Daniela Werlich | Customcells: Why does LFP’s ~150 mAh/g versus NCM 811’s ~200 mAh/g force a capacity-versus-energy compromise?
14:58 - 17:14
Other snippets from this talk
Summary of the clip:
Why does LFP’s ~150 mAh/g versus NCM 811’s ~200 mAh/g force a capacity-versus-energy compromise?
LFP delivers around 150 milliampere-hours per gram, while NCM 811 or beyond reaches around 200 milliampere-hours per gram or more—about one-third more specific capacity. Because capacity is lithium per gram of material, the higher-capacity NCM requires less material for the same capacity. LFP’s lower energy density is therefore not merely a chemistry footnote; it changes how much material an application must carry.
NCM development began with 111: 33% nickel, 33% manganese and 33% cobalt. Over time, cobalt is reduced and nickel increased, because lithium nickel oxide’s theoretical capacity is very high but must be diluted with other metals to make it more stable. High-nickel lattices therefore use small amounts of other materials to stabilize the structure while pursuing capacity.
Material choice follows application requirements: if very high cycle stability is needed, LFP may be chosen at the cost of lower energy density. Voltage range also matters. Capacity alone is not the target; energy is capacity multiplied by voltage. The compromise is therefore set by both the specific capacity of the cathode and the voltage range in which it is used.
In this short video, you can learn:
* LFP offers lower cost without nickel or cobalt and high safety/stability, but its ~150 mAh/g specific capacity is lower than NCM 811’s ~200 mAh/g or more.
* NCM has moved from 111 toward higher nickel and lower cobalt, using small amounts of other metals to stabilize a high-capacity lithium nickel oxide lattice.
* The relevant metric is energy—capacity times voltage—so applications needing high cycle stability may choose LFP despite lower energy density.
📋 **Clip Abstract** LFP’s ~150 mAh/g specific capacity versus NCM 811’s ~200 mAh/g or more means about one-third more capacity for NCM, requiring less material for the same capacity. The trade-off is application-dependent: LFP can be selected for very high cycle stability at lower energy density, while energy itself is capacity multiplied by voltage, making voltage range part of the comparison.
About the speaker:
* Speaker: Daniela Werlich
* Company: Customcells
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#LFP, #NCM811, #SpecificCapacity, #LithiumNickelOxide, #LithiumIonBatteries, #CathodeMaterials
This is a highlight of the presentation:
Cathode Materials For Lithium Ion Batteries – Target actual Comparison: Limitations & Opportunities
More Highlights from the same talk.
10:56 - 13:17
Which material trends dominate high-energy lithium-ion cells, and what production penalties do thin substrates and thick electrodes impose?
Which material trends dominate high-energy lithium-ion cells, and what production penalties do thin substrates and thick electrodes impose?
High-nickel cathodes are singled out for higher energy density, but they are less stable toward water and humidity. On the anode side, silicon draws interest for high specific capacity, though cycle stability is lower and special electrolytes are required. Large-capacity pouch cells are the focus because they are more flexible in development and reduce inactive material, easing high energy density.
Ultrathin substrates and separators are being pursued to raise energy density, but thinner materials make production more challenging. Calendaring, coating and slitting become more failure-prone as substrates get thinner. Separators must not get so thin that they lose their safety function of dividing anode from cathode.
Ultra-thick electrode loadings are another route to higher energy density, with the trade-off of lower power density and possible fast-charging limitations for short durations. That makes electrode structuring more interesting. All-solid-state is also a focus where no liquid electrolyte is used but a solid electrolyte.
In this short video, you can learn:
* High-nickel cathodes raise energy density but are less stable to water and humidity.
* Silicon anodes offer high specific capacity, yet need special electrolytes and show lower cycle stability.
* Thinner substrates and separators plus ultra-thick electrodes raise energy density but complicate production, safety, power density and fast charging.
📋 **Clip Abstract** The clip compares high-energy lithium-ion material trends against production limits: high-nickel cathodes, silicon anodes, large pouch cells, ultrathin substrates and separators, and ultra-thick electrodes. It shows that energy-density gains trade against humidity stability, cycle life, separator safety, coating, calendaring and slitting failures, lower power density and fast-charging constraints, while all-solid-state is another focus.
About the speaker:
* Speaker: Daniela Werlich
* Company: Customcells
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#HighNickelCathodes, #SiliconAnodes, #UltrathinSeparators, #UltraThickElectrodes, #LithiumIonBatteries, #SolidStateBatteries
21:09 - 23:10
Why do high-hysteresis cathodes waste energy as heat, and why is sodium cobalt oxide's curve so steppy?
Why do high-hysteresis cathodes waste energy as heat, and why is sodium cobalt oxide's curve so steppy?
Hysteresis, or round-trip efficiency, means the charge voltage is always higher than the discharge voltage. Capacity can stay the same: 5 ampere-hours in can yield 5 ampere-hours back, but charging energy exceeds discharging energy. The gap between the two curves is mainly lost energy, and most of it becomes heat. A material with broad or high hysteresis therefore creates thermal energy that larger systems must cool or remove.
New materials often show very high hysteresis and high energy generation. Sodium-ion is a recent, interesting field because it is cheaper. Comparing lithium cobalt oxide, LCO, a starting material for lithium-ion batteries, with sodium cobalt oxide exposes the difference: LCO gives a nice, slopey energy curve, while sodium cobalt oxide is very steppy. That step behaviour matters when building large charge and discharge systems.
For large systems, high-hysteresis materials mean thermal energy must be cooled or got out of the system somehow. Sodium cobalt oxide's very steppy charge and discharge curve is the concrete example. Its lower-cost sodium-ion context makes it interesting, but the material still brings high hysteresis and high energy generation. That combination makes heat management and voltage-curve behaviour central when scaling cells.
In this short video, you can learn:
* Charge voltage exceeds discharge voltage, so even with equal capacity the energy lost is mainly heat.
* Sodium cobalt oxide shows a very steppy curve versus LCO's slopey curve.
* High-hysteresis materials require cooling or heat removal in larger systems.
📋 **Clip Abstract** The clip explains hysteresis as the energy gap between higher charge voltage and lower discharge voltage, with equal capacity but heat loss. It compares LCO's slopey curve with sodium cobalt oxide's steppy curve and flags thermal management for high-hysteresis materials in large systems.
About the speaker:
* Speaker: Daniela Werlich
* Company: Customcells
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#RoundTripEfficiency, #SodiumCobaltOxide, #LithiumCobaltOxide, #HysteresisHeat, #BatteryMaterials, #SodiumIonBatteries
17:30 - 19:11
Why do high-voltage spinel cathodes decompose standard electrolytes, and what fixes are required?
Why do high-voltage spinel cathodes decompose standard electrolytes, and what fixes are required?
Cell potential is the difference between anode and cathode potentials. Graphite with LFP gives about 3.2 V per cell, while LTO with LFP gives only around 2 V. To gain high energy density, the transcript argues for pairing a higher-potential cathode with a low-potential anode to achieve the highest voltage. Spinel materials are described as high-voltage materials that go even higher.
The background colour marks the stability window of a classical lithium-ion electrolyte, stabilised at the bottom by the SEI. At the top, high-voltage materials enter a region where the electrolyte is no longer stable. It starts to decompose, leading to lower cycle life or even gas formation. Therefore, specific electrolytes might be required for these high-voltage materials.
The implication is that cathode selection cannot be separated from electrolyte stability. A high-potential spinel can raise cell voltage, but if the electrolyte’s upper stability limit is exceeded, decomposition limits cycle life and can generate gas. The transcript frames specific electrolyte formulations as a possible requirement, rather than treating the high-voltage cathode alone as sufficient.
In this short video, you can learn:
* Graphite paired with LFP gives about 3.2 V per cell, whereas LTO with LFP gives only around 2 V.
* Classical lithium-ion electrolyte stability is bounded at the bottom by the SEI and at the top by a region where high-voltage materials cause decomposition.
* High-voltage spinel cathodes may need specific electrolytes because decomposition can reduce cycle life or form gas.
📋 **Clip Abstract** Cell voltage is set by the anode–cathode potential difference: graphite/LFP is about 3.2 V per cell, while LTO/LFP is around 2 V, motivating high-potential cathodes with low-potential anodes. High-voltage spinels exceed the upper stability window of classical lithium-ion electrolytes, so decomposition can lower cycle life or form gas, making specific electrolytes a potential requirement.
About the speaker:
* Speaker: Daniela Werlich
* Company: Customcells
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#HighVoltageSpinel, #ElectrolyteStabilityWindow, #SEIStabilization, #GasFormation, #LithiumIonBatteries, #BatteryMaterials
About this talk
→ Cathode Materials For Lithium Ion Batteries – Target actual Comparison: Limitations & Opportunities · Daniela Werlich · Battery Materials: Next-Gen & Beyond Lithium Ion 2022
Other talks by Daniela Werlich
- Advanced and beyond Li ion batteries* · Solid-State Batteries: Innovations, Promising Start-Ups, & Future Roadmap 2024


