top of page

Elisa Duquet

Hummink

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Elisa Duquet | Hummink: How can printing repair open defects in displays by rebuilding missing connections and encapsulating them?

04:02 - 05:40

Other snippets from this talk

Summary of the clip:

How can printing repair open defects in displays by rebuilding missing connections and encapsulating them?

For industrial applications, the work is active in display and display repair manufacturing. The process can print silver lines thinner than 0.5 micrometers, which is useful for display applications where every micron matters. The lines are very dense and fine. The same approach can encapsulate those silver lines with polymers for better electrical performance. This combination targets precise, versatile deposition and protection in display manufacturing, where the printed features must remain exact across dense layouts.

When addressing display repair, there are typically two categories of defects. Short defects exist, but this repair approach does not achieve that kind of repair. The second category is open defects, where a missing component leaves a gap in the display. With this approach, the exact missing component or missing connection can be rebuilt. It is very precise, and the repair focuses on the damage area.

To repair an open defect, a laser first removes the damage area. Once that area is clear, the missing connection is rebuilt using the printing approach. The rebuilt connection can also be covered with polymer. After that, if required, printing can continue on the top layer. The work also shows an example of using the approach to print blue quantum dots.

In this short video, you can learn:
* Silver lines thinner than 0.5 micrometers can be printed for dense, fine display features where every micron matters.
* Open defects with a missing component or connection can be rebuilt, while short defects are not addressed by this repair method.
* A laser clears the damage area first; then the connection is rebuilt, covered with polymer, and printing can continue on top.

📋 **Clip Abstract** This clip covers display and display repair manufacturing, including printed silver lines thinner than 0.5 micrometers and polymer encapsulation for better electrical performance. It explains that open defects can be repaired by laser-clearing the damage area, rebuilding the missing connection, covering it with polymer, and optionally printing on top, with blue quantum dots as another example.

About the speaker:
* Speaker: Elisa Duquet
* Company: Hummink
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#SilverLinePrinting, #OpenDefectRepair, #PolymerEncapsulation, #BlueQuantumDots, #PrintedElectronics, #AdditiveElectronics

This is a highlight of the presentation:

HPCaP (High Precision Capillary Printing) : A Technology for Next-Generation
Manufacturing

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

01:07 - 02:25

How does AFM-inspired high-precision capillary printing reach sub-micron resolution without applying external forces?

How does AFM-inspired high-precision capillary printing reach sub-micron resolution without applying external forces?

High Precision Capillary Printing is inspired by Atomic Force Microscopy. The pipette is filled with ink and attached to a macro resonator. Instead of scanning the substrate, the tool prints on it while remaining in contact. The resonator oscillates at a fixed frequency. When contact with the substrate is achieved, an ink meniscus forms. A frequency shift occurs, and printing proceeds. This architecture supports any kind of inks and any shape, including dots and lines.

The resolution range is from 50 microns down to a few hundred nanometers, described as the safe zone. Printing relies only on capillary forces. No external forces are applied. The behavior is the natural behavior of a liquid confined in a capillary. This makes the process very precise and smooth. The team usually prints what they want to print. The approach combines contact, meniscus formation, and capillary confinement to define features without external force.

The slide demonstrates the versatility of the method. Because it can print any kind of inks and any shape, the process covers dots, lines, and other geometries. Resolution spans 50 microns to a few hundred nanometers. The pipette, macro resonator, fixed-frequency oscillation, meniscus, and frequency shift form the core mechanism. Printing occurs in contact with the substrate, but the substrate is not scanned. Capillary forces alone drive deposition, so no external forces are needed.

In this short video, you can learn:
* HP CAP uses a pipette filled with ink attached to a macro resonator oscillating at fixed frequency.
* Contact with the substrate forms an ink meniscus and produces a frequency shift used for printing.
* Resolution ranges from 50 microns down to a few hundred nanometers using only capillary forces, with no external forces applied.

📋 **Clip Abstract** High Precision Capillary Printing is an AFM-inspired contact method that uses an ink-filled pipette attached to a macro resonator oscillating at fixed frequency. When contact forms an ink meniscus, a frequency shift enables printing of any ink and shape from 50 microns down to a few hundred nanometers using only capillary forces.

About the speaker:
* Speaker: Elisa Duquet
* Company: Hummink
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#HighPrecisionCapillaryPrinting, #AFMInspiredContactPrinting, #MacroResonatorOscillation, #CapillaryForcePrinting, #PrintedElectronics, #AdditiveManufacturing

09:18 - 10:48

What are the physical constraints on nanoparticle size and pipette dimensions when printing sub-micron features using capillary forces?

What are the physical constraints on nanoparticle size and pipette dimensions when printing sub-micron features using capillary forces?

Positive pressure was shown as an extrusion mechanism, and its print resolution is somewhat not as fine as what one could use in a regular transistor. The capillary-pressure approach was compared directly on the following slide. The application under discussion was transistor repair, fixing an open defect later in the presentation. That framing matters because capillary forces, not positive extrusion, set the feature-size limit. The mechanism imposes a different set of material and tooling constraints.

Resolution runs from 50 microns down to a few hundred nanometers, depending on the inks used and the substrate. With the right conditions, 300 nanometers can be reached if needed. These are still nanoparticle inks. The rule is that nanoparticle size must be 10% smaller than the opening size of the pipette to print and to use the capillary forces. That condition links ink formulation directly to pipette geometry.

Pipettes are available in a wide range, from 50 micron upward, to cover the resolution of the technology. Different pipette sizes are used for different applications. The 10% size rule therefore constrains both ends: particles must fit through the opening, and the opening must support capillary-driven printing. At the 300-nanometer end, the relationship between nanoparticle diameter and pipette opening becomes the critical physical limit. The result is a resolution window defined by ink, substrate, and pipette dimensions rather than by positive pressure alone.

In this short video, you can learn:
* Positive-pressure extrusion resolution is not as fine as what one could use in a regular transistor, which frames the capillary-pressure comparison for transistor repair.
* The system reaches from 50 microns down to a few hundred nanometers, and can reach 300 nanometers if needed, depending on inks and substrate.
* Nanoparticle size must be 10% smaller than the pipette opening to print and use capillary forces, with pipettes available from 50 microns for different applications.

📋 **Clip Abstract** This clip contrasts positive-pressure extrusion with capillary pressure for high-precision printing, noting that extrusion resolution is not as fine as what one could use in a regular transistor, and frames the application as transistor repair to fix an open defect. It reports resolution from 50 microns down to a few hundred nanometers, 300-nanometer capability if needed, nanoparticle inks, a 10% nanoparticle-to-pipette-opening rule, and pipettes from 50 microns for different applications.

About the speaker:
* Speaker: Elisa Duquet
* Company: Hummink
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#NanoparticleInks, #CapillaryForces, #PipetteOpening, #TransistorRepair, #PrintedElectronics, #AdditiveElectronics


About this talk

→ HPCaP (High Precision Capillary Printing) : A Technology for Next-Generation Manufacturing · Elisa Duquet · The Future of Electronics RESHAPED 2025

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page