top of page

Eric Marcellin-Dibon

ENGO S.A.S.

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Eric Marcellin-Dibon | ENGO S.A.S.: Can smart glasses break the 40-gram weight barrier without sacrificing all-day battery life?

02:40 - 05:30

Other snippets from this talk

Summary of the clip:

Can smart glasses break the 40-gram weight barrier without sacrificing all-day battery life?

The ergonomics of smart glasses dictate a strict physical limit: a standard pair of glasses weighs around 20 grams, and consumer fatigue sets in rapidly past the 40-gram mark. This leaves a minuscule weight budget of just 10 to 15 grams for the entire active payload, which must accommodate the display, optics, battery, driver circuitry, and structural encapsulation.

This severe mass constraint directly throttles the battery capacity, translating to a relentless power budget of only 30 to 40 milliwatts if users expect multi-day autonomy. Compounding this challenge, every additional milliwatt of power consumption scales the required battery size and protective packaging, compounding the system mass and threatening the industrial design.

To build viable daily-wear AR, hardware architects must abandon the power-hungry paradigms of mixed-reality headsets. Success requires co-designing micro-displays and sensor engines that operate within this ultra-low-power regime, forcing a direct choice between sensor-rich feature sets and true all-day wearability.

In this short video, you can learn:
* Why the physical threshold of 40 grams defines the boundary between daily-wear eyewear and heavy headwear.
* How a 15-gram component weight limit restricts the system's power envelope to 30-40 milliwatts.
* The cascading engineering penalties of increasing battery capacity on the overall structural mass of smart eyewear.

📋 **Clip Abstract** This clip details the strict 40-gram weight constraint of consumer eyewear and how it translates to an ultra-lean 15-gram hardware budget. The speaker explains the thermal and mass-compounding penalties of battery scaling, restricting the target power envelope to just 30 to 40 milliwatts.

#ActivePayloadBudget, #MilliwattPowerEnvelope, #MicroDisplayCoDesign, #ThermalMassScaling, #AugmentedRealityHardware, #NearEyeDisplays

This is a highlight of the presentation:

How Display Choice and System Architecture Influence the Form Factor of Lightweight AR Glasses?

AR/VR Connect 2025

MicroLED Connect 2025

24-25 September 2025

Conference Centre, High Tech Campus, Eindhoven, Netherlands

Organised By:

TechBlick

MicroLED Industry Association

More Highlights from the same talk.

07:44 - 09:14

Why are flat AR waveguides failing the consumer fashion test?

Why are flat AR waveguides failing the consumer fashion test?

Planar optical waveguides represent a masterclass in thin-film light guide design, yet they clash fundamentally with the organic, curved geometry of standard prescription eyewear. Standard glasses rely on curved lenses with convex front and concave back surfaces, leaving no flat plane in between to integrate a conventional flat waveguide without adding significant thickness.

Attempting to laminate or sandwich a flat 1mm waveguide into a curved lens structure introduces an immediate weight penalty of approximately 10 grams per eye. In a device fighting for a sub-40-gram total weight, this structural compromise is unacceptable, forcing optics engineers to choose between fashion-forward curved shapes and bulky flat lenses.

Furthermore, the low coupling efficiency of flat waveguides places immense pressure on the light engine, demanding higher lumen output which drains the battery. To resolve this, the industry is pushing toward curved waveguides and ultra-thin glass, attempting to preserve optical path efficiency while conforming to traditional eyewear design.

In this short video, you can learn:
* The mechanical incompatibility between flat planar waveguides and standard curved prescription lens geometries.
* How adding a 1mm flat waveguide adds a severe 10-gram weight penalty to the optical stack.
* Why low waveguide efficiency forces a thermal and power penalty back onto the micro-display engine.

📋 **Clip Abstract** This clip addresses the geometric conflict between flat planar waveguides and standard curved consumer eyewear lenses. The speaker explains how embedding flat optics adds a ruinous 10-gram weight penalty and outlines the push toward thin, curved waveguides.

#CurvedWaveguides, #RxARLens, #UltraThinGlass, #WaveguideEfficiency, #SmartGlasses, #NearEyeDisplays

09:40 - 11:52

Is a massive Field of View the ultimate design trap for smart glasses?

Is a massive Field of View the ultimate design trap for smart glasses?

Many AR developers mistakenly push for wide fields of view (FoV), yet analyzing common consumer displays reveals that highly functional, context-rich interfaces require surprisingly small horizontal angles. An Apple Watch Ultra occupies roughly 5 to 6 degrees of horizontal FoV, a smartphone held at arm's length covers about 8 degrees, and a 60-inch television spans only 25 degrees.

For lightweight smart glasses, targeting a modest 10 to 15-degree horizontal FoV provides the optimal balance for notifications, navigation, and AI prompts. Exceeding this range demands larger, less efficient display pixels and drives a massive surge in power consumption, making the system virtually impossible to sustain within a milliwatt-scale battery budget.

To maximize system efficiency, developers must identify the sweet spot around a 20-micrometer display pixel pitch coupled with high-efficiency optics. By keeping the FoV highly targeted, engineers can maintain low power draw and prevent the thermal runaway that plagues larger immersive headsets.

In this short video, you can learn:
* Why a 10 to 15-degree horizontal Field of View is the optimal sweet spot for contextual AR applications.
* How the horizontal FoV of smart glasses compares directly to Apple Watches, smartphones, and televisions.
* The critical relationship between display pixel size, field of view, and total system power consumption.

📋 **Clip Abstract** This clip reframes the field-of-view debate by comparing smart glasses to existing consumer displays like smartwatches and smartphones. The speaker argues that a targeted 10-to-15-degree horizontal FoV is the optimal sweet spot for balancing usability with ultra-low power consumption.

#FieldOfView, #PixelPitch, #DisplayPowerEfficiency, #AROptics, #SmartGlasses, #AugmentedReality


About this talk

→ How Display Choice and System Architecture Influence the Form Factor of Lightweight AR Glasses? · Eric Marcellin-Dibon · MicroLED Connect + AR/VR Connect


Other talks by Eric Marcellin-Dibon

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page