top of page

Dr. Qihao Jin

Prio Optics GmbH

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Dr. Qihao Jin | Prio Optics GmbH: Can inkjet printing match PVD's nanometer thickness control without any vacuum chamber?

00:50 - 02:15

Other snippets from this talk

Summary of the clip:

Can inkjet printing match PVD's nanometer thickness control without any vacuum chamber?

Optical interference coatings are stacks in which each layer is several tenths of a nanometer up to 200 nanometers thick. Printing such layers is usually challenging because this thickness precision must be maintained. The presented approach achieves nanometer precision in each layer by inkjet printing. The first-of-its-kind optical interference coatings are made by inkjet printing, and they are customizable and affordable and sustainable. Customization covers substrates, coating shape, material coatings, and coating functionality.

Because the process is inkjet printing, it does not need vacuum chambers like those required in PVD or CVD production lines. At the same time, it can achieve the same nanometer thickness resolution as PVD. This is the core comparison: vacuum-based deposition versus inkjet printing. The layer thickness range spans several tenths of a nanometer up to 200 nanometers, and the printing method must hold that precision across the stack. No vacuum chamber is used, yet the stated resolution target remains PVD-equivalent.

The method inkjet prints both thick layers and thin layers, and both maintain the thickness resolution. That capability is described as a natural property of the process. In the pancake analogy, ordinary pancakes are millimeters thick, while each optical interference coating layer is several tenths of a nanometer up to 200 nanometers. The demanded precision is therefore extreme for printing, but the reported result is nanometer precision in every layer. Customizable substrates, shapes, materials, and functionality accompany this precision.

In this short video, you can learn:
* Each optical interference coating layer ranges from several tenths of a nanometer up to 200 nanometers thick.
* Inkjet printing achieves nanometer thickness precision in each layer without vacuum chambers needed for PVD or CVD production lines.
* The process inkjet prints thick and thin layers while maintaining the same nanometer thickness resolution as PVD.

📋 **Clip Abstract** This clip explains how inkjet printing can produce optical interference coatings with each layer from several tenths of a nanometer up to 200 nanometers. It reports nanometer precision per layer, no vacuum chamber, and the same thickness resolution as PVD, while allowing customizable substrates, shapes, materials, and functionality.

About the speaker:
* Speaker: Dr. Qihao Jin
* Company: Prio Optics GmbH
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#OpticalInterferenceCoatings, #InkjetPrinting, #NanometerThicknessResolution, #PVDEquivalentResolution, #PrintedElectronics, #OpticalCoatings

This is a highlight of the presentation:

Precision Through Additive Manufacturing: Inkjet-Printed Optical Coatings

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

04:31 - 06:32

How precisely can 80,000 droplets per second land, and how much does a 1.6% volume wobble matter?

How precisely can 80,000 droplets per second land, and how much does a 1.6% volume wobble matter?

Droplet positioning is critical for inkjet printing. The deposition must uniformly form a thin layer on the substrate. Reported droplet resolution is within two microns. Since the droplet size on the surface is usually several tenths of microns, that two-micron placement error is small enough compared with the final droplet size, making it negligible. This precision supports inkjet printing of coatings, where each droplet's landing position matters as much as the material deposited.

Droplet size stability matters for every droplet and every dropping. At a jetting frequency of 80 K, the process jets 80,000 droplets per second. If droplet volume varies slightly, the deposited layer thickness can differ hugely after deposition. The observed variation is 1.6% for a four-picoliter droplet, roughly 60 femtoliters, which is extremely small. That stability enables fabrication of components such as micro lenses or uniform thin layers.

Inkjet printing is also very suitable for mass production. You can line up different heads, up to 30 or 50 heads together, to make a very large and very long source. This configuration enables single-pass fabrication of coatings. Combined with micron-level droplet positioning and stable droplet volume, the process can deposit uniform thin layers over a substrate while supporting mass production.

In this short video, you can learn:
* Droplet placement resolution is within two microns, negligible relative to surface droplet sizes of several tenths of microns.
* At 80 K jetting frequency, 80,000 droplets per second are jetted, so 1.6% volume variation in a four-picoliter droplet equals roughly 60 femtoliters and can create a huge difference in deposited layer thickness.
* Inkjet printing can line up 30 to 50 heads into a very large, very long source for single-pass coating fabrication.

📋 **Clip Abstract** Inkjet printing depends on critical droplet positioning and droplet size stability. Reported positioning resolution is within two microns, while 80,000 droplets per second, 1.6% volume variation, roughly 60 femtoliters, and up to 30–50 heads support uniform thin layers and single-pass coating fabrication.

About the speaker:
* Speaker: Dr. Qihao Jin
* Company: Prio Optics GmbH
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#InkjetPrinting, #DropletPositioning, #DropletSizeStability, #SinglePassCoatings, #PrintedElectronics, #AdditiveManufacturing

07:52 - 10:04

What thickness tolerance do interference coatings demand, and how close does printed output get to PVD?

What thickness tolerance do interference coatings demand, and how close does printed output get to PVD?

Interference optical coatings demand tight thickness control: the standard is 3% variation. For a 100-nanometer layer, that means about 3 nanometers. Inkjet printing achieved thickness control comparable to PVD: PVD is usually 1 to 3 nanometers, while printed coatings reach around 3 to 5 nanometers. Refractive index is flexible because ink can be formulated to tune the final coating material’s refractive index.

Scalability suits large-scale mass production because printing happens in ambient conditions without a vacuum chamber limitation. A SEM image shows a printed coating of roughly 50 layers, with different layer thicknesses and BAB materials combined. It achieves dielectric properties, light splitting, and spectral modulation. Surface roughness is around 1.5 nanometers, described as very low. The method can be applied to glass, PET substrates, and polymers, making it versatile.

Reproducibility matters for potential mass production. Different samples were characterized using full width at half maximum, and wavelength variation due to distribution stayed within one nanometer. That result is extremely good and already satisfies the standard of interference coatings. The coating thickness control, refractive index tuning, and ambient printing together support large-scale production. This combination addresses interference coating requirements without a vacuum chamber.

In this short video, you can learn:
* Interference coatings require thickness variation held to 3%, equivalent to about 3 nanometers in a 100-nanometer layer.
* Inkjet printing reached 3 to 5 nanometers thickness control, compared with 1 to 3 nanometers for PVD.
* Printed coatings with roughly 50 layers showed 1.5-nanometer roughness and wavelength variation within one nanometer.

📋 **Clip Abstract** Inkjet-printed interference optical coatings demand 3% thickness variation, about 3 nanometers for a 100-nanometer layer. Printed output reached 3 to 5 nanometers versus the PVD range of 1 to 3 nanometers, with refractive index tuned by ink formulation, 1.5-nanometer roughness, and wavelength variation within one nanometer.

About the speaker:
* Speaker: Dr. Qihao Jin
* Company: Prio Optics GmbH
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#InkjetPrintedCoatings, #InterferenceOpticalCoatings, #RefractiveIndexTuning, #FullWidthHalfMaximum, #PrintedElectronics, #AdditiveManufacturing


About this talk

→ Precision Through Additive Manufacturing: Inkjet-Printed Optical Coatings · Dr. Qihao Jin · The Future of Electronics RESHAPED 2025

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page