top of page

Fabian Fertig

Qcells

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Fabian Fertig | Qcells: When module manufacturing outside China struggles, where do perovskite-silicon tandems earn their efficiency premium?

17:23 - 19:08

Other snippets from this talk

Summary of the clip:

When module manufacturing outside China struggles, where do perovskite-silicon tandems earn their efficiency premium?

The profitability question is not tied to one PV technology: outside China, manufacturing any module at a profit is currently very challenging. Qcells makes a profit by manufacturing and selling in the United States, showing boundary conditions can allow money to be made. Once those conditions exist, efficiency potential becomes leverage, and that leverage is higher in markets that honor it more—rooftops first.

For utility scale, area-driven costs are very high—land, work and permits—and higher efficiencies scale all of that down. The speaker says it depends on the individual business case how this is done. That links tandem value to where area costs dominate and where efficiency is highly valued, rather than assuming one universal module economics.

Fifteen years in PV, the speaker's experience is that a new technology with a better performance-to-cost ratio takes over the industry within one to two years—monocrystalline silicon, half cells and TOPCon went quickly. The open question is whether perovskite-silicon tandems have an advantage only where efficiency is highly valued, or are superior across most of the market and follow a similar path. Qcells believes they can be that next step.

In this short video, you can learn:
* Outside China, manufacturing any PV module at a profit is currently very challenging; Qcells does so by manufacturing and selling in the United States.
* Higher efficiencies leverage area-driven utility-scale costs such as land, work and permits, while rooftops honor efficiency benefits more.
* New PV technologies with a better performance-to-cost ratio took over the industry in one to two years, examples being monocrystalline silicon, half cells and TOPCon.

📋 **Clip Abstract** The clip argues profitability depends on boundary conditions, not a specific PV technology: outside China profit is hard, while Qcells profits from US manufacturing and selling. It asks whether perovskite-silicon tandems will win only where efficiency is highly valued or across most markets, given the one-to-two-year takeover pattern of monocrystalline silicon, half cells and TOPCon.

About the speaker:
* Speaker: Fabian Fertig
* Company: Qcells
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteSiliconTandem, #PerformanceToCostRatio, #AreaDrivenCosts, #TOPConTakeover, #Photovoltaics, #SolarModuleManufacturing

This is a highlight of the presentation:

Scaling Perovskite-Silicon Tandems: From Lab Records to Industrial M10 Wafer Production

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

07:13 - 08:26

How much efficiency was lost scaling perovskite-silicon from lab cells to full-area M10 wafers—and what unlocked the recovery?

How much efficiency was lost scaling perovskite-silicon from lab cells to full-area M10 wafers—and what unlocked the recovery?

Scaling from lab sizes to full wafer area was not straightforward, but a relatively steep learning rate followed. By the end of that phase, medium batch efficiencies exceeded 27% on full-area M10 wafers. Development then hit limitations, prompting a pilot-line upgrade for higher throughputs: every process was exchanged with equipment and the corresponding process to run at relatively high volume.

That upgrade enabled faster development. At the end of 2024, a total area efficiency of 28.6% was achieved—to the speaker’s knowledge the highest total area efficiency for perovskite on silicon at the time, on par with Oxford PV, which had basically the same value. The distribution was not as clean as silicon yet, leaving potential to go up.

With high-throughput processes, batch median efficiencies are now exceeding 29% on full-area M10 wafers. The remaining gap is visible in the distribution: it is still not quite as clean as for silicon, so there is still potential going up. The sequence links full-area scaling, pilot-line throughput and median batch results rather than isolated lab records.

In this short video, you can learn:
* Full-area M10 medium batch efficiencies passed 27% before development limitations forced a pilot-line throughput upgrade.
* At end-2024, total area efficiency reached 28.6%, described as the highest for perovskite on silicon at the time and on par with Oxford PV.
* High-throughput processes now give batch median efficiencies exceeding 29% on full-area M10 wafers, though the distribution remains less clean than silicon.

📋 **Clip Abstract** Scaling perovskite-silicon from lab sizes to full-area M10 wafers was not straightforward; a steep learning rate took medium batch efficiencies above 27%, then development limitations drove a pilot-line upgrade for higher throughputs and process-equipment exchanges. End-2024 total area efficiency reached 28.6%, on par with Oxford PV at the time, and high-throughput processes now exceed 29% batch median efficiency on full-area M10, with distributions still less clean than silicon.

About the speaker:
* Speaker: Fabian Fertig
* Company: Qcells
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteSilicon, #M10Wafer, #PilotLineUpgrade, #BatchMedianEfficiency, #PerovskiteTandems, #SolarCellManufacturing

15:05 - 15:59

Why does Qcells choose 2T over 4T for perovskite-silicon tandems?

Why does Qcells choose 2T over 4T for perovskite-silicon tandems?

Three main advantages define the two-terminal case. It has the highest efficiency potential, it has the lowest cost potential, and it offers advantages in terms of reverse biasing. Taken together, those three points are the argument put forward for the two-terminal route over the four-terminal alternative.

Reverse biasing matters because modules face shading events. A two-terminal stack, in this reading, should stay relatively robust when some sort of shading event occurs. That robustness is framed as a third pillar standing next to the efficiency and cost arguments rather than being traded against them.

The one disadvantage acknowledged is narrow: in very specific scenarios where the albedo or spectra differ strongly from regular applications, a four-terminal device might deliver a higher energy yield. The analysis done so far shows that for most applications that difference does not outweigh the two-terminal advantages — hence the conclusion that two-terminal is the way to go.

In this short video, you can learn:
* Two-terminal tandems are credited with the highest efficiency potential, the lowest cost potential and better reverse-bias behaviour.
* Shading events are the field condition where the reverse-bias tolerance is expected to keep the module relatively robust.
* A four-terminal stack may win on energy yield only in very specific scenarios with very different albedo or spectra, a niche that has not outweighed the two-terminal advantages in the analysis so far.

📋 **Clip Abstract** A direct comparison of two-terminal and four-terminal perovskite-silicon tandems, argued from efficiency potential, cost potential and reverse-bias behaviour. The four-terminal exception is confined to atypical albedo or spectra, and the analysis to date does not let that niche outweigh the two-terminal case.

About the speaker:
* Speaker: Fabian Fertig
* Company: Qcells
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteSiliconTandem, #TwoTerminalTandem, #ReverseBiasRobustness, #ShadingTolerance, #PerovskitePhotovoltaics, #TandemSolarCells

09:09 - 10:38

Why can the highest initial-efficiency process be the wrong choice for a reliable tandem module?

Why can the highest initial-efficiency process be the wrong choice for a reliable tandem module?

Reliability was tracked in every product-development phase, not treated as a final check. The key learning is that many process parameters and other aspects have a significantly stronger impact on reliability than on initial performance. That changes how a process window is selected: the initial-efficiency leader is not automatically the industrial choice.

In the example shown, the top chart puts the initial-efficiency optimum around process B. After stress, the bottom chart shifts the optimum toward COD. This is typical: the optimum for initial efficiency is not always where an industrial device should be placed. The work has systematically pushed each device aspect toward the combined reliability and performance optimum.

One result is independent certification according to IEC and UL 61215 standards. TÜV Rheinland independently certified it, and, to my knowledge, this is the first such certification for a two-terminal perovskite-on-silicon device. That outcome came from pushing every aspect of the device into the reliability and performance optimum, rather than optimizing initial efficiency alone.

In this short video, you can learn:
* Many process parameters affect reliability more strongly than initial performance.
* The initial-efficiency optimum can shift after stress, as shown from process B to COD.
* Independent IEC and UL 61215 certification was obtained with TÜV Rheinland for a two-terminal perovskite-on-silicon device, described as the first such certification.

📋 **Clip Abstract** The clip explains why reliability, not initial efficiency alone, drove process selection across product development. It shows an initial-efficiency optimum near process B shifting toward COD after stress, and reports independent IEC and UL 61215 certification by TÜV Rheinland for a two-terminal perovskite-on-silicon device, described as the first such certification.

About the speaker:
* Speaker: Fabian Fertig
* Company: Qcells
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteSiliconTandem, #TwoTerminalTandem, #IEC61215Certification, #PostStressEfficiency, #PerovskitePhotovoltaics, #SolarCellReliability

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page