David Nilsson | DP Patterning: How does a patterned drum and milling tool mechanically remove metal to form conductive patterns in flexible laminate?
03:29 - 04:55
Other snippets from this talk
Summary of the clip:
How does a patterned drum and milling tool mechanically remove metal to form conductive patterns in flexible laminate?
The production line is a roll-to-roll platform with high capacity, running at 20 meters per minute. Product changeover is quick, moving from one product to another in less than an hour. The system and process are built in-house, and the process is patented.
It is a mechanical process that starts with a laminate: a carrier, an adhesive layer and a conductive layer laminated together. A drum with a pattern pushes the pattern up in the flexible foil. A milling tool then removes part of the metal, resulting in a conductive pattern.
Residues from milling are aluminum powder. They can be vacuum cleaned up and saved, collected in plastic bags, and handed into recycling companies. That is more or less how the process goes on, producing the conductive pattern from the laminated flexible material.
In this short video, you can learn:
* The roll-to-roll process runs at 20 meters per minute with product changeover in under an hour.
* A patterned drum pushes the pattern into flexible foil before a milling tool removes metal.
* Milling residues are aluminum powder that can be vacuum cleaned, bagged and sent to recycling companies.
📋 **Clip Abstract** A mechanical roll-to-roll process uses a patterned drum and milling tool to remove metal from a flexible laminate and leave a conductive pattern. It runs at 20 meters per minute, changes products in under an hour, and collects aluminum powder residues for recycling.
About the speaker:
* Speaker: David Nilsson
* Company: DP Patterning
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#RollToRollProduction, #PatternedDrumMilling, #AluminumPowderRecovery, #ConductivePatterning, #FlexibleElectronics, #PrintedElectronics
This is a highlight of the presentation:
Eliminating Wet Processing: Dry Phase Patterning of Flexible Electronic Circuits
More Highlights from the same talk.
10:05 - 11:43
How does dry phase patterning compare with chemical etching, lasering, and silver printing on sustainability and cost?
How does dry phase patterning compare with chemical etching, lasering, and silver printing on sustainability and cost?
Fraunhofer performed an LCA analysis comparing chemical etching with dry phase patterning. One square meter of chemical etching leaves substantial iron chloride and filter cake that is hard to recycle. Dry phase patterning instead produces a powder that can be handed to recycling companies. The LCA showed up to 98% CO2 footprint savings.
Compared with chemical etching, dry phase patterning offers high sustainability and a powder waste stream. Dry phase patterning also has high cost efficiency due to large volume production capability. Chemical etching's cost efficiency depends on where production occurs, but its sustainability is very low. Lasering and silver printing are described as having low cost efficiency, especially silver printing because of today's high silver prices.
The comparison positions dry phase patterning as having high sustainability and high cost efficiency. Chemical etching can be cost-efficient or less cost-efficient depending on production location, yet its sustainability is very low. Silver printing suffers from low cost efficiency, particularly under current high silver prices. Lasering also has low cost efficiency. The result is a strong case against these alternatives.
In this short video, you can learn:
* Fraunhofer's LCA found up to 98% CO2 footprint savings from chemical etching to dry phase patterning.
* Dry phase patterning yields a powder that can go to recycling companies, while chemical etching leaves iron chloride and filter cake that is hard to recycle.
* Silver printing and lasering have low cost efficiency, while chemical etching's cost efficiency varies by production location and its sustainability is low.
📋 **Clip Abstract** Fraunhofer's LCA analysis compared chemical etching with dry phase patterning, finding up to 98% CO2 footprint savings. Dry phase patterning also produces a recyclable powder and offers high cost efficiency through large volume production, while chemical etching, lasering and silver printing face low sustainability or cost-efficiency trade-offs.
About the speaker:
* Speaker: David Nilsson
* Company: DP Patterning
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#DryPhasePatterning, #ChemicalEtching, #SilverPrinting, #CO2FootprintReduction, #SustainableElectronics, #PrintedElectronics
Other talks by David Nilsson
- How to get started with hybrid printed electronics · Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025


