Anjusree Shyla | Solaires: How does a printable solar ink compare in stability and scalable coating performance against high-efficiency literature recipes?
07:22 - 08:53
Other snippets from this talk
Summary of the clip:
How does a printable solar ink compare in stability and scalable coating performance against high-efficiency literature recipes?
To test uniqueness, first reproduce the literature recipe reported for highest efficiency. It reached 22% power conversion efficiency, but stability was under 2 days. XRD peaks and film color change showed degradation. This formulation was not complete with scalable coating like blade coating; it may work for spin coating, a lab-scale technique.
For scalability, the same set of experiments was performed using the solar ink, with the stated aim of addressing industrial translation rather than lab-only coating. The solar ink was stable up to 104 days without any signs of degradation. The same formulation was demonstrated on aged ink-on-device, with no drop-off in efficiency observed for up to 42 days.
Blade coating provided the scalability test. A fresh batch of solar ink produced an actual power conversion efficiency of 15 to 16% for an active area of 1 centimeter square. That compares with 22% for the literature recipe that was not complete with scalable blade coating. The result pairs lower headline efficiency with 104-day ink stability and 42-day device stability.
In this short video, you can learn:
* The highest-efficiency literature recipe reached 22% but degraded in less than two days, shown by XRD peaks and film color change.
* The solar ink remained stable for up to 104 days, and aged ink-on-device showed no efficiency drop-off for up to 42 days.
* Blade coating a fresh ink batch yielded 15–16% power conversion efficiency on a 1 cm² active area.
📋 **Clip Abstract** A highest-efficiency literature recipe delivered 22% power conversion efficiency but stability below two days and was not complete with scalable blade coating. The solar ink instead remained stable up to 104 days, showed no device efficiency drop-off for up to 42 days, and gave 15–16% via blade coating on 1 cm².
About the speaker:
* Speaker: Anjusree Shyla
* Company: Solaires
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#SolarInkFormulation, #BladeCoating, #XRDStability, #PowerConversionEfficiency, #PerovskitePhotovoltaics, #ScalableSolar
This is a highlight of the presentation:
Perovskite Inks: Inks & Formulation For Printing Perovskite Photovoltaics
More Highlights from the same talk.
04:00 - 06:19
Which perovskite hurdles does a unique solar ink formulation target: stability and scalability or toxicity?
Which perovskite hurdles does a unique solar ink formulation target: stability and scalability or toxicity?
The clip identifies three major perovskite issues: stability, scalability and toxicity. Stability is challenged by degradation under environmental factors such as moisture, UV and oxygen, making the composition intrinsically unstable. Scalability is challenged because perovskite solar cells are multilayer systems; each layer's uniformity matters for electronic properties and target efficiency, yet uniformity is at stake when moving from lab to fab. Toxicity comes from lead.
Initial focus targets stability and scalability through a unique perovskite material formulation called Solar Ink. The formulation enables perovskite-based photovoltaic films with high energy conversion efficiency and stability under ambient conditions. No controlled environment is used for ink or device fabrication. The ink currently has a four-month shelf life, aiding shipment and storage. It is easy to synthesize and does not require expensive or custom-made equipment to scale up in large quantities.
The ink has been demonstrated using scalable fabrication processes such as slot die and blade coating. Work is underway to make it compatible with other industrially viable coating techniques including inkjet printing and spray coating. Lab-scale power conversion efficiency is 22%. Studies establishing device stability and lifetime are underway. The clip does not claim these stability or lifetime results are complete.
In this short video, you can learn:
* Perovskite degradation under moisture, UV and oxygen makes the composition intrinsically unstable.
* Layer uniformity is critical for electronic properties and is at risk when scaling from lab to fab.
* The solar ink enables ambient fabrication, four-month shelf life, scalable coating demonstrations and 22% lab-scale efficiency.
📋 **Clip Abstract** The clip outlines stability, scalability and lead toxicity as major perovskite issues, with initial work focused on stability and scalability through a unique solar ink formulation. It reports ambient ink and device fabrication, four-month shelf life, slot-die and blade-coating demonstrations, 22% lab efficiency, and ongoing stability and lifetime studies.
About the speaker:
* Speaker: Anjusree Shyla
* Company: Solaires
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#PerovskiteSolarInk, #SlotDieBladeCoating, #AmbientDeviceFabrication, #22PercentLabEfficiency, #PerovskitePhotovoltaics, #PrintableSolarCells
10:21 - 12:07
Why does a commercially available perovskite ink coat uniformly by spin coating but fail under scalable blade coating?
Why does a commercially available perovskite ink coat uniformly by spin coating but fail under scalable blade coating?
A perovskite ink already available in the market was purchased and blade coated over a large-area substrate. The result did not address the scalability issue of perovskite material: the film was non-uniform and contained pinholes, which the speaker says is not suitable for fabricating high-performance devices. The same ink was described as suitable for spin coating perovskite ink on a smaller area.
The comparison set the primary criterion for developing an in-house formulation: the ink must address scalability and suit industries that need roll-to-roll coating and must keep the ink for a long time. The left side of the comparison showed a solar ink giving a uniform coating, described as a significant factor for high-performance perovskite solar cells; the right side showed the non-uniform film with pinholes.
With that criterion, the formulation was made in-house and found to give better uniformity, or a coating, using a scalable coating process. The speaker also says the proper different properties, or fluid properties, of the ink have been tested. The transcript stops at that point, before detailing the fluid-property results.
In this short video, you can learn:
* A market-available perovskite ink produced a non-uniform, pinhole-containing film when blade coated over a large-area substrate.
* That same ink was suitable for spin coating on a smaller area, highlighting the scalability gap.
* The new formulation was designed for roll-to-roll coating and long ink storage, and it gave better uniformity in scalable coating.
📋 **Clip Abstract** A commercially purchased perovskite ink was blade coated over a large-area substrate and gave a non-uniform film with pinholes, despite being suitable for spin coating on a smaller area. The comparison motivated an in-house formulation aimed at roll-to-roll coating and long ink storage, which gave better uniformity using a scalable coating process, with fluid properties tested.
About the speaker:
* Speaker: Anjusree Shyla
* Company: Solaires
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#PerovskiteInk, #BladeCoating, #PinholeFormation, #RollToRollCoating, #PerovskitePhotovoltaics, #ScalableSolarCells
About this talk
→ Perovskite Inks: Inks & Formulation For Printing Perovskite Photovoltaics · Anjusree Shyla · The Future of Photovoltaics: Organic, Perovskites, CIGS, Hybrid 2021


