Christoph Bosshard | KIMOTO: Is silicone contamination from your process films ruining your vacuum deposition steps?
06:48 - 08:31
Other snippets from this talk
Summary of the clip:
Is silicone contamination from your process films ruining your vacuum deposition steps?
Self-wetting adhesives are a popular choice for applying protection films, especially in display manufacturing, because they enable a bubble-free lamination that progresses automatically once initiated. The most common chemistry for these is silicone-based. The properties of these silicone adhesives, such as their thickness and hardness, can be precisely tuned to accommodate for small dust particles, making them effective even in non-ideal environments by engulfing specs to ensure a clear, bubble-free result.
Despite their excellent application properties, silicone-based adhesives present a major challenge in multi-step electronics manufacturing. Silicones are known to outgas and migrate, leading to contamination of the substrate surface and the processing equipment. This is a critical issue for any subsequent vacuum-based processes, such as sputtering or metal deposition, as the silicone residue will prevent proper adhesion and bonding of the new material layers, potentially ruining the entire device.
To solve this, a silicone-free, urethane-based self-wetting adhesive has been developed. This material provides the same key advantages of automatic, bubble-free lamination seen in its silicone counterparts but without the risk of contamination. By using a urethane chemistry, manufacturers can protect sensitive surfaces during handling and then proceed with subsequent vacuum deposition or bonding steps with confidence, ensuring a clean and reliable process flow.
In this short video, you can learn:
* The mechanism and benefits of self-wetting adhesives for bubble-free lamination.
* The critical problem of silicone contamination in vacuum chamber processes.
* How urethane-based adhesives provide a silicone-free alternative for sensitive applications.
π **Clip Abstract** Learn about self-wetting adhesives that enable easy, bubble-free application of protection films. Discover why common silicone-based versions can be problematic for vacuum processes and how urethane-based alternatives solve this critical manufacturing challenge.
π Link in comments π
#SelfWettingAdhesives, #SiliconeAdhesives, #UrethaneAdhesives, #VacuumDeposition, #AdvancedElectronicsManufacturing, #FlexibleElectronics
This is a highlight of the presentation:
Adhesive carrier and protection films for advanced manufacturing
More Highlights from the same talk.
05:32 - 07:50
When should a carrier film use acrylic, self-wetting silicone, or urethane adhesive?
When should a carrier film use acrylic, self-wetting silicone, or urethane adhesive?
The carrier film range comes in low-, medium-, and high-stick base versions so the material can be fine-tuned to the process. Acrylic is the entry-level adhesive for many processes, with good transmission, usually paired with an anti-static layer. It targets basic carrier applications and printing processes.
Silicone adhesive is self-wetting: laid on glass it protrudes and automatically settles, whereas acrylic typically needs roll-to-roll pressure lamination. This makes silicone popular for display applications and end-user installations where bubble-free installation is challenging. In non-clean-room conditions, thicker silicone can absorb particles and still guarantee proper adhesion to a display surface.
Urethane is the special case for vacuum bonding, sputtering, and vapor deposition. Silicone adhesive can show oil migration, and in vacuum it outgasses and contaminates the sputtering chamber. Urethane can provide the same structure with self-wetting behavior without that risk of contaminating the bonding or sputtering chamber.
In this short video, you can learn:
* Low-, medium-, and high-stick carrier versions let the adhesive be fine-tuned to the process.
* Silicone self-wets on glass, while acrylic usually requires roll-to-roll pressure lamination.
* Urethane avoids silicone oil migration and vacuum outgassing that can contaminate sputtering chambers.
π **Clip Abstract** Carrier films use three stick levels and acrylic, silicone, or urethane adhesives to match printing, display, and vacuum processes. Acrylic suits basic carrier and printing steps, self-wetting silicone eases bubble-free display installation and particle tolerance, and urethane avoids silicone outgassing in vacuum bonding and sputtering.
About the speaker:
* Speaker: Christoph Bosshard
* Company: Kimoto
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#CarrierFilmAdhesives, #SelfWettingSilicone, #RollToRollLamination, #VacuumOutgassing, #PrintedElectronics, #DisplayManufacturing
09:20 - 10:42
How do UV-deactivation and polyimide carriers survive dicing forces and high-temperature processing?
How do UV-deactivation and polyimide carriers survive dicing forces and high-temperature processing?
For dicing, the protection film is applied with a strong adhesive force before mechanical processing. That adhesion keeps parts from lying around and becoming defects when dicing forces are applied. After processing, UV light deactivates the adhesive layer, so the part can be moved to the next process.
For very high-temperature processes, a different base film is used: polyimide with a specially formulated adhesive. Even after high-temperature influence, the adhesive will not start to degrade, so it can still be removed properly without residue after the temperature process. Typical applications include solar reflow manufacturing, battery applications, electric motors and thin metal foil processing.
These two cases show that the protection film can be tailored to specific application cases. One formulation prioritises strong adhesion for dicing, then UV deactivation for release. The other prioritises polyimide and an adhesive that survives high temperature and remains removable without residue.
In this short video, you can learn:
* Strong dicing adhesion prevents parts from lying around and causing defects under mechanical force.
* UV light deactivates the adhesive layer after processing so the part can move to the next process.
* A polyimide base film with a specially formulated adhesive resists high-temperature degradation and is removed without residue.
π **Clip Abstract** The clip contrasts two carrier-film approaches: a strong-adhesion film for dicing that is released by UV deactivation, and a polyimide-based film for very high-temperature processes. It also lists solar reflow, battery, electric-motor and thin-metal-foil applications where the protection film is tailored to the process.
About the speaker:
* Speaker: Christoph Bosshard
* Company: Kimoto
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#UVDeactivation, #PolyimideCarrier, #DicingAdhesion, #ResidueFreeRemoval, #PrintedElectronics, #FlexibleElectronics
08:04 - 09:23
What flatness and thickness tolerances keep MicroLED mass-transfer parts from being lost?
What flatness and thickness tolerances keep MicroLED mass-transfer parts from being lost?
For MicroLED mass transfer, the carrier film is polyester with a double-sided silicone adhesive. One side is applied to a transparent glass layer, and the transparent film places the microLEDs on the second silicone layer. During placement, the thicker silicone layer absorbs. This construction is presented as a specific material for aligning and keeping very small parts in place.
The critical requirement is flatness. It must sit in very, very tight tolerances so no parts are lost during the process. The goal is that whatever number of parts is placed down, the same number remains at the end. Thickness and thickness tolerance across the whole surface are the critical points.
The process places microLEDs onto the second silicone layer, and flatness and thickness tolerance across the whole surface are framed as critical. The goal is preserving the same number of parts placed down through the end of the process. The next specific application is introduced after this MicroLED mass-transfer example.
In this short video, you can learn:
* The carrier film uses polyester plus a double-sided silicone adhesive, with one side applied to a transparent glass layer.
* The thicker silicone layer absorbs during placement of microLEDs on the second silicone layer.
* Flatness and thickness tolerance across the whole surface are critical to avoid losing parts in the process.
π **Clip Abstract** A polyester carrier film with double-sided silicone adhesive is described for MicroLED mass transfer, with one side on a transparent glass layer and microLEDs placed on the second silicone layer. Flatness and thickness tolerance across the whole surface are critical so the same number of parts placed down remains at the end.
About the speaker:
* Speaker: Christoph Bosshard
* Company: Kimoto
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#PolyesterCarrierFilm, #DoubleSidedSilicone, #MicroLEDMassTransfer, #ThicknessTolerance, #FlexibleElectronics, #DisplayManufacturing
About this talk
β Adhesive carrier and protection films for advanced manufacturing Β· Christoph Bosshard Β· The Future of Electronics RESHAPED 2024 Berlin
Other talks by Christoph Bosshard
- Carrier and protection films for production processes Β· The Future of Electronics RESHAPED 2026 Berlin
- Custom coating of flexible substrates. Coating solutions Β· The Future of Electronics RESHAPED 2025 USA
- Sustainable functional film options Β· Perovskites Innovation Day 2025
- Application of Flexible Light Diffusion Films in User Interfaces Β· Printed, Hybrid, Structural, & 3D Electronics 2021
More highlights from Christoph Bosshard
- βΆ When should a carrier film use acrylic, self-wetting silicone, or urethane adhesive? Β· Electronics RESHAPED 2026 | Berlin
- βΆ What flatness and thickness tolerances keep MicroLED mass-transfer parts from being lost? Β· Electronics RESHAPED 2026 | Berlin
- βΆ How do UV-deactivation and polyimide carriers survive dicing forces and high-temperature processing? Β· Electronics RESHAPED 2026 | Berlin
- βΆ Why does recycled polyester for high-optical carrier films still carry a 50% price premium? Β· Electronics RESHAPED 2026 | Berlin
- βΆ How does Kimoto leverage its core technologies in light management for printed electronics applications? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ What are the key differences in capabilities between Kimoto's wide coating line (Line 2) and compact coating line (LC3) in the US? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ How does the flexibility in coating head selection impact the range of fluids and viscosities that Kimoto can process? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ Can post-consumer plastic bottles match the extreme optical and mechanical tolerances of modern printed electronics substrates? Β· Additive, Sustainable or 3D Electronics Innovations Day 2025
- βΆ Why does wearing polarized sunglasses require a fundamentally different polymer chemistry for automotive displays? Β· Additive, Sustainable or 3D Electronics Innovations Day 2025
- βΆ Can sand replace chemical primers and PFAS coatings to maximize the recyclability of printed electronics? Β· Additive, Sustainable or 3D Electronics Innovations Day 2025


