top of page

Benjamin Park

Enevate Corporation

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Benjamin Park | Enevate Corporation: What does third-party verified LCA data plus a 5-minute extreme fast charge actually buy an automaker?

03:11 - 04:21

Other snippets from this talk

Summary of the clip:

What does third-party verified LCA data plus a 5-minute extreme fast charge actually buy an automaker?

The clip centres on third-party verified LCA analysis as a market lever. Because of prior work with large EV manufacturers, the company has had to verify its carbon-footprint claims externally. Those studies support a claim of up to a 26% smaller carbon footprint. The speaker stresses this matters because many companies in the sector have not yet reached the point where they can make carbon-footprint claims.

On performance, the cell enables a 5-minute extreme fast charge. The speaker also cites a 20% lower cost while delivering about 30% more EV range. Additional claims include better low-temperature performance, better safety, and higher efficiencies in regenerative braking and charger utilization. These are presented together rather than as isolated trade-offs: fast charging does not have to come at the expense of range or cost.

The infrastructure implication is explicit: higher charger utilization and regenerative-braking efficiency help reduce the need for a larger charging network, while the vehicle performs better. The speaker frames the package as carbon footprint, charge time, cost, range, low-temperature behaviour, safety and efficiency—not a single headline metric. For automakers, that combination makes verified LCA data and extreme fast charge linked commercial requirements, not separate marketing claims.

In this short video, you can learn:
* Third-party LCA studies support a claim of up to 26% smaller carbon footprint.
* The pitch combines a 5-minute extreme fast charge, 20% lower cost and about 30% more EV range.
* Better low-temperature performance, safety, regenerative-braking efficiency and charger utilization are cited as supporting advantages.

📋 **Clip Abstract** Third-party verified LCA analysis supports a claim of up to 26% smaller carbon footprint, which many companies cannot yet make. The same pitch combines a 5-minute extreme fast charge with 20% lower cost, about 30% more EV range, better low-temperature performance and safety, and higher regenerative-braking and charger efficiency.

About the speaker:
* Speaker: Benjamin Park
* Company: Enevate Corporation
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#LCACarbonFootprint, #FiveMinuteFastCharge, #RegenerativeBrakingEfficiency, #LowTemperaturePerformance, #EVBatteries, #FastChargingInfrastructure

This is a highlight of the presentation:

Commercial Ready High Energy Density Ultra-Fast Charge Cells

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

11:20 - 13:03

How does a silicon-dominant anode with a custom electrolyte additive hit 4C–10C charging where graphite stops at 1C?

How does a silicon-dominant anode with a custom electrolyte additive hit 4C–10C charging where graphite stops at 1C?

The route is a silicon-dominant anode—almost all silicon on the anode side, with graphite not used as the main material—paired with a proprietary electrolyte approach. Today that remains a liquid standard electrolyte, but with a specific additive package. The additive is there to prevent side reactions and growth on the silicon surface, which is the interfacial problem the cell design has to manage.

Specific cell designs and cell-formation techniques are the third ingredient, making the cell behave as needed under fast charge. In 5-minute charge examples, the cells reach roughly 35–75% state of charge, versus a conventional graphite cell typically limited around 1C and reaching only about 6–7% in the same time. The demonstrations cover both 4C and 10C.

The 4C-to-10C range reflects automaker targets rather than one universal specification. A minimum fast-charge target appears to be charging a substantial amount in 15 minutes, roughly a 4C charge, while more aggressive companies are pursuing a 5-minute charge. That spread explains why the examples span 4C through 10C and why a 5-minute result can be framed as 35–75% charged.

In this short video, you can learn:
* A silicon-dominant anode, not graphite as the main material, is paired with a liquid electrolyte containing a proprietary additive package.
* The additive package suppresses side reactions and growth on the silicon surface.
* In 5-minute charging, the cells reach 35–75% versus roughly 6–7% for a graphite cell limited near 1C, with 4C–10C covering automaker targets from 15-minute to 5-minute charge.

📋 **Clip Abstract** A silicon-dominant anode with a proprietary additive package in a liquid standard electrolyte, plus specific cell designs and formation techniques, enables 4C–10C fast charge. Five-minute charging reaches 35–75% state of charge, compared with about 6–7% for a conventional graphite cell limited near 1C, spanning automaker targets from 15-minute to 5-minute charging.

About the speaker:
* Speaker: Benjamin Park
* Company: Enevate Corporation
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconDominantAnode, #ElectrolyteAdditivePackage, #CellFormationTechniques, #FiveMinuteCharging, #FastChargeBatteries, #LithiumIonBatteries

20:10 - 21:38

Why does removing graphite from a silicon-dominant anode reduce lithium plating and stabilize the SEI?

Why does removing graphite from a silicon-dominant anode reduce lithium plating and stabilize the SEI?

Silicon reacts with lithium at a different voltage than graphite. During charge, the anode voltage is reduced even as cell voltage rises, so silicon reacts first. In a combined silicon-graphite chemistry, silicon is driven to a highly lithiated, more reactive state before graphite reacts. That creates safety issues and leaves no buffer between the two reactions.

The technology does not use graphite as an active material. It uses silicon at a higher voltage because graphite does not have to be utilized. That higher-voltage operation leaves extra room, so lithium plating is avoided, and it leaves a buffer for capacity. These voltage and buffer effects are central to the safety argument.

The SEI layer also appears to be more stable in this graphite-free, silicon-dominant design. That stability is presented as one of the elements that make the cell safer. The safety case rests on three effects: reaction voltage order, extra room against lithium plating and capacity buffer, and a more stable SEI layer.

In this short video, you can learn:
* Silicon reacts with lithium before graphite during charge because its reaction voltage differs.
* Using silicon without graphite as an active material allows higher-voltage operation, leaving room that avoids lithium plating and provides a capacity buffer.
* The SEI layer appears more stable in the graphite-free silicon-dominant cell.

📋 **Clip Abstract** This clip explains why a graphite-free silicon-dominant anode can be safer than conventional lithium-ion: silicon reacts at a different voltage, and removing graphite avoids driving silicon into a highly lithiated state without a buffer. Operating silicon at higher voltage leaves room against lithium plating and capacity buffer, while the SEI appears more stable.

About the speaker:
* Speaker: Benjamin Park
* Company: Enevate Corporation
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconDominantAnode, #LithiumPlating, #SEIStability, #GraphiteFreeAnode, #BatterySafety, #LithiumIonBatteries


About this talk

→ Commercial Ready High Energy Density Ultra-Fast Charge Cells · Benjamin Park · Battery Materials: Next-Gen & Beyond Lithium Ion 2022

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page