Dr. Bin Fan | Kunshan GCL Optoelectronic Material Co.,Ltd: Why can four-terminal tandems use 1.6 eV perovskites while two-terminal designs need higher bandgaps?
04:24 - 05:50
Other snippets from this talk
Summary of the clip:
Why can four-terminal tandems use 1.6 eV perovskites while two-terminal designs need higher bandgaps?
The theoretical efficiency limits of four-terminal and two-terminal tandems were compared across perovskite top-cell bandgaps. Both architectures reach a maximum at about 1.73 eV, and both drop off as the bandgap moves away from that optimum. The two-terminal design drops much faster, however, because of mismatch losses. That steeper penalty narrows the practical bandgap window for two-terminal tandems.
Because four-terminal devices avoid that rapid drop-off, they can use slightly lower-bandgap perovskites than two-terminal designs. The presentation states a focus on something like 1.6 eV. At this bandgap, more stable single-halide perovskites are available, and processing can reach higher temperatures. This contrasts with the higher-bandgap route, where multiple halide perovskites are required.
For higher-bandgap perovskites, multiple halide perovskites are needed, and phase segregation becomes a problem under temperature and light exposure. The four-terminal strategy therefore allows a focus on lower-bandgap absorbers while retaining the wider usable bandgap range described by the efficiency curves. The stated target is around 1.6 eV, versus the 1.73 eV theoretical optimum.
In this short video, you can learn:
* Both four-terminal and two-terminal tandems peak at about 1.73 eV in theoretical efficiency.
* Two-terminal tandems lose efficiency faster away from the optimum because of mismatch losses.
* A 1.6 eV target enables more stable single-halide perovskites and higher processing temperatures, while higher bandgaps face phase segregation.
📋 **Clip Abstract** The clip compares theoretical efficiency limits for four-terminal and two-terminal perovskite tandems across top-cell bandgaps. It explains why four-terminal designs can target 1.6 eV single-halide perovskites, while two-terminal designs must emphasize higher bandgaps where phase segregation is a concern.
About the speaker:
* Speaker: Dr. Bin Fan
* Companies: Kunshan GCL Optoelectronic Material Co.,Ltd
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FourTerminalTandem, #SingleHalidePerovskite, #PhaseSegregation, #MismatchLoss, #PerovskiteTandem, #Photovoltaics
This is a highlight of the presentation:
Four Terminal Tandem Strategy for Perovskite
21 and 22 OCT 2026
Estrel, Berlin
Organised By:
More Highlights from the same talk.
02:55 - 04:29
Why choose a four-terminal tandem instead of a series-connected two-terminal design?
Why choose a four-terminal tandem instead of a series-connected two-terminal design?
The four-terminal route is framed as easier to commercialize because the perovskite is deposited on flat glass rather than textured silicon. Glass can be made as large as needed, and one entire module can be coated in one go instead of handling separate wafers. It also avoids being tied to a specific silicon cell specification such as TopCon, HAT or BC.
Electrically, the four-terminal setup places perovskite and silicon in two separate circuits, so they operate independently as environmental conditions change. In a two-terminal design the cells are connected in series, so the electrical current must be the same. Weather, irradiation, spectrum shifts, differential degradation, backside ground reflection or front-side soiling can then create current imbalance.
The consequence is current limiting: in the series-connected two-terminal case, the lower-current cell limits the higher-current cell. The four-terminal arrangement avoids that constraint by keeping the circuits separate. The talk also points to a material and theoretical perspective, but the clip ends before that argument is developed.
In this short video, you can learn:
* Flat glass allows one entire module to be coated in one go and avoids textured silicon and separate wafers.
* A four-terminal tandem keeps perovskite and silicon in two separate circuits, allowing independent operation under changing environment.
* In a two-terminal series connection, the lower-current cell limits the higher-current cell when weather, spectrum, degradation, backside reflection or soiling cause imbalance.
📋 **Clip Abstract** This clip explains why a four-terminal tandem is presented as easier to commercialize: flat glass enables large-area, one-go module coating and avoids dependence on a specific silicon cell specification such as TopCon, HAT or BC. It then contrasts the separate circuits of the four-terminal layout with the series-connected two-terminal design, where current must match and the lower-current cell can limit the higher-current cell under environmental or degradation imbalance.
About the speaker:
* Speaker: Dr. Bin Fan
* Companies: Kunshan GCL Optoelectronic Material Co.,Ltd
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FourTerminalTandem, #CurrentMismatch, #FlatGlassCoating, #PerovskiteSilicon, #PerovskitePhotovoltaics, #TandemSolarCells
11:36 - 13:33
When will perovskite tandems reach cost parity, and what field data supports their lifetime?
When will perovskite tandems reach cost parity, and what field data supports their lifetime?
The cost projection is an internal estimate based on production volume. A 500 MW line exists but is not running at full capacity, and annual shipment volume is limited. Cost falls by utilizing the line and by supply-chain development lowering raw-material costs. As volume gradually moves toward 3 GW, the estimate approaches today’s market cost for TOPCon or BC modules.
Reliability evidence includes IEC 61215 on the single-junction module, claimed as the first, plus three-time IEC testing early last year. The tandem module reached IEC certification on the smaller two-meter-square size. For the larger tandem module now in production, the certificate is expected within the next month.
A small system on the factory roof, monitored for roughly one year, compares perovskite single-junction modules with crystalline modules. Specific yield shows a consistent perovskite advantage; the dotted ratio indicates 10 to 20% advantage. No noticeable degradation is shown in this case over one and a half years.
In this short video, you can learn:
* The cost estimate reaches close to TOPCon or BC module cost only as volume gradually moves toward 3 GW.
* IEC 61215 was first achieved on the single-junction module, and the smaller two-meter-square tandem module is certified.
* Factory-roof specific-yield data show a consistent 10–20% perovskite advantage with no noticeable degradation over one and a half years.
📋 **Clip Abstract** An internal cost estimate links volume growth from a partially utilized 500 MW line toward 3 GW with approaching TOPCon or BC module costs. Reliability data cover IEC 61215 single-junction certification, three-time IEC testing, smaller two-meter-square tandem certification, and factory-roof specific-yield results showing a 10–20% advantage and no noticeable degradation over one and a half years.
About the speaker:
* Speaker: Dr. Bin Fan
* Companies: Kunshan GCL Optoelectronic Material Co.,Ltd
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteSingleJunction, #TandemModuleCertification, #IEC61215Testing, #SpecificYieldAdvantage, #PerovskitePhotovoltaics, #SolarModuleReliability
09:29 - 11:37
What module efficiencies were achieved, and what tandem power target is set for 2028?
What module efficiencies were achieved, and what tandem power target is set for 2028?
On flexible 30 by 30 centimeter modules, best efficiencies reached this year were tested at TU/e. On glass-glass format, efficiencies are higher because coating is easier and sheet resistance is better. Best glass-glass numbers are 23.7% single junction and 30.2% tandem, while commercial products reach just over 20% and 26.45% tandem.
These commercial figures are champion modules, and actual production is slightly lower. Estimated module-power progression starts with a two-square-meter single-junction module on the older ND line. A 2.78-square-meter single-junction module shows roughly the same increasing power trend. The tandem module's first four boxes still use TOPCon silicon cells.
In the middle of next year, a BC-based tandem module is expected, creating an efficiency jump in the second half of the year. The stated target is above 27% in 2028 for the large-format tandem module. Cost is described as an internal estimate.
In this short video, you can learn:
* Glass-glass champion modules reached 30.2% tandem and 23.7% single junction.
* Commercial tandem modules reached 26.45%, with production slightly lower than champion numbers.
* The 2028 target is above 27% for large-format tandem modules, with BC-based tandem expected mid-next year.
📋 **Clip Abstract** Glass-glass champion modules reached 23.7% single junction and 30.2% tandem, with commercial products at just over 20% and 26.45%. The roadmap moves from TOPCon-based tandem to a BC-based tandem in mid-next year and targets above 27% for large-format tandem modules in 2028.
About the speaker:
* Speaker: Dr. Bin Fan
* Companies: Kunshan GCL Optoelectronic Material Co.,Ltd
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#GlassGlassTandem, #TOPConSilicon, #BCBasedTandem, #LargeFormatTandem, #PerovskitePV, #TandemSolarCells
About this talk
→ Four Terminal Tandem Strategy for Perovskite · Dr. Bin Fan · Perovskite Connect 2026


