top of page

German Soto Perez

Dracula Technologies

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

German Soto Perez | Dracula Technologies: What ink, printhead and substrate trade-offs determine inkjet OPV film quality and defect rates?

04:12 - 06:11

Other snippets from this talk

Summary of the clip:

What ink, printhead and substrate trade-offs determine inkjet OPV film quality and defect rates?

Ink rheology must be on point: the fluid needs enough energy to create a drop without splashing, which sets printability quality. Printhead technology is also important because the setup depends on the ink type and must suit the printing. The substrate then controls deposition, and its activation, print speed, size and file must be known before printing.

Wettability is a trade-off. Poor wettability prevents a nice even film, while high wettability loses the precision gained with inkjet printing. The properties therefore must be tailored to reach optimal wettability. When they are not tailored well, the process can show missing nozzles, pinholes and different rates of drying.

The knowledge spans ink rheology, printhead setup and substrate behaviour. Printhead setup depends on ink type, and substrate deposition depends on activation, speed, size and file. Missing nozzles, pinholes and different drying rates exemplify what happens when properties are not tailored well.

In this short video, you can learn:
* Ink rheology must provide enough energy to form a drop without splashing to achieve printability quality.
* Printhead setup must be matched to the ink type for suitable printing.
* Poor wettability causes uneven films, while excessive wettability sacrifices inkjet precision, and untailored properties can produce missing nozzles, pinholes or different drying rates.

📋 **Clip Abstract** Inkjet OPV film quality depends on tailoring ink rheology, printhead setup and substrate properties. Poor or excessive wettability and untailored properties can lead to uneven films, lost precision, missing nozzles, pinholes and different drying rates.

About the speaker:
* Speaker: German Soto Perez
* Company: Dracula Technologies
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#InkjetOPV, #InkRheology, #PrintheadSetup, #SubstrateWettability, #OrganicPhotovoltaics, #PrintedElectronics

This is a highlight of the presentation:

Mass production of organic photovoltaics with inkjet printing

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

02:31 - 04:12

Why choose inkjet printing over other solution-processable techniques for organic photovoltaics?

Why choose inkjet printing over other solution-processable techniques for organic photovoltaics?

Among solution-processable techniques for organic photovoltaics, inkjet printing was selected because it is versatile, cost-effective and flexible, giving significant design flexibility. It is contact-free and fully digital, so design turnaround is easy. That combination supports varying thicknesses, which matters for OPV and perovskite layers, and allows thickness optimization.

Additional advantages include customizability through compatibility with previous manufacturing processes and adaptation, plus fast turnaround because designs can be changed quickly according to requirements. Cost-effectiveness comes from drop-on-demand operation: only the amount of ink required is used. The stated summary is that inkjet printing is flexible, precise, quick and sustainable, while factors still need to be taken into account.

The comparison is not only about deposition; it is about design iteration. Because inkjet is fully digital and contact-free, designs can be turned around easily, and thickness can be varied and optimized—important for OPV and perovskite layers. Drop-on-demand limits ink use to what is required. The speaker cautions that these advantages bring responsibilities: factors must be taken into account.

In this short video, you can learn:
* Inkjet printing was selected for OPV among solution-processable techniques for versatility, cost-effectiveness and design flexibility.
* Being contact-free and fully digital, it allows easy design turnaround and thickness variation for OPV and perovskite layers.
* Drop-on-demand uses only the ink required, but the speaker notes that factors must still be taken into account.

📋 **Clip Abstract** Inkjet printing was chosen among solution-processable techniques for organic photovoltaics because it is versatile, cost-effective and flexible. Its contact-free, fully digital operation enables easy design turnaround, thickness variation and drop-on-demand ink use, although factors must be taken into account.

About the speaker:
* Speaker: German Soto Perez
* Company: Dracula Technologies
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#InkjetPrinting, #DropOnDemand, #ContactFreeDeposition, #ThicknessOptimization, #OrganicPhotovoltaics, #PrintedElectronics

13:24 - 14:31

What annual production capacity can an inkjet OPV line deliver for custom IoT modules?

What annual production capacity can an inkjet OPV line deliver for custom IoT modules?

The line's capacity is stated by year rather than by hour: 50 million square centimeters annually. That figure is not a fixed device count, because customizable geometries mean a tiny cell and a larger module do not take the same time. The speaker also cautions that 50 million is not an hourly rate.

Per-hour output is described as challenging to specify. The advantage of customizable geometries creates variable timing, so throughput cannot be reduced to one simple devices-per-hour number. The annual area capacity is therefore the clearer metric given in the clip, while the hourly figure remains design-dependent.

Capacity depends on design: the same annual square-centimeter figure covers different module sizes and shapes, from tiny cells to bigger geometries. The clip says the team is working on increasing capacities. It also notes that 50 million square centimeters is not a per-hour output, reinforcing that the metric is annual area rather than consumer-electronics-style millions of units.

In this short video, you can learn:
* Annual capacity is 50 million square centimeters, not an hourly device count.
* Per-hour throughput is hard to state because customizable geometries change processing time.
* Capacity depends on design, and the team is working to increase it.

📋 **Clip Abstract** The clip gives annual capacity as 50 million square centimeters for customizable inkjet OPV modules, while declining to convert that into a simple per-hour device count. It explains that tiny cells and larger geometries take different times and that capacities are being increased.

About the speaker:
* Speaker: German Soto Perez
* Company: Dracula Technologies
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#InkjetOPV, #SquareCentimeterCapacity, #CustomGeometryModules, #AnnualThroughput, #OrganicPhotovoltaics, #IoTEnergyHarvesting

06:44 - 08:59

How do five inkjet steps turn a custom organic photovoltaic prototype into a validated product for indoor IoT?

How do five inkjet steps turn a custom organic photovoltaic prototype into a validated product for indoor IoT?

The manufacturing route is broken into five stages: ink formulation tailored to client requirements, printing, encapsulation, characterization and cutting. Encapsulation is still required for indoor operation, providing protection. Because the parts serve IoT and free-shape designs, modules are printed on a large substrate and then cut into individual devices.

Inkjet printing on flexible substrates enables free design. The team tailors material selection to adjust module color and texture to application requirements. Since the devices operate indoors under different lighting types, characterization is repeated under relevant lighting conditions rather than a single reference. This design freedom is tied to the printing and substrate choice.

After prototyping, the device is incorporated into the client’s product and validated in relevant environments. Only once that validation passes does the process move to large-scale production, followed by technology integration into the customer system. The sequence links tailored ink formulation and repeat characterization to customer acceptance before volume manufacturing.

In this short video, you can learn:
* Five prototyping stages run from tailored ink formulation through printing, encapsulation, characterization and cutting.
* Inkjet printing on flexible substrates allows color and texture tailoring for free-shape IoT modules.
* Large-scale production starts only after the prototype is validated in relevant environments and accepted by the customer.

📋 **Clip Abstract** The clip details a five-stage prototyping flow for custom organic photovoltaics: ink formulation, printing, encapsulation, characterization and cutting. It explains how flexible-substrate inkjet printing enables free-shape IoT designs, with validation under relevant lighting and customer environments preceding large-scale production.

About the speaker:
* Speaker: German Soto Perez
* Company: Dracula Technologies
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#InkjetPrintedOPV, #FlexibleSubstrates, #ModuleEncapsulation, #FreeShapeCutting, #OrganicPhotovoltaics, #IndoorIoT


About this talk

→ Mass production of organic photovoltaics with inkjet printing · German Soto Perez · Perovskite Connect 2026

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page