Dávid Forgács | Saule Technologies: What efficiency has Saule reached on printed single cells, modules, and indoor harvesting?
22:38 - 24:25
Other snippets from this talk
Summary of the clip:
What efficiency has Saule reached on printed single cells, modules, and indoor harvesting?
On cell level, the current record is over 17% for a printed single cell on 1 centimeter square. At module level, efficiency is now around 9%, with a target of 10% this year as a manufacturing standard. These figures describe outdoor performance, separating small printed-cell records from module-level manufacturing metrics.
Indoor performance differs because absorption occurs at a different wavelength. Record devices are around 20% efficiency, converting to roughly 60–70 microwatts per centimeter squared at 1,000 lux. At 200 lux, output is closely 10 microwatts per centimeter squared. Lower light gives somewhat lower output, linking indoor efficiency to irradiance level rather than one fixed number.
Degradation is present for both OPV and perovskite, and the team is working on passing the 85/85 test, a target for this year. For indoor applications, the immediate priority is establishing market presence. For IoT, the speaker is more than confident that first indoor applications have the stability, performance, and cost required.
In this short video, you can learn:
* Printed single cells reach over 17% efficiency on 1 centimeter square, while modules are around 9% with a 10% manufacturing target.
* Indoor record devices reach around 20% efficiency, yielding roughly 60–70 microwatts per centimeter squared at 1,000 lux and close to 10 microwatts per centimeter squared at 200 lux.
* Degradation affects OPV and perovskite, with 85/85 testing targeted this year; indoor IoT applications are claimed to already meet stability, performance, and cost needs.
📋 **Clip Abstract** Saule reports over 17% for a printed 1 centimeter square single cell and around 9% at module level, targeting 10% as a manufacturing standard this year. Indoor record devices reach around 20% efficiency, delivering roughly 60–70 microwatts per centimeter squared at 1,000 lux and close to 10 microwatts per centimeter squared at 200 lux, while 85/85 testing remains a target.
About the speaker:
* Speaker: Dávid Forgács
* Company: Saule Technologies
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#PrintedPerovskite, #SingleCellEfficiency, #ModuleEfficiency, #IndoorPhotovoltaics, #PerovskiteSolarCells, #FlexibleElectronics
This is a highlight of the presentation:
First Commercial Applications of Flexible Printed Perovskite Solar Modules
More Highlights from the same talk.
06:36 - 08:38
How much power do flexible printed perovskite cells deliver indoors, from 200 to 1,000 lux?
How much power do flexible printed perovskite cells deliver indoors, from 200 to 1,000 lux?
Under indoor white LED or fluorescent light, the modules convert harvested light into usable electricity. Current measured output is 60 microwatts per square centimetre at 1,000 lux and 10 microwatts per square centimetre at 200 lux, showing operation in low light. The team expects over 100 microwatts per square centimetre at 1,000 lux within a couple of years.
For IoT devices, that harvested power can support new functionalities without depending solely on battery replacement. The first product is an electronic shelf label integrating the perovskite PV module. In retail, it enables dynamic pricing and removes manual price updates. Continuous indoor harvesting gives a steadier supply than a battery alone, allowing longer device lifetime or more frequent price updates.
The shelf-label integration also retains standard label features while improving environmental profile. By harvesting readily available store light, the PV module reduces battery waste and supports more eco-friendly operation. The approach targets retail IoT where paper labels are replaced by electronic labels, and the harvested energy offsets battery constraints. This makes the combination relevant for devices needing frequent updates without running out of power.
In this short video, you can learn:
* At 1,000 lux the current flexible printed perovskite module outputs 60 microwatts per square centimetre, falling to 10 microwatts per square centimetre at 200 lux.
* The developers expect to exceed 100 microwatts per square centimetre at 1,000 lux within a couple of years.
* An electronic shelf label integrating the PV module can use indoor light harvesting to extend lifetime or increase price-update frequency and cut battery waste.
📋 **Clip Abstract** Flexible printed perovskite solar modules harvest white LED and fluorescent indoor light, delivering 60 microwatts per square centimetre at 1,000 lux and 10 microwatts per square centimetre at 200 lux. The first commercial target is an electronic shelf label whose integrated PV module supports dynamic pricing, longer lifetime or more frequent updates, and reduced battery waste.
About the speaker:
* Speaker: Dávid Forgács
* Company: Saule Technologies
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#PerovskitePV, #IndoorLightHarvesting, #ElectronicShelfLabel, #MicrowattsPerCm2, #FlexiblePrintedElectronics, #IoTEnergyHarvesting
25:07 - 26:46
How can printed perovskite solar modules satisfy RoHS lead regulations and prevent environmental contamination?
How can printed perovskite solar modules satisfy RoHS lead regulations and prevent environmental contamination?
Legislative issues come down to material limitations, typically RoHS. First results from an external laboratory show lead content below the limits set by RoHS because the film is very thin and uses a very low amount of material. Full RoHS certification is being worked on now and will probably arrive in the near future; PV modules are in many cases excluded from RoHS.
Environmental protection requires a very robust encapsulation that keeps all material inside. Different techniques are being explored. One is an in-house encapsulation approach, described as already very robust. Another uses materials that can trap the lead inside the device, so even if the casing is somehow destroyed and material would leak, the lead still stays inside the device in trap form.
These two routes address legislative and environmental concerns in parallel: thin-film low material usage supports RoHS lead-content limits, while encapsulation and lead-trapping materials target containment. External laboratory results provide the first lead-content data; full RoHS certification remains in progress. PV-module exclusions are noted as helpful, but the presentation states that robust encapsulation is still needed to keep material inside.
In this short video, you can learn:
* An external laboratory found lead content below RoHS limits because the perovskite film is very thin and uses very low material amounts.
* Full RoHS certification is in progress, and PV modules are often excluded from RoHS.
* Environmental protection relies on robust encapsulation plus lead-trapping materials that keep lead inside the device if the casing is destroyed.
📋 **Clip Abstract** External laboratory results show that the printed perovskite solar module's lead content is below RoHS limits, attributed to the very thin film and very low material usage, while full RoHS certification is being pursued. For environmental protection, the approach combines robust encapsulation with lead-trapping materials so material stays inside the device even if the casing is destroyed.
About the speaker:
* Speaker: Dávid Forgács
* Company: Saule Technologies
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#RoHSLeadContent, #ExternalLabResults, #RobustEncapsulation, #LeadTrappingMaterials, #PerovskitePhotovoltaics, #PrintedElectronics
18:38 - 20:45
How do intrinsic material stability and device encapsulation set commercial lifetimes for indoor and outdoor perovskite modules?
How do intrinsic material stability and device encapsulation set commercial lifetimes for indoor and outdoor perovskite modules?
Perovskite stability splits into two problems. Intrinsic, or internal, stability is tied to the material and its interfaces; external stability is about sealing the device from the environment. For the internal side, the approach deliberately uses materials that prevent internal chemical reactions between layers. The presenter notes the literature long chased record efficiencies, while these devices do not reach published record performance — but the material set is chosen so the device stays internally stable.
On the external side, the company developed its own encapsulation methods, and the application environment matters a lot. For indoor deployment — IoT, for example — the claim is confidence in providing more than five years of lifetime already, which allows the first markets to be addressed and commercial presence established. That indoor window is presented as sufficient to start selling rather than waiting for outdoor-qualified durability.
For building-integrated photovoltaics the timeline stretches. Product rollouts are targeted longer term, with a Skanska launch anticipated in 2022 — and that is exactly the timing at which the team expects outdoor environments to reach at least ten to fifteen years. That figure is framed as the requirement for people working in vehicle-integrated photovoltaics, where the outdoor lifetime demand is stated rather than assumed.
In this short video, you can learn:
* Perovskite durability is treated as two separate problems: intrinsic stability of the material and its interfaces, and external stability handled through encapsulation.
* The material set trades record efficiency for suppression of internal chemical reactions between layers, keeping devices internally stable.
* Indoor IoT modules are quoted above five years lifetime, while outdoor building- and vehicle-integrated targets reach at least ten to fifteen years, aligned with a 2022 launch.
📋 **Clip Abstract** Two degradation routes are separated here: intrinsic material and interface chemistry, and external sealing against the environment. The answer is stability-first material selection plus in-house encapsulation, giving over five years indoors for IoT and a ten-to-fifteen-year outdoor target timed to a 2022 rollout.
About the speaker:
* Speaker: Dávid Forgács
* Company: Saule Technologies
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#PerovskiteEncapsulation, #IntrinsicStability, #IndoorIoT, #BIPV, #PrintedPhotovoltaics, #FlexibleElectronics
About this talk
→ First Commercial Applications of Flexible Printed Perovskite Solar Modules · Dávid Forgács · Printed, Flexible, Hybrid, & InMold Electronics 2021


