top of page

Chiva Adireddy

Advano

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Chiva Adireddy | Advano: How do Generation 1, 2 and 3 silicon anodes differ, and which works in solid-state today?

09:17 - 10:11

Other snippets from this talk

Summary of the clip:

How do Generation 1, 2 and 3 silicon anodes differ, and which works in solid-state today?

Generation 1 anode material has dominated for 30 years: graphite, or graphite with minor portions of silicon oxide at just 3 to 5 percent. That incumbent chemistry defines the baseline any new silicon product must beat, and it sets the reference for how much active silicon can realistically be loaded before cycle life and electrode stability are compromised.

Generation 2 is the bridge: REALSi silicon is added to graphite, keeping the familiar host structure while raising capacity. Generation 3 removes graphite entirely, with no graphite used at all, and works with either a liquid electrolyte or a solid battery. That progression moves from incremental silicon oxide substitution to a fully silicon-based anode.

As of today, the nano silicon works amazingly well in Generation 3 batteries where 100 percent silicon is used as the anode material. Separately, some of the micro silicon is already being tested for solid-state batteries. So the answer to which generation works in solid-state today is micro silicon under test, while nano silicon is already proving out in graphite-free cells.

In this short video, you can learn:
* Generation 1 chemistry has held for 30 years with only 3 to 5 percent silicon oxide added to graphite.
* Generation 2 adds REALSi silicon to graphite, while Generation 3 eliminates graphite entirely for liquid or solid cells.
* Nano silicon performs well in 100 percent silicon Generation 3 anodes, and micro silicon is already in solid-state battery testing.

📋 **Clip Abstract** A three-generation roadmap splits silicon anode adoption by how much graphite remains in the electrode, from 3 to 5 percent silicon oxide blends up to graphite-free designs. Nano silicon is already delivering in 100 percent silicon Generation 3 cells, while micro silicon is the variant entering solid-state battery test.

About the speaker:
* Speaker: Chiva Adireddy
* Company: Advano
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconOxideBlend, #GraphiteFreeAnode, #NanoSiliconAnode, #MicroSiliconSolidState, #LiIonBatteryMaterials, #SolidStateBatteries

This is a highlight of the presentation:

Tailor-made REALSi for high-performance Li-ion batteries

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

03:08 - 04:36

Can battery-grade silicon skip silane, HF, CVD, graphene and nanowires entirely?

Can battery-grade silicon skip silane, HF, CVD, graphene and nanowires entirely?

The route starts with metallurgical silicon or upcycled scrap from the semiconductor industry, not specialty chemicals. The company positions itself as a materials processor rather than an oxide or graphene producer, converting silicon raw materials into battery-grade silicon that integrates into a variety of lithium-ion battery chemistries. Explicitly excluded from the process: silane gas, HF, CVD, nanowires and pillars.

Three value propositions are offered. First, silicon knowledge. Second, a choice of raw materials already produced in millions of tons today—an availability argument rather than a lab-scale supply argument. Third, a partnership structure framed so that partners win. The emphasis on existing commodity feedstock volumes is what separates this from routes built on specialty chemical inputs.

Scale is the framing: five years ago there was one Gigafactory; now 254 are in the pipeline, and the stated aim is for all of those players to produce better batteries year over year. Against that demand curve the portfolio opens with three solutions, the first being nano silicon—announced as the clip closes.

In this short video, you can learn:
* Battery-grade silicon can be derived from metallurgical silicon or upcycled semiconductor scrap without silane, HF, CVD, graphene, nanowires or pillars.
* The three stated value propositions are silicon knowledge, commodity raw materials produced in millions of tons today, and a partner-friendly structure.
* Gigafactory count has gone from one five years ago to 254 in the pipeline, with nano silicon named as the first of three solutions.

📋 **Clip Abstract** A materials processor converts metallurgical silicon and upcycled semiconductor scrap into battery-grade silicon for multiple lithium-ion chemistries, deliberately excluding oxides, graphene, silane gas, HF, CVD, nanowires and pillars. The pitch rests on silicon know-how, feedstock available in millions of tons, and a partnership model aimed at 254 pipeline gigafactories.

About the speaker:
* Speaker: Chiva Adireddy
* Company: Advano
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#BatteryGradeSilicon, #MetallurgicalSilicon, #SemiconductorScrapUpcycling, #NanoSilicon, #LithiumIonBatteries, #SiliconAnode

10:07 - 11:14

Why is adding just 10% silicon a bigger near-term win than replacing graphite completely?

Why is adding just 10% silicon a bigger near-term win than replacing graphite completely?

Silicon raises energy density, but the gain is not linear. The first 10% delivers the largest improvement, so getting 10% silicon into every battery is already a significant industry win. Beyond 10%, the additional gain is smaller. That nonlinearity makes low-silicon loading the practical near-term target rather than an all-or-nothing anode swap.

Replacing graphite completely with 100% silicon could yield really high energy density, but the timeline can be quite long. Meanwhile, micro silicon is already being tested for solid-state batteries, and Generation 3 batteries use 100% silicon as an anode material. The 10% route avoids waiting for a complete graphite replacement before capturing energy-density gains.

After commercializing real silicon, the mission with a partner is to demonstrate 10% addition to every battery. Commercialization is being accelerated with more than 20 partners, and new partners are being sought. This partner-heavy route targets the first-10% gain across batteries rather than a complete graphite replacement, shortening the path to market.

In this short video, you can learn:
* The energy-density gain from silicon is non-linear, with the first 10% providing the largest increase.
* Complete graphite replacement with 100% silicon may offer high energy density but can involve a long timeline.
* Micro silicon is already being tested for solid-state batteries, while commercialization targets 10% addition with 20+ partners.

📋 **Clip Abstract** Silicon boosts energy density non-linearly: the first 10% gives the largest gain, making 10% silicon addition a significant industry win. Complete graphite replacement with 100% silicon can deliver high energy density but may take a long timeline, so commercialization is targeting 10% addition across batteries with 20+ partners while micro silicon is already tested for solid-state batteries.

About the speaker:
* Speaker: Chiva Adireddy
* Company: Advano
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconAnodeLoading, #GraphiteReplacementTimeline, #MicroSiliconSolidState, #NonlinearEnergyDensityGain, #LithiumIonBatteries, #SolidStateBatteries


About this talk

→ Tailor-made REALSi for high-performance Li-ion batteries · Chiva Adireddy · Battery Materials: Next-Gen & Beyond Lithium Ion 2022

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page