, #HighAspectRatioCNT, #ConductiveAdditiveLoading, #CVDMultiwallCNT, #LiIonBatteries, #CarbonNanomaterials
This is a highlight of the presentation:
Advances in Carbon Conductive Additives for LIB Applications
More Highlights from the same talk.
06:19 - 08:32
Why does a tiny conductive-additive fraction dictate slurry rheology, gassing and usable energy density in EV cells?
Why does a tiny conductive-additive fraction dictate slurry rheology, gassing and usable energy density in EV cells?
Cell design for EV, PHEV and HEV uses different ranges of conductive carbons to hit the required power characteristics. In EV cells, space is at a premium, so the trend is toward conductive additives that are more efficient on a mass basis: materials must contribute significantly to storage rather than add mass without contributing significantly to storage.
Conductive carbons, whether CNTs or carbon blacks, are nanostructured and add substantial surface area. From a total-surface-area perspective in the electrode, their contribution is very considerable; in many cases it is larger than the total surface area of all other components. That is why slurries are impacted by carbons and why rheology must be considered.
High surface area and excessive van der Waals attraction make these materials hard to disperse, affecting slurry compatibility and stability. Because carbons are conductive and high-surface-area, they can also contribute to electrochemical parasitic reactions and gassing. Additive choice therefore must address trade-offs against the original design.
In this short video, you can learn:
* Different conductive-carbon ranges are selected across EV, PHEV and HEV designs to achieve the required power characteristics.
* Conductive carbons can contribute more total electrode surface area than all other components combined, so they strongly affect slurry rheology.
* High surface area and van der Waals attraction complicate dispersion, slurry stability and compatibility, while conductive carbon can also drive parasitic reactions and gassing.
📋 **Clip Abstract** Conductive additives are a small mass fraction but a dominant surface-area and rheology factor in lithium-ion electrodes. Their selection must balance power requirements, mass efficiency, dispersion, slurry stability and parasitic gassing against the original cell design.
About the speaker:
* Speaker: Andriy Korchev
* Company: Cabot
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#ConductiveCarbon, #SlurryRheology, #VanDerWaalsDispersion, #ParasiticGassing, #LithiumIonBatteries, #BatteryMaterials
18:28 - 19:52
Can CNS deliver single-wall-CNT cycle life in silicon-rich anodes without the single-wall price?
Can CNS deliver single-wall-CNT cycle life in silicon-rich anodes without the single-wall price?
In a silicon-rich anode system, the SEM image at 1 micron shows hairy structures that are essentially CNS connecting the particles. EDX maps below separate silicon and carbon, and still show some graphite in the anode design, though it is now heavily occupied with silicon. This microscopy frames how CNS is distributed through a silicon-heavy composite.
Cycling data from this silicon-rich system clearly show a very significant impact of CNS on extending cycle life. A single-wall CNT was also used for comparison, shown as the blue curve. Single-wall CNTs are known to be very effective conductive additives, but they are very pricey. The comparison sets up the CNS value proposition.
In this application, the value attributed to CNS is a balance: pursuing the cycle-life performance represented by the single-wall CNT comparison while avoiding the single-wall price. The silicon-rich anode still contains graphite, but silicon occupies it heavily, and CNS connects the particles. The cycling data are the evidence for extended cycle life.
In this short video, you can learn:
* SEM at 1 micron shows CNS as hairy structures connecting particles in a silicon-rich anode, with EDX mapping silicon and carbon.
* The anode design still contains some graphite but is heavily occupied with silicon.
* CNS significantly extended cycle life, while single-wall CNTs were effective but very pricey.
📋 **Clip Abstract** CNS is shown connecting particles in a silicon-rich anode via 1-micron SEM and silicon/carbon EDX maps, with some graphite still present. Cycling data show CNS significantly extends cycle life, and a pricey single-wall CNT comparison frames CNS as a balance between performance and cost.
About the speaker:
* Speaker: Andriy Korchev
* Company: Cabot
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#SiliconRichAnode, #CNSConductiveAdditive, #SingleWallCNT, #CycleLifeExtension, #LithiumIonBatteries, #BatteryMaterials
11:01 - 12:59
How low can CNT loading go in NCM523 or LFP cathodes when higher aspect ratio targets about 0.3% minimum concentration?
How low can CNT loading go in NCM523 or LFP cathodes when higher aspect ratio targets about 0.3% minimum concentration?
The SEM images compare conductive carbon nanotube powders with quite different diameters, moving from left to right across the series. NRmax 61 sits at the higher-aspect-ratio end: its surface area and diameter indicate a higher-aspect-ratio nanotube. The expectation is a material that provides the highest conductivity at lower loading, which is exactly what the percolation experiments are designed to test.
The classical experiment is a percolation study: formulate electrodes—here NCM523 or LFP—with conductive carbons and measure the loading needed to reach conductivity. The plot includes NR Mark 61 as the green line alongside other conductive carbon nanotubes. This work is done often for customers as an application package, showing the optimum loading for a given conductive additive relative to the active material.
For the green line, the example points to about 0.3% as the minimum concentration to use. That is the practical message from the percolation curve: higher aspect ratio shifts the useful CNT loading down to a very low level. The claim is that the industry is benefiting from this and that the value is clear for a conductive additive.
In this short video, you can learn:
* NRmax 61 shows a higher aspect ratio than the other carbon nanotube powders based on its surface area and diameter.
* Percolation studies in NCM523 or LFP identify the optimum conductive-carbon loading, with NR Mark 61 plotted as the green line.
* The green-line example indicates about 0.3% as the minimum concentration to use.
📋 **Clip Abstract** SEM comparison shows carbon nanotube powders with different diameters, with NRmax 61 at higher aspect ratio. Percolation studies in NCM523 or LFP indicate about 0.3% as the minimum concentration for the green-line CNT example, illustrating lower-loading conductivity.
About the speaker:
* Speaker: Andriy Korchev
* Company: Cabot
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#CarbonNanotubeAspectRatio, #NRmax61, #NCM523LFP, #PercolationLoading, #ConductiveAdditives, #LithiumIonBatteries
About this talk
→ Advances in Carbon Conductive Additives for LIB Applications · Andriy Korchev · Battery Materials: Next-Gen & Beyond Lithium Ion 2022


