top of page

Corsin Battaglia

EMPA

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Corsin Battaglia | EMPA: Can a passivating interface extend oxidative stability beyond 4 volts?

15:39 - 17:41

Other snippets from this talk

Summary of the clip:

Can a passivating interface extend oxidative stability beyond 4 volts?

Metal contacts are not stable: they decompose and form an unwanted layer. Oxidative stability sets the battery voltage. In the example shown, stability reaches about 3 volts, after which oxidation currents appear as the material starts to decompose—again an interface effect. The talk then states that the stability window can now be extended beyond 4 volts, enabling integration of 4-volt cathode materials through interface passivation.

An interface perturbation scheme was integrated into this material class. On the first cycle there is initially a high current, analogous to a solid electrolyte interface forming on graphite in a lithium-ion battery. When cycling goes to higher voltage, the current comes down again. With continued cycling the current stays low, indicating that oxidation no longer occurs at some point because a passivating interface has formed.

The passivating interface could also block lithium and sodium ion transport, building internal resistance. Electrochemical impedance spectroscopy shows a resistive contribution, but it is small and, more importantly, stable over time: while cycling, it does not grow thicker. In traditional lithium-ion batteries, carbonate formed a stable interface layer protecting graphite—or the electrolyte—from further decomposition on graphite, a mechanism linked to the success of graphite and cobalt oxide.

In this short video, you can learn:
* Oxidative stability defines the battery voltage, and oxidation currents in the example begin at about 3 volts.
* Interface passivation extends the stability window beyond 4 volts and enables 4-volt cathode materials.
* The passivating interface adds only a small, time-stable resistive contribution and does not thicken during cycling.

📋 **Clip Abstract** Oxidative stability limits voltage, with oxidation currents appearing around 3 volts in the shown example. An integrated interface perturbation scheme forms a passivating interface that suppresses oxidation beyond 4 volts while adding only a small, stable resistive contribution.

About the speaker:
* Speaker: Corsin Battaglia
* Company: EMPA
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#OxidativeStability, #InterfacePassivation, #PassivatingInterface, #ElectrochemicalImpedanceSpectroscopy, #SolidStateBatteries, #BatteryInterfaces

This is a highlight of the presentation:

Interface Stability in Solid-State Batteries

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

04:08 - 06:05

Why can sodium metal be charged 10× faster than lithium metal — is it the electrolyte or the anode itself?

Why can sodium metal be charged 10× faster than lithium metal — is it the electrolyte or the anode itself?

Oxide solid electrolytes are heavily investigated because they are compatible with lithium and sodium metal anodes. The study measured critical current density for dendrite formation, the short-circuit risk between anode and cathode that can lead to thermal runaway and explosion. Replacing graphite with lithium metal could roughly double energy density, making dendrite behavior central to solid-state battery safety and performance.

The comparison used lithium metal in contact with lithium lanthanum carbonate, the prototypical ceramic electrolyte for lithium, and sodium beta-alumina, the prototypical electrolyte for sodium metal. Critical current density was plotted versus temperature. The sodium data points were about a factor of 10 higher than the corresponding lithium points, implying sodium metal batteries can be charged roughly 10× faster than lithium metal anodes.

When plotted against real temperature after normalizing each data set to the melting temperature of lithium and sodium, respectively, the data points fell on top of each other. That collapse is a strong indication that critical current density is not necessarily an electrolyte-specific property, but rather a property beyond the electrolyte. This reframes the sodium-versus-lithium fast-charging difference.

In this short video, you can learn:
* Sodium beta-alumina with sodium metal showed critical current densities about 10× higher than lithium lanthanum carbonate with lithium metal.
* After normalization to the respective melting temperatures, the lithium and sodium data collapsed onto one curve.
* The collapse indicates dendrite-limited critical current density is not necessarily specific to the electrolyte.

📋 **Clip Abstract** Oxide solid electrolytes enable lithium and sodium metal anodes, but dendrite formation limits critical current density and can short cells. Comparing lithium lanthanum carbonate with lithium and sodium beta-alumina with sodium shows sodium critical current densities about 10× higher; normalized data collapse, indicating the limit is not necessarily electrolyte-specific.

About the speaker:
* Speaker: Corsin Battaglia
* Company: EMPA
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#CriticalCurrentDensity, #SodiumBetaAlumina, #LithiumMetalAnodes, #DendriteFormation, #SolidStateBatteries, #BatteryMaterials

07:57 - 10:13

Does rinsing a lithium garnet in ethanol really cause a short circuit after heating to 850 °C?

Does rinsing a lithium garnet in ethanol really cause a short circuit after heating to 850 °C?

Electrochemical impedance spectroscopy exposed a processing trap for lithium garnets: typical lab cleaning with ethanol or isopropanol can drive proton exchange, replacing lithium ions in the garnet with protons. The resulting protonated surface layer has thermal stability much lower than the garnet itself, so the interface is already altered before any high-temperature step.

At the roughly 850 °C treatment used to clean garnet surfaces for contact with lithium metal, that protonated layer decomposes and generates a completely different interface material than intended. In stripping–plating cycling at constant current, the consequence appears as a large overpotential followed by short circuit and dendrite formation. The same failure occurs after heating to 850 °C, linking the wet-cleaning step to cell failure.

The alternative shown is hexane, a solvent with a very different acidity from ethanol. Using hexane prevents protonation and gives very stable stripping–plating cycling. This is presented as another example of how critical it is to control interfaces between two different materials in solid-state battery processing.

In this short video, you can learn:
* Ethanol or isopropanol cleaning can protonate lithium garnet by exchanging lithium ions for protons.
* The protonated layer has lower thermal stability than garnet and decomposes during roughly 850 °C treatment, producing an unintended interface.
* Hexane avoids protonation and enables stable stripping–plating, while ethanol-exposed or 850 °C-heated cells show large overpotential, short circuit and dendrite formation.

📋 **Clip Abstract** Lithium garnet surfaces are sensitive to proton exchange during ethanol or isopropanol cleaning, creating a protonated layer with lower thermal stability than the garnet. At about 850 °C this layer decomposes into an unintended interface, causing large overpotential, short circuit and dendrite formation during stripping–plating; hexane prevents protonation and supports stable cycling.

About the speaker:
* Speaker: Corsin Battaglia
* Company: EMPA
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#LithiumGarnet, #ProtonExchange, #ElectrochemicalImpedanceSpectroscopy, #HexaneSolvent, #SolidStateBatteries, #BatteryInterfaces


About this talk

→ Interface Stability in Solid-State Batteries · Corsin Battaglia · Battery Materials: Next-Gen & Beyond Lithium Ion 2022

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page