top of page

Girish Wable

Jabil

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Girish Wable | Jabil: Can printed hybrid electronics beat rigid FR4 and flex polyimide on cost and final-product integration?

07:16 - 08:42

Other snippets from this talk

Summary of the clip:

Can printed hybrid electronics beat rigid FR4 and flex polyimide on cost and final-product integration?

Printed flexible hybrid electronics are positioned as a way to move from rigid to flexible while reducing cost, according to the talk. The industry wants thin, flexible and stretchable surfaces that consolidate the BOM, reduce weight, simplify assembly steps, and distribute sensors, power and communication over a large area. Printed electronics is presented as one route to that design freedom.

The comparison is explicit: FR4 is rigid and always needs a box around it to become a product. Flexible polyimide is a little more expensive than rigid technology and also needs a box. Printed electronics can integrate the electronics into the final product, but it is still under development and must be industrialized through hard work.

The clip then turns to applications, starting with smart packaging as an example of how flexible and printed hybrid electronics is creating market applications. It frames printed electronics as enabling electronics on everything, with thin, flexible and stretchable form factors. The remaining requirement is industrialization: the approach can allow integration and cost reduction, but the hard development work is still needed.

In this short video, you can learn:
* FR4 is rigid and requires a box around it to become a product, while flexible polyimide is more expensive than rigid technology and also needs a box.
* Printed electronics can integrate electronics into the final product and reduce cost, but it remains under development and needs industrialization.
* The industry target is thin, flexible and stretchable surfaces that consolidate the BOM, reduce weight, simplify assembly and distribute sensors, power and communication over large areas.

📋 **Clip Abstract** The clip compares printed flexible hybrid electronics with rigid FR4 and flexible polyimide on cost and integration. It says FR4 and polyimide need a box, polyimide costs more than rigid, and printed electronics can integrate into the final product but still needs industrialization.

About the speaker:
* Speaker: Girish Wable
* Company: Jabil
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#FlexibleHybridElectronics, #FR4VsPolyimide, #PrintedHybridIntegration, #SmartPackaging, #FlexibleElectronics, #PrintedElectronics

This is a highlight of the presentation:

Bringing Flexible Hybrid Electronics to the Market

Printed, Flexible, Hybrid & InMold Electronics 2021

​

10-11 March 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

11:45 - 13:39

How do repositionable printed electrodes and flexible displays expand design freedom in multi-modal wearable health patches?

How do repositionable printed electrodes and flexible displays expand design freedom in multi-modal wearable health patches?

In the next version of the platform, electrodes can be added at different places on the substrate. That placement freedom lets the same patch platform sense different modalities, and the patch no longer has to sit on one part of the body — it can move around while you adjust and accommodate the sensor location. Traditional technology imposes limitations here; printed electronics supplies the design freedom and flexibility to locate electrodes around different locations.

The platform also adds a flexible display, so instead of the reading living only on your smartphone, somebody can look at the patch itself and identify the vitals that patch is monitoring. That display can be made with many different technologies, which you can explore to enable a flexible display meeting your design requirements — flexibility, cost, readability of the fonts, power consumption.

Options are emerging in the market where you can pick and choose display technologies that meet your flexibility requirements while also matching the other design constraints — what substrate and environment the flexible display will be exposed to. The example shown creates a large array that, in this case, runs from the ankle, say, to the chest.

In this short video, you can learn:
* Moving electrodes to different positions on one substrate lets a single patch platform address multiple sensing modalities and body locations.
* A flexible display on the patch removes the smartphone as the only readout, letting someone read the monitored vitals directly off the patch.
* Display choice is a trade-off across flexibility, cost, font readability, power consumption, and the substrate and environment of exposure.

📋 **Clip Abstract** Electrode placement is decoupled from a single body location, so one printed patch platform can be reconfigured for different sensing modalities. Adding a flexible display puts the vitals on the patch itself, and emerging display options are selected against flexibility, cost, readability, power and exposure environment.

About the speaker:
* Speaker: Girish Wable
* Company: Jabil
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#PrintedElectrodes, #FlexibleDisplayIntegration, #WearableHealthPatch, #ElectrodePlacementFreedom, #FlexibleHybridElectronics, #PrintedElectronics

20:43 - 22:04

How do contract manufacturers solve joint fatigue in flexible hybrid electronics when solder is not viable?

How do contract manufacturers solve joint fatigue in flexible hybrid electronics when solder is not viable?

The approach to fatigue is application-specific, because it depends on where the product is going, its cost and its life expectancy. Solder fatigue is not the only concern; the issue is joint fatigue, since components are not always attached with solder. Conductive adhesives, films or low-temperature solder can be used instead, so the attachment method changes the fatigue problem.

Flexible hybrid electronics offers an opportunity, but development is required to address joint fatigue. The solution is case-specific rather than universal. In some cases, molding the electronics afterwards provides natural protection. In others, encapsulation or additional layers must be added to help protect the joint from fatigue. These choices depend on the product's cost and life expectancy.

Because the fatigue strategy is tied to application, there is no single answer for all products. Conductive adhesives, films and low-temperature solder are part of the toolkit, alongside molding, encapsulation and extra layers. Sustainability is also framed as an overall cost consideration. These decisions are tied to where the product goes, what it costs and how long it must last.

In this short video, you can learn:
* Joint fatigue, not only solder fatigue, must be considered because components can be attached with conductive adhesives, films or low-temperature solder.
* Molding the electronics can provide natural protection, while other cases require encapsulation or additional layers to protect the joint.
* Fatigue handling is application-specific and depends on product destination, cost and life expectancy.

📋 **Clip Abstract** Joint fatigue in flexible hybrid electronics is application-specific and depends on product destination, cost and life expectancy. Because attachment may use conductive adhesives, films or low-temperature solder instead of solder, protection can come from molding, encapsulation or additional layers.

About the speaker:
* Speaker: Girish Wable
* Company: Jabil
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#JointFatigue, #ConductiveAdhesives, #LowTemperatureSolder, #EncapsulationLayers, #FlexibleHybridElectronics, #PrintedElectronics

15:36 - 17:34

Which substrates, printing methods and materials let contract manufacturers scale flexible hybrid electronics from lab to line?

Which substrates, printing methods and materials let contract manufacturers scale flexible hybrid electronics from lab to line?

Scale-up starts with a toolkit, not a single recipe. Inside it sits a wide variety of substrates — FR4 and polyamide for conventional boards, and, most importantly for conformal work, PET, TPU, glass, paper and polycarbonate. Each option widens the application space the manufacturer can address without rebuilding its process from scratch.

On top of that sits a choice of printing technologies: screen printing, described as the very common technique, inkjet and gravure. Materials selection runs in parallel, from established options to emerging materials that contain graphene. Combining that materials and process knowledge is what feeds the design, assembly and test know-how the toolkit is built around.

That know-how is validated through process characterization, testing and validation rather than assumed. The bigger lever is adjacency: printed electronics can leverage the know-how of traditional SMT manufacturing, because many of the processes and the knowledge behind them are similar. Teams then adapt those processes based on their own research and development work.

In this short video, you can learn:
* The toolkit spans substrates from FR4 and polyamide to PET, TPU, glass, paper and polycarbonate.
* Printing options include screen, inkjet and gravure, with emerging graphene-containing materials sitting alongside established ones.
* Printed electronics reuses SMT process know-how, adapted through process characterization, testing and validation.

📋 **Clip Abstract** A contract manufacturer scales flexible hybrid electronics by pairing a broad substrate menu — FR4, polyamide, PET, TPU, glass, paper and polycarbonate — with screen, inkjet and gravure printing, and materials that extend to graphene. Design, assembly and test know-how, validated through process characterization and testing, is then adapted from traditional SMT manufacturing.

About the speaker:
* Speaker: Girish Wable
* Company: Jabil
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#FlexibleHybridElectronics, #GrapheneInks, #ScreenPrinting, #SubstrateSelection, #PrintedElectronics, #ConformalElectronics


About this talk

→ Bringing Flexible Hybrid Electronics to the Market · Girish Wable · Printed, Flexible, Hybrid, & InMold Electronics 2021


Other talks by Girish Wable

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page