Frédéric Soulier | Ceradrop - MGI Digital Technology: How much power, ink and processing time does switching from a conventional process to digital additive printing cut?
06:16 - 07:41
Other snippets from this talk
Summary of the clip:
How much power, ink and processing time does switching from a conventional process to digital additive printing cut?
The move away from a conventional process toward a digital additive process changes what the factory floor has to do, even for mask layers. Because it is a printing process, the development step after exposure disappears, along with the chemical steps and stripping that surround it. Three separate pieces of equipment collapse into one, which is why this shift matters for industrial transformation today.
The quantified impact is a 70% reduction in power consumption, a 50% reduction in ink usage, and a 50% reduction in processing time. Those three figures come from one change: consolidating three equipment into one and removing the development step after exposure, the chemical steps and the stripping. All of that belongs to the conventional process, not the additive one. The equipment is designed to address this market, and it enables very high productivity while still being able to run a conventional process.
The tooling that makes this possible is described as equipment that will be shown in product next week or next month, and it carries the first case of this industrial digital additive sustainable approach coming from the industry itself. The claim is not a laboratory result: it is a production configuration that handles the market, reaches very high productivity, and can also process conventionally. That dual capability is what makes the transition practical rather than disruptive.
In this short video, you can learn:
* Switching from a conventional process to digital additive printing delivers a 70% reduction in power consumption, 50% in ink usage and 50% in processing time.
* The additive route removes the development step after exposure, the chemical steps and the stripping, and consolidates three equipment into one.
* The equipment for this market will be shown in product next week or next month, enables very high productivity and can also run a conventional process.
📋 **Clip Abstract** Digital additive printing replaces a conventional process even for mask layers, removing development after exposure, chemical steps and stripping, and collapsing three equipment into one. The result is 70% less power consumption, 50% less ink usage and 50% less processing time, with the same equipment able to run a conventional process.
About the speaker:
* Speaker: Frédéric Soulier
* Company: Ceradrop - MGI Digital Technology
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#DigitalAdditivePrinting, #MaskLayerPatterning, #PowerConsumptionReduction, #ProcessingTimeReduction, #PrintedElectronics, #SustainableElectronics
This is a highlight of the presentation:
Driving Growth Through Innovation: The Role of Additive Processes in Electronics Manufacturing
More Highlights from the same talk.
07:42 - 10:13
Can inkjet printing deliver free-shape organic photovoltaics, multi-material ceramic capacitors and batteries charging five times faster?
Can inkjet printing deliver free-shape organic photovoltaics, multi-material ceramic capacitors and batteries charging five times faster?
An organic photovoltaic module has been fully printed by inkjet, using inkjet equipment originating from the MGI Group. The application is ambient light harvesting: organic photovoltaics intended to replace batteries in IoT devices. The digital printing benefit is free-shape deposition — you print the shape you want around your final product, working additively and addressing the end product directly. That also enables personalisation, which is the gain quoted for industrial transformation today.
The second case is energy storage using MLCC components — multilayer ceramic components, meaning capacitors are built on one equipment. The claim is multi-process in one machine, with different materials and different players addressed on the same equipment. The digital printing benefit repeats here: free shape, so the shape you want for the components, and personalisation. Free shape and personalisation are the two gains the digital process brings to component manufacture.
A third case is energy storage in batteries, where the discussion concerns microstructure and five-times faster charging. Additive printing is presented as compatible with that microstructure, and the same digital printing step sits on top of the additive manufacturing process. Across these three areas — printed OPV, ceramic capacitors and batteries — the equipment is serving a lot of customers and partners who are already using it.
In this short video, you can learn:
* An OPV module has been fully inkjet printed for ambient light harvesting, targeting battery replacement in IoT.
* MLCC capacitor manufacture is presented as multi-process, multi-material work on a single equipment platform, gaining free shape and personalisation.
* Battery work centres on microstructure and five-times faster charging, with digital printing added on top of the additive manufacturing process.
📋 **Clip Abstract** Digital inkjet printing is positioned as the process behind free-shape organic photovoltaic modules for ambient light harvesting, multi-material ceramic capacitor production and battery microstructures. Across all three cases the recurring benefits cited are free-shape deposition, personalisation and multi-material processing on one equipment platform.
About the speaker:
* Speaker: Frédéric Soulier
* Company: Ceradrop - MGI Digital Technology
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#InkjetPrinting, #FreeShapeDeposition, #MLCC, #AmbientLightHarvesting, #PrintedElectronics, #AdditiveManufacturing
00:06:23 - 00:08:48
How can a single inkjet process replace four conventional steps in PCB manufacturing and cut energy use by 70%?
How can a single inkjet process replace four conventional steps in PCB manufacturing and cut energy use by 70%?
The conventional manufacturing of Printed Circuit Boards (PCBs) and Flexible Printed Circuits (FPCs) involves multiple complex, subtractive, and resource-intensive stages for applying solder mask, etch resist, and legend printing. These analog processes typically require separate steps for coating, exposure, developing, and stripping, leading to significant material waste, energy consumption, and long cycle times, making them ill-suited for high-mix, low-volume production. This traditional workflow presents a major bottleneck for manufacturers looking to adopt more agile and sustainable production methods aligned with Industry 5.0 principles.
Ceradrop, in partnership with PCB imaging leader Altix, has developed a disruptive digital additive solution that fundamentally changes this paradigm. By leveraging industrial single-pass inkjet printing technology, they have created a machine that consolidates four traditional manufacturing stages into a single, streamlined step. This digital process additively deposits the solder mask, resist, or legend ink precisely where needed, eliminating the waste associated with subtractive methods and dramatically simplifying the entire production workflow.
The commercial and environmental impact of this innovation is substantial. The single-pass inkjet system reduces power consumption by an incredible 70% compared to the traditional process. Furthermore, it cuts ink consumption and operational time by 50% each, all while requiring only a single operator. This not only creates immense value and cost savings for PCB/FPC producers but also enables local, on-demand manufacturing, strengthening regional supply chains and reducing the reliance on outsourcing.
In this short video, you can learn:
* How digital inkjet printing is disrupting conventional PCB and FPC manufacturing.
* The benefits of consolidating four process steps (solder mask, etch resist, legend) into one.
* The quantifiable savings in energy (70%), ink (50%), and operational time (50%).
📋 **Clip Abstract** Ceradrop introduces a game-changing digital additive process for PCB manufacturing that replaces four conventional stages with a single-pass inkjet system. This innovation delivers staggering reductions in energy consumption, material waste, and operational time, enabling agile and sustainable local production.
🔗 Link in comments 👇
#SinglePassInkjet, #AdditiveManufacturing, #DigitalManufacturing, #PCBManufacturing, #PrintedElectronics, #FlexibleElectronics
13:21 - 15:01
What hardware lets one printed electronics platform combine inkjet, aerosol jet, nanojet and micro-dispensing?
What hardware lets one printed electronics platform combine inkjet, aerosol jet, nanojet and micro-dispensing?
The market position is one equipment with multiple configurations. Inside a printed electronics system you find a lot of different deposition methods, curing systems and in-line characterisation devices, plus a lot of materials to handle. That diversity is why the platform uses many print heads rather than a single fixed deposition route. The same frame has to host deposition, curing and measurement without rebuilds.
On the deposition side, the hardware can embed up to four deposition methods, so a user selects the combination that fits the job. Aerosol jet and nanojet get dedicated heads, and micro-dispensing is also available for probing and characterisation work. Curing and photo systems sit in the same multi-process platform, so deposition, curing and in-line checking stay inside one tool.
The equipment is described as very versatile: it can be applied to characterise a process and then to produce parts. Because layers are programmed individually, different materials, different deposition methods and different curing settings can be combined in one build. Print heads span from a single head configuration up to the latest film head, which is what makes the four-method arrangement possible on a single machine.
In this short video, you can learn:
* One platform can be configured with up to four deposition methods instead of being tied to a single print process.
* Aerosol jet and nanojet use dedicated heads, while micro-dispensing covers probing and characterisation.
* Layers can be programmed with different materials, different deposition methods and different curing settings on the same equipment.
📋 **Clip Abstract** A printed electronics platform is configurable with multiple deposition methods, curing systems and in-line characterisation inside one frame. Aerosol jet, nanojet and micro-dispensing heads, up to four deposition methods and programmable layers let one machine characterise a process and then produce with it.
About the speaker:
* Speaker: Frédéric Soulier
* Company: Ceradrop - MGI Digital Technology
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#AerosolJet, #Nanojet, #MicroDispensing, #InLineCharacterisation, #PrintedElectronics, #AdditiveElectronics
About this talk
→ Driving Growth Through Innovation: The Role of Additive Processes in Electronics Manufacturing · Frédéric Soulier · The Future of Electronics RESHAPED 2025
Other talks by Frédéric Soulier
- Digital Printed Electronics solutions : enabling industrialisation · The Future of Electronics RESHAPED 2024 Berlin
More highlights from Frédéric Soulier
- ▶ How can a single inkjet process replace four conventional steps in PCB manufacturing and cut energy use by 70%? · The Future of Electronics RESHAPED 2024
- ▶ What if you could combine inkjet, aerosol jet, and micro-dispensing with multiple curing and inspection systems in a single machine? · The Future of Electronics RESHAPED 2024
- ▶ Can one printing technology enable on-demand manufacturing for everything from solar cells to temperature sensors? · The Future of Electronics RESHAPED 2024


