Anja Hösel | NanoSen GmbH: Can electrode geometry alone set a force sensor's sensitivity range, from fine lines to wide spacing?
07:45 - 09:09
Other snippets from this talk
Summary of the clip:
Can electrode geometry alone set a force sensor's sensitivity range, from fine lines to wide spacing?
Our material is nearly compatible with nearly every electrode design, including concentric ring, interdigital, rectangle or round, and it does not care. Different inks and substrates such as TPU and PPT were tested for electrodes; compatibility works really well. That leaves sensor design free to adapt to requirements.
For sensitive measurement, make finer and thinner lines that are closer together. If a high range is needed rather than a small sensitive range, design electrodes with lines wider apart, and maybe a bigger area. This measures a bigger range and higher forcing than small sensors.
Combine the material with the electronics, and the sensor can be adapted to your process and your requirements. The electrode layout sets whether the response covers fine force or wide force. Geometry, ink and substrate choices therefore define the usable measurement window without changing the sensing material itself.
In this short video, you can learn:
* Electrode geometry can be concentric ring, interdigital, rectangular or round without affecting material compatibility.
* Finer, thinner, closer lines support sensitive measurement; wider-spaced lines and larger area support higher range and higher forcing.
* The material was tested with different inks and substrates, including TPU and PPT electrodes, and works well.
📋 **Clip Abstract** The clip shows that the sensing material is compatible with many electrode designs, including concentric ring, interdigital, rectangle and round. By changing line width, spacing and area, the same material can cover sensitive low-range measurement or higher-range, higher-forcing measurement, with tested inks and substrates such as TPU and PPT.
About the speaker:
* Speaker: Anja Hösel
* Company: NanoSen GmbH
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#InterdigitalElectrodes, #ConcentricRingElectrodes, #TPUSubstrates, #HigherForceRange, #FlexibleForceSensing, #PrintedElectronics
This is a highlight of the presentation:
Polymer Nanocomposites (PNC) with Force Sensing Impedance (FSI) – Reshaping the Future of Flexible Force Sensing
More Highlights from the same talk.
01:26 - 03:26
How do nanoparticles that never touch deliver both a resistance drop and a capacitance rise in one sensor?
How do nanoparticles that never touch deliver both a resistance drop and a capacitance rise in one sensor?
The sensor is made by putting the material onto the electrode. The resulting high-sensitivity sensor measures from one gram. With a 20-millimeter sensor, measurement extends up to 20 kilograms until saturation. Nearly 620 kilograms is needed to create overload capacity that causes damage. In testing, a car drove over it and nothing happened.
Durability was tested over 20 million cycles with 20 kilograms, or 200 newtons. After the car drove over the sensor, it still measured the weight of a coffee bean. The sensor holds temperatures from -20 up to 70 degrees Celsius. The material itself, because it is in silicone, can handle -20 up to 230 degrees.
The material has piezoresistive and piezocapacitive properties. When it is compressed on the electrode, the nanoparticles inside get closer together. They do not touch each other, but they become close enough that resistance drops and capacitance rises. An electronic circuit measures both signals.
In this short video, you can learn:
* A 20-millimeter sensor measures from one gram up to 20 kilograms before saturation, with damage only near 620 kilograms.
* It survived 20 million cycles at 20 kilograms or 200 newtons, a car drive-over, and still measured a coffee bean.
* Compression brings nanoparticles close without touching, dropping resistance and raising capacitance, and the circuit reads both signals.
📋 **Clip Abstract** The material is placed on an electrode to form a high-sensitivity sensor measuring from one gram to 20 kilograms on a 20-millimeter device. Compression moves nanoparticles closer without contact, dropping resistance and raising capacitance, while durability reaches 20 million cycles and temperatures from -20 to 70 degrees Celsius for the sensor and -20 to 230 degrees for the silicone material.
About the speaker:
* Speaker: Anja Hösel
* Company: NanoSen GmbH
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#PiezoresistivePiezocapacitive, #NanoparticleProximity, #ResistanceDropCapacitanceRise, #20MillionCycleDurability, #FlexibleForceSensing, #PiezoresistiveSensors
About this talk
→ Polymer Nanocomposites (PNC) with Force Sensing Impedance (FSI) – Reshaping the Future of Flexible Force Sensing · Anja Hösel · TechBlick Innovations Festival July 2026


