top of page

Ernest Hasselbrink

Caelux

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Ernest Hasselbrink | Caelux: Why does a 1.3-year field T80 matter more than damp-heat data for perovskite tandem bankability?

09:22 - 11:27

Other snippets from this talk

Summary of the clip:

Why does a 1.3-year field T80 matter more than damp-heat data for perovskite tandem bankability?

Damp-heat performance is routinely shown for four-terminal tandems, but the speaker calls it not the important test. Focus is on ISO SL2—light, heat, atmospheric air and controlled temperature—plus an outdoor test facility. An older, now-obsolete technology completed a 1.5-year field test with T80 of about 1.3 years.

For bankability, accelerated tests must be correlated to field performance, so field data is needed to prove the ability to be in the field—a chicken-and-egg problem. Starting small and building up is the stated route, but such field data points remain critical. The next question is whether accelerated tests are predictive.

Predictiveness is tested by running accelerated tests at different temperatures and applying an Arrhenius model. The activation energies are very similar to those presented by another speaker and were published at PVSC last June. Applied to field conditions at the UC Merced site, the model predicts 1.3-year life—exactly what was seen in the field, which is very encouraging.

In this short video, you can learn:
* Damp-heat data is not the critical test; ISO SL2 and outdoor testing are the current focus.
* A 1.5-year field test on now-obsolete technology produced a T80 of about 1.3 years.
* Arrhenius modeling across temperatures predicted the same 1.3-year field life at UC Merced, supporting accelerated-test predictiveness.

📋 **Clip Abstract** The clip contrasts routine damp-heat displays with ISO SL2 and outdoor testing, then cites a 1.5-year field test on older technology with T80 near 1.3 years. It argues bankability needs accelerated tests correlated to field data, and an Arrhenius model across temperatures predicted the same 1.3-year life at UC Merced.

About the speaker:
* Speaker: Ernest Hasselbrink
* Company: Caelux
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#FourTerminalTandem, #DampHeatTesting, #ISOSL2, #FieldT80, #PerovskitePhotovoltaics, #PVBankability

This is a highlight of the presentation:

From Lab to Fab: Scaling and deployment of 1x2m perovskite at Caelux – wins and remaining challenges

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

04:45 - 06:45

How can a perovskite front glass be voltage-matched to a silicon module without changing system voltage or tracker layout?

How can a perovskite front glass be voltage-matched to a silicon module without changing system voltage or tracker layout?

The approach avoids building a stringer or tabbing system for silicon cells; the facility makes only the perovskite front glass and works with module developers. Rather than replicate the roughly 600 gigawatts of installed silicon-panel base, it supplies the front glass for silicon-based panels.

Voltage matching starts from a native set of about 240 volts: 200 cells at 1.2 volts each. That set can be divided into six, five, four or three strings to make roughly 80-, 60- or 40-volt panels. Cell pitch can then be changed to match voltage within about 0.6 volts.

The silicon manufacturer must choose a glass-glass panel with a PID edge seal; then the leads are tied together, yielding a two-terminal device. Four-terminal devices remain open. Tabs and additional busbar lanes cause shading loss, a trade-off weighed with module-level power electronics. The result is plug-and-play: no system-voltage change and no change to panels per tracker. About 5,000 one-by-two-meter panels have been made.

In this short video, you can learn:
* A 200-cell, 1.2-volt-per-cell native set gives about 240 volts, which can be split into six, five, four or three strings for roughly 80-, 60- or 40-volt panels.
* Changing cell pitch matches voltage within about 0.6 volts.
* The two-terminal glass-glass approach with a PID edge seal ties leads together, while tabs and busbar lanes add shading loss and four-terminal options remain open.

📋 **Clip Abstract** The approach makes only the perovskite front glass, leaving silicon stringing and tabbing to module developers and matching voltage to existing silicon modules rather than replicating the installed base. A glass-glass panel with a PID edge seal ties leads into a two-terminal device, with cell-pitch matching within about 0.6 volts, shading trade-offs from tabs and busbar lanes, and about 5,000 one-by-two-meter panels made to date.

About the speaker:
* Speaker: Ernest Hasselbrink
* Company: Caelux
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteFrontGlass, #CellPitchVoltageMatching, #PIDEdgeSeal, #TwoTerminalDevice, #PerovskitePV, #SiliconPV

12:00 - 13:11

What T80 lifetime does 1,100 hours at 85°C in ambient air imply at 20°C versus 35°C ambient?

What T80 lifetime does 1,100 hours at 85°C in ambient air imply at 20°C versus 35°C ambient?

The accelerated test chart contrasts the older PAYDFF technology, now obsolete, with its corresponding field data. Since producing that technology, durability has improved dramatically: the current result is about 1,100 hours at 85°C in ambient air under one-sun exposure. That is the basis for the lifetime projection, not a field lifetime itself.

Using the activation energy, the projection gives T80 of 50 years at NOCT/NMOT, corresponding to 20°C ambient. The device temperature in that calculation is 42°C. But hot days are exponentially more taxing on panels than those 42°C device days, so the 20°C-ambient result is not the whole deployment story.

Running the same calculation at 57°C device temperature, roughly 35°C ambient, yields T80 of 14 years. That sharp drop from 50 years shows why field testing is the next phase. The work still has a long road to go on field testing, and this is the phase now beginning.

In this short video, you can learn:
* At 85°C in ambient air and one sun, the accelerated result is about 1,100 hours, up from the older PAYDFF technology.
* Activation-energy projection gives T80 of 50 years at NOCT/NMOT with 20°C ambient and 14 years at 57°C device temperature, roughly 35°C ambient.
* Hot days are exponentially more taxing than 42°C device days, so field testing is the next phase.

📋 **Clip Abstract** The clip contrasts obsolete PAYDFF accelerated and field data with a current result of about 1,100 hours at 85°C in ambient air under one sun. Using activation energy, it projects T80 of 50 years at 20°C ambient and 14 years at roughly 35°C ambient, then flags field testing as the next phase.

About the speaker:
* Speaker: Ernest Hasselbrink
* Company: Caelux
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#T80Lifetime, #ActivationEnergy, #AmbientAirTesting, #OneSunExposure, #PerovskitePhotovoltaics, #SolarCellStability

06:41 - 08:30

What efficiency adder does a 17% perovskite front glass give a 25% silicon module, and what is it worth?

What efficiency adder does a 17% perovskite front glass give a 25% silicon module, and what is it worth?

To date, about 5,000 one-by-two-meter panels have been made, with an MRV rack shown for demos to customers and national labs. The stated goal is to be agnostic to silicon: make any silicon panel more powerful. The current production Hero is a 17% perovskite panel in one-by-two-meter format.

About 40% of sunlight passes through to the silicon layer. On a 25% silicon technology, that gives about a 10% adder; less efficient silicon gives less. Added on top of the 17% panel, this implies a 27% tandem. The roadmap targets 28.2% in short order, and orders are being taken now.

Significant efficiency improvements have been made over the last year. Economically, boosting plant efficiency by 20% at about one dollar per watt in the United States adds 20 cents of value, described as a substantial gain for the power plant. This is the commercial case for the tandem adder.

In this short video, you can learn:
* About 5,000 one-by-two-meter panels have been produced, including demos for customers and national labs.
* A 17% perovskite front panel passing about 40% sunlight yields about a 10% adder on 25% silicon, implying 27% tandem.
* Roadmap targets 28.2%, and a 20% plant-efficiency boost on a $1/W plant adds 20 cents of value.

📋 **Clip Abstract** The talk reports about 5,000 one-by-two-meter panels made and a 17% production Hero panel that passes roughly 40% of sunlight to silicon. The resulting ~10% adder on 25% silicon implies a 27% tandem, with a 28.2% roadmap target and a 20-cent-per-watt value case at $1/W.

About the speaker:
* Speaker: Ernest Hasselbrink
* Company: Caelux
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteFrontGlass, #SiliconTandem, #MRVRack, #OneByTwoMeterPanel, #PerovskiteSolar, #TandemPV

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page