top of page

Dan Shea

QD Solar

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Dan Shea | QD Solar: Why keep perovskite and quantum dot sheets separate in a four-terminal design rather than series-connecting them?

04:46 - 06:49

Other snippets from this talk

Summary of the clip:

Why keep perovskite and quantum dot sheets separate in a four-terminal design rather than series-connecting them?

In the pictorial comparison, a conventional 72-cell module is replaced sheet for sheet: the silicon cells come out and two sheets go in — a semi-transparent perovskite on top, a quantum dot sheet beneath, joined in a smart junction box. The perovskite passes everything beyond 800 nanometres through to the layer below. That is a four-terminal design, not a two-terminal stack.

Keeping the sheets electrically separate rather than in series preserves what the quantum dot layer does well. Its refractive-index behaviour, especially when absorbing in the infrared, gives better performance early in the morning and late in the afternoon, in winter months in the Northern Hemisphere, and on cloudy days when sunlight is very diffused. Series connection would give that up.

The drop-in result is a 400-watt, 20% module becoming 490 watts, with a roadmap to 40% efficiency. The route is more perovskite layers, dividing the visible spectrum into more chunks: a second perovskite sheet takes the design from 25% to just above 30%, and a third from 33% toward 40%. Early development cells, a 5-by-5 example, were all spin-coated.

In this short video, you can learn:
* The perovskite sheet transmits everything beyond 800 nanometres, so the quantum dot sheet below still receives infrared to absorb.
* A smart junction box keeps the two sheets electrically separate because series connection would forfeit the quantum dot layer's morning, afternoon, winter and diffuse-light gains.
* Moving from 25% to just above 30% calls for a second perovskite sheet, and a third layer is planned for the 33%-to-40% step.

📋 **Clip Abstract** A semi-transparent perovskite sheet sits above a quantum dot sheet in a four-terminal module, with a smart junction box keeping the two electrically separate rather than in series. That separation preserves the quantum dot layer's infrared and diffuse-light performance, turning a 400-watt, 20% module into 490 watts on a perovskite-layering roadmap toward 40%.

About the speaker:
* Speaker: Dan Shea
* Company: QD Solar
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online

Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/

#FourTerminalTandem, #PerovskiteTopSheet, #QuantumDotSheet, #InfraredHarvesting, #PerovskiteSolarCells, #TandemPhotovoltaics

This is a highlight of the presentation:

Perovskite/Quantum Dot 4 Terminal Tandem Solar Cell

The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid

​

1-2 December 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

07:32 - 08:37

Can drop-in compatibility lift module-maker margins from 9% to 18% while earning 25%?

Can drop-in compatibility lift module-maker margins from 9% to 18% while earning 25%?

For a module maker entering 2022, the baseline is roughly $0.31 per watt price and $0.28 per watt cost, leaving about a 9% margin—described as neither interesting nor sustainable long-term. The proposed drop-in compatibility changes the price side: price can rise to $0.39 per watt, driven by power density and what higher power density commands in pricing.

On cost, cost per watt is around $0.32, not a lot different from today's $0.28. With that cost and the higher $0.39 price, the module maker now has an 18% margin, while the cell supplier has a very comfortable 25% margin. The stated value therefore sits in drop-in compatibility and power-density-based pricing, not in a radically lower module cost.

The market context is massive and growing quickly: by 2050, half the energy produced on the planet is expected to be solar PV, equal to 19 terawatts. The speaker also flags the space-constrained marketplace—residential—as even more important, because that is where higher power density and the drop-in proposition may matter most.

In this short video, you can learn:
* Today's module maker is said to have about $0.31/W price, $0.28/W cost and a 9% margin.
* Drop-in compatibility is claimed to raise price to $0.39/W and module-maker margin to 18%, with about $0.32/W cost and 25% margin for the supplier.
* By 2050, half of planetary energy production is projected to be solar PV at 19 TW, with the space-constrained residential marketplace highlighted as even more important.

📋 **Clip Abstract** The clip frames a drop-in proposition through module-maker economics: $0.31/W price versus $0.28/W cost today gives a 9% margin, while $0.39/W price and about $0.32/W cost are claimed to give 18% for the module maker and 25% for the supplier. It then scales the opportunity to 19 TW of solar PV by 2050, where half of planetary energy production is expected to be solar, and stresses the space-constrained residential marketplace as even more important.

About the speaker:
* Speaker: Dan Shea
* Company: QD Solar
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online

Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/

#DropInCompatibility, #ModuleMakerMargin, #PowerDensityPricing, #SpaceConstrainedResidential, #SolarPV, #Photovoltaics

16:11 - 18:12

Do lead-sulfide quantum dots survive thousands of hours of light and 85/85 testing?

Do lead-sulfide quantum dots survive thousands of hours of light and 85/85 testing?

For glass-encapsulated modules, the lifetime target is standard silicon, and testing follows regular IEC processes: 1,000 hours at 85/85. Stability testing is applied as efficiency is raised stage by stage, so each efficiency stage is checked. This addresses encapsulation and outside influences, with glass providing protection.

A non-glass option using polymer would offer less protection, and the expected lifetime is not certain; currently guessed at 10 to 15 years. It targets installations where glass is not viable and where users are willing to upgrade as efficiency improves: from 24 or 25% now to 40% in 10 years, with flexible, lightweight modules.

Light stability has been strong: thousands of hours of testing showed no degradation so far, especially for the quantum dots. Quantum-dot research began about five years ago, with dots exposed to sunlight and 2-sun simulator light. They have maintained 85% of original power through the end of the test period, better than silicon in that respect. The quantum dot is lead sulfide; the phosphates are lead iodide with halide.

In this short video, you can learn:
* Glass encapsulation is tied to standard-silicon lifetime and regular IEC 85/85 testing over 1,000 hours.
* Polymer encapsulation is expected to last only 10 to 15 years and is aimed at flexible, lightweight installations where glass is not viable.
* Lead-sulfide quantum dots have shown no light degradation over thousands of hours, including sunlight and 2-sun simulator exposure.

📋 **Clip Abstract** The approach uses lead-sulfide quantum dots and lead iodide, with glass-encapsulated lifetime benchmarked to silicon through IEC 1,000-hour 85/85 testing. Light testing over thousands of hours has shown no quantum-dot degradation, maintaining 85% of original power, while polymer encapsulation is guessed at 10 to 15 years for flexible, lightweight installations.

About the speaker:
* Speaker: Dan Shea
* Company: QD Solar
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online

Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/

#LeadSulfideQuantumDots, #IEC8585Testing, #TwoSunSimulator, #PolymerEncapsulation, #PerovskitePhotovoltaics, #QuantumDotSolarCells


About this talk

→ Perovskite/Quantum Dot 4 Terminal Tandem Solar Cell · Dan Shea · The Future of Photovoltaics: Organic, Perovskites, CIGS, Hybrid 2021

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page