David Forgács | Saule Technologies: How does a 40,000 square metre pilot line translate into megawatt-peak output, and what comes next?
02:00 - 04:29
Other snippets from this talk
Summary of the clip:
How does a 40,000 square metre pilot line translate into megawatt-peak output, and what comes next?
The pilot production line opened in May 2021, housed in a factory area of around 5,000 square metres, and it is the platform for upscaling perovskite modules. Its nominal capacity is 40,000 square metres printed per year. Converted to power at roughly 10% one-sun efficiency, that corresponds to about 4 megawatt-peak, small in absolute terms but sufficient to target first applications.
Through 2021 the focus moved to first demonstrators and first applications built with different clients, mainly in the Internet of Things, which is described as the low-hanging fruit for perovskite. Work with partners covers product development and implementation into applications, while other potential markets are addressed in parallel; perovskite is seen as having a very large potential market beyond that entry point.
The stated scaling path is to improve throughput, efficiency and stability while reducing losses in the production line, then to upscale to what is called a full capacity production line, targeted at about 700,000 square metres per year. IoT remains the entry market, but activity is pointed toward utility-scale applications, which are judged feasible in the coming years.
In this short video, you can learn:
* The May 2021 pilot line delivers 40,000 square metres per year of nominal printed area, equal to roughly 4 megawatt-peak at 10% one-sun efficiency.
* Roadmap priorities are higher throughput, efficiency and stability, plus reduced losses inside the production line.
* IoT is the first commercial market, while the full capacity line is targeted at about 700,000 square metres per year and utility-scale is expected in the coming years.
📋 **Clip Abstract** A pilot production line opened in May 2021 inside a 5,000 square metre factory, with 40,000 square metres per year of nominal capacity equating to roughly 4 megawatt-peak at 10% one-sun efficiency. The roadmap pairs first IoT demonstrators with throughput, efficiency and stability gains toward a full capacity line of about 700,000 square metres per year.
About the speaker:
* Speaker: David Forgács
* Company: Saule Technologies
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#PilotProductionLine, #PerovskitePrinting, #MegawattPeakOutput, #IoTPhotovoltaics, #PerovskiteSolarCells, #SolutionProcessedPV
This is a highlight of the presentation:
The Development of the First Commercial Applications of Perovskite Solar Cells
More Highlights from the same talk.
09:55 - 11:38
Can perovskite solar cells be viable indoors despite shorter lifetimes than crystalline silicon, and what outdoor data supports that confidence?
Can perovskite solar cells be viable indoors despite shorter lifetimes than crystalline silicon, and what outdoor data supports that confidence?
The clip frames indoor operation as a very different use case for perovskite photovoltaics. Indoors, modules are not exposed to the high temperatures, ultraviolet radiation, moisture and higher illumination that can contribute to degradation outdoors. Because of that reduced stress, even a relatively shorter lifetime compared with established crystalline silicon can still support a viable product for indoor applications.
To support stability work, one module is being kept in outdoor conditions on a roof. Its normalized efficiency is averaged over the day, and the performance trace is not a very straightforward straight line. The module has been outside for almost 1 year with no high amount of reduction in the power it can deliver.
The speaker argues that if this module can survive these outdoor conditions in Poland, indoor applications can be viewed with fair confidence that multiple years of lifetime can be guaranteed. That lifetime is already enough for many IoT applications, making indoor perovskite modules a practical target despite their shorter lifetime than established crystalline silicon.
In this short video, you can learn:
* Indoor perovskite operation avoids high temperature, ultraviolet radiation, moisture and higher illumination stress that contribute to outdoor degradation.
* A rooftop module outdoors in Poland for almost 1 year showed no high amount of reduction in deliverable power, with daily-averaged normalized efficiency.
* If that module survives Polish outdoor conditions, indoor modules can be fairly confident of multiple years of lifetime, enough for many IoT applications.
📋 **Clip Abstract** Indoor perovskite solar cells face a different stress profile from outdoor modules: no high temperatures, ultraviolet radiation, moisture or higher illumination that drive degradation. A rooftop module kept outdoors in Poland for almost 1 year showed no high reduction in power, supporting confidence that indoor applications can guarantee multiple years of lifetime for many IoT uses.
About the speaker:
* Speaker: David Forgács
* Company: Saule Technologies
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#PerovskiteIndoorCells, #RooftopModuleTesting, #NormalizedEfficiency, #IoTIndoorPower, #PerovskitePhotovoltaics, #SolarCellStability
24:42 - 27:11
Do perovskites or OPVs win on indoor efficiency, device cost and synthesis complexity?
Do perovskites or OPVs win on indoor efficiency, device cost and synthesis complexity?
Under indoor low-light conditions the two absorber families land in the same range: record research cells for both organic photovoltaics and perovskites sit at roughly 35 to 36 percent power conversion efficiency, and the speaker calls the power budget fairly comparable. He cautions that any efficiency figure has to be weighted against the power density actually delivered by the light source in use, so headline numbers alone do not settle the comparison.
On cost, encapsulation dominates the bill of materials and the encapsulation materials are broadly similar for both families. Where the perovskite device itself is concerned, the speaker says it is already cheaper than OPV today; the advantage traces to the complex organic synthesis that organic photovoltaic materials demand, and to the decent-sized chemical facilities needed to scale that synthesis up.
Perovskite precursor chemistry is comparatively trivial: salts combined in a solvent give the photoactive material, which the speaker argues will make perovskites eventually superior on cost. The counterweight is lead, which OPV does not contain, and he expects some companies to rule the material out on that basis alone. Both, he adds, address a broad IoT market.
Record research cells for OPV and perovskite both reach roughly 35–36% under indoor low-light, so the two are fairly comparable on power conversion efficiency.
Encapsulation is typically the most expensive element and the materials used for it are similar, yet the perovskite device itself is already cheaper than OPV because organic materials require complex synthesis and substantial chemical facilities to upscale.
OPV's absence of lead is a genuine advantage for applications and for companies that refuse lead-containing materials outright.
In this short video, you can learn:
* Record research cells for OPV and perovskite both reach roughly 35–36% under indoor low-light, so the two are fairly comparable on power conversion efficiency.
* Encapsulation is typically the most expensive element and the materials used for it are similar, yet the perovskite device itself is already cheaper than OPV because organic materials require complex synthesis and substantial chemical facilities to upscale.
* OPV's absence of lead is a genuine advantage for applications and for companies that refuse lead-containing materials outright.
📋 **Clip Abstract** Perovskite and organic photovoltaics are near-matched on indoor low-light efficiency, at roughly 35–36% in record research cells, with the real comparison hinging on the spectrum and power density of the light source. Perovskite wins on device-material cost because it swaps complex organic synthesis and large chemical facilities for salts dissolved in solvent, while OPV retains a lead-free advantage for lead-averse customers.
About the speaker:
* Speaker: David Forgács
* Company: Saule Technologies
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#IndoorLowLight, #OrganicSynthesisCost, #PerovskitePrecursors, #LeadFreeOPV, #PerovskitePhotovoltaics, #OrganicPhotovoltaics
14:06 - 16:00
Why do electronic shelf labels represent a high-value initial commercial application for perovskite PVs?
Why do electronic shelf labels represent a high-value initial commercial application for perovskite PVs?
Electronic shelf labels already have a large installed base: the three largest players have installed over 500 million devices, and the market is growing at over 25% annually. A single device with one form factor can target a very large number of applications, which makes this market attractive for perovskite solar integration.
Commercial devices typically offer around two price updates per day combined with approximately five years of lifetime. Integrating perovskite solar modules brings additional benefits because the devices have a much higher power budget. That higher power budget can increase the number of updates and the functionality the device can offer, which is where dynamic pricing as a value proposition comes in.
Dynamic pricing is presented as a value proposition for physical stores facing online competition, especially with COVID making online stores more attractive. Physical stores find it hard to compete with Amazon on dynamic pricing, but the solution re-enables them through collaboration with Google, using machine learning to offer a better return for physical stores using the solutions.
In this short video, you can learn:
* The three largest electronic shelf label players have installed over 500 million devices, with the market growing at over 25% annually.
* Commercial devices typically provide around two price updates per day and approximately five years of lifetime.
* Perovskite solar modules provide a much higher power budget, enabling more updates and functionality such as dynamic pricing with machine learning via Google.
📋 **Clip Abstract** Electronic shelf labels are a large, fast-growing market where a single form factor can address many applications. Perovskite solar modules raise the power budget for more frequent price updates and functionality, supporting dynamic pricing that helps physical stores compete through a Google machine-learning collaboration.
About the speaker:
* Speaker: David Forgács
* Company: Saule Technologies
* Event: The Future of Photovoltaics 2021: Organic, Perovskites, CIGS, Hybrid
* Location: online
Join TechBlick - To learn more about emerging photovoltaic technologies incluing perovskites and organic photovoltaics
https://www.techblick.com/
#ElectronicShelfLabels, #PerovskiteSolarModules, #DynamicPricing, #MachineLearning, #PerovskitePhotovoltaics, #SolarCells
About this talk
→ The Development of the First Commercial Applications of Perovskite Solar Cells · David Forgács · The Future of Photovoltaics: Organic, Perovskites, CIGS, Hybrid 2021


