Eva-Maria Hammer | Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg ZSW: Why recycle perovskite modules now, when the industry is only scaling toward gigawatts?
00:59 - 03:18
Other snippets from this talk
Summary of the clip:
Why recycle perovskite modules now, when the industry is only scaling toward gigawatts?
Recycling is being started before gigawatt-scale production matures because the projected global market share for perovskites is 17% by 2036, and many companies are already upscaling. A research fund brings two recycling partners together: Solar Materials handles module separation, Solaveni GmbH recycles materials, and the project also covers manufacturing. The point is to prepare recovery before large volumes arrive.
The standard perovskite stack has very thin layers, so the recycling question is what to target. The focus is predominantly TCOs and ITOs: material scarcity is driven by back contacts and front contacts, especially transparent electrodes and indium. Indium production is close to or above what would be needed to produce all those modules, and a substantial amount is bound within existing modules.
Lead is not as scarce as indium but is toxic, so the project also targets recycling of those lead units. It additionally examines reuse of glass substrates, and in the future flexible substrates, because substrate material costs are among the most expensive in the stack and drive module cost. This applies to flexible as well as rigid modules.
In this short video, you can learn:
* A 17% projected global perovskite market share by 2036 is the timing signal for starting recycling before gigawatt-scale volumes arrive.
* Thin perovskite stacks shift recovery attention to TCOs and ITOs, with indium scarcity tied to transparent front and back contacts.
* Lead is targeted for toxicity rather than scarcity, while glass and future flexible substrates are targeted because they are among the stack's most expensive materials.
📋 **Clip Abstract** The talk argues for starting perovskite minimodule recycling before gigawatt-scale manufacturing matures, citing a projected 17% global market share by 2036. It prioritizes TCO/ITO and indium recovery, lead recycling for toxicity, and glass or flexible substrate reuse because those materials dominate stack cost and scarcity.
About the speaker:
* Speaker: Eva-Maria Hammer
* Company: Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg ZSW
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteRecycling, #IndiumRecovery, #LeadUnitRecycling, #GlassSubstrateReuse, #PerovskitePV, #SolarModuleRecycling
This is a highlight of the presentation:
Recycling Procedure of Perovskite Minimodules
21 and 22 OCT 2026
Estrel, Berlin
Organised By:
More Highlights from the same talk.
07:09 - 09:31
Can you recover 96% lead iodide while separating perovskite modules without breaking glass or destroying TCO?
Can you recover 96% lead iodide while separating perovskite modules without breaking glass or destroying TCO?
Starting with perovskite layers coated on plain glass substrates, partners recovered lead iodide from the material and from samples taken out of encapsulation trials. The project target was 90% recovery, but the partners achieved 96% lead iodide recovery at 99.96% purity. The recovered material was later reused, with data presented separately.
For an area-sealed module, applying heat up to 160 °C allowed separation, but the top glass broke, so the module was discarded. Achieving clean separation where an area seal exists proved tricky. This makes sealant choice a key design question: the sealant must be separable afterwards.
Sandwich modules were easier to take apart, but removing residual perovskite and organics required harsher agents such as hydrochloric acid, which damaged the TCO and made the glass unusable for recycling. Glass-glass modules without area sealing worked best: the two glasses separated easily at 140–150 °C without breakage, and the rubber edge moved cleanly before washing.
In this short video, you can learn:
* Partners recovered 96% lead iodide at 99.96% purity, exceeding the 90% target.
* Area-sealed modules heated to 160 °C suffered top-glass breakage, highlighting sealant separability as a design issue.
* Hydrochloric acid cleaning of sandwich modules damaged the TCO, whereas unsealed glass-glass modules separated at 140–150 °C without breakage.
📋 **Clip Abstract** The recycling route recovered 96% lead iodide at 99.96% purity from coated glass and encapsulation-trial samples, above a 90% target. Module dismantling showed area-sealed modules broke glass at 160 °C and sandwich modules required hydrochloric acid that damaged TCO, while unsealed glass-glass modules separated cleanly at 140–150 °C.
About the speaker:
* Speaker: Eva-Maria Hammer
* Company: Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg ZSW
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#LeadIodideRecovery, #AreaSealSeparation, #TCODamage, #GlassGlassModules, #PerovskiteSolarCells, #ModuleRecycling
11:57 - 13:29
How much performance is lost when recycled lead iodide is put back into perovskite cells and modules?
How much performance is lost when recycled lead iodide is put back into perovskite cells and modules?
On the glass side, sealed samples that had not been broken gave a good indication that the glasses can actually be recycled and reused. Turning to the lead iodide, cells rebuilt with recycled iodide show a slight drop in performance but stay fairly close to the reference cells. The origin is not settled — possibly the perovskite film structure that is forming.
At module level the difference was not really visible, which makes the team quite confident that the iodide can be recycled and lands close to the performance expected from fresh samples. The project ended before the residual gap could be investigated further, so the film-formation question remains open for follow-up work.
The recycled-iodide samples also went into outdoor testing. They performed fairly similar to the samples kept outdoors, and after a slight initial drop they stabilized quite nicely. Data collection continues — the samples were believed to be still running at the time of the talk, so longer-term numbers are still to come.
In this short video, you can learn:
* Recycled lead iodide gives a slight performance drop versus reference cells, small enough that the module-level difference was not really visible.
* Sealed, unbroken samples indicate that the glass can be recycled and reused.
* Outdoor-tested recycled-iodide samples stabilized nicely after a slight initial drop and were still running.
📋 **Clip Abstract** Glass from sealed perovskite minimodules shows good indications of being recyclable and reusable, while cells rebuilt from recycled lead iodide sit slightly below reference performance. Module-level results and outdoor testing show no huge difference, with the samples stabilizing after an initial drop.
About the speaker:
* Speaker: Eva-Maria Hammer
* Company: Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg ZSW
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#LeadIodideRecovery, #PerovskiteMinimodule, #SealedSampleRecycling, #OutdoorSoakingTest, #PerovskitePhotovoltaics, #SolarModuleRecycling
10:18 - 11:58
Can anisole and KOH cleaning preserve TCO and let recycled perovskite glass match fresh performance?
Can anisole and KOH cleaning preserve TCO and let recycled perovskite glass match fresh performance?
The cleaning route moved to anisole, already used in coating, followed by dishwasher washing with KOH, while glass properties were tracked throughout. TCO resistance stayed quite constant and comparable to fresh glass, and transmittance remained comparable. Recycled and fresh substrates were measured, with some transmittance gained during cleaning, especially in one area.
Because there was no indication from those measurements that the glass could not be reused, perovskite cells were coated again on the recycled glasses. Device performance, if anything, was slightly improved. Mini-modules had limited statistics, but performance generally did not get worse. The champion module reached around 15.2% efficiency.
The key condition is cleaning off the surface without breaking the TCO, which was necessary in the sealed-sample area. Across resistance, transmittance and subsequent device results, the recycled glass showed no sign of being unusable. The data therefore support reuse of cleaned TCO glass for perovskite deposition and minimodule fabrication.
In this short video, you can learn:
* Anisole plus KOH dishwasher cleaning kept TCO resistance and transmittance comparable to fresh glass.
* Perovskite cells recoated on recycled glass showed no performance loss and, if anything, slight improvement.
* The champion recycled-glass minimodule reached about 15.2% efficiency, with limited mini-module statistics.
📋 **Clip Abstract** A cleaning process using anisole and KOH dishwasher washing was evaluated by tracking TCO resistance and transmittance on recycled perovskite glass. The cleaned glass remained comparable to fresh glass, recoated cells did not degrade, and a champion minimodule reached around 15.2% efficiency.
About the speaker:
* Speaker: Eva-Maria Hammer
* Company: Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg ZSW
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteRecycling, #TCOGlass, #AnisoleKOHCleaning, #MinimoduleEfficiency, #PerovskiteSolarCells, #Photovoltaics
About this talk
→ Recycling Procedure of Perovskite Minimodules · Eva-Maria Hammer · Perovskite Connect 2026


