top of page

Gleb Yushin

Sila Nanotechnology

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Gleb Yushin | Sila Nanotechnology: Can a drop-in silicon anode hit 1,800 mAh/g, 6 mAh/cm², 1,200 cycles and 15-minute charging?

07:04 - 09:34

Other snippets from this talk

Summary of the clip:

Can a drop-in silicon anode hit 1,800 mAh/g, 6 mAh/cm², 1,200 cycles and 15-minute charging?

Prismatic and pouch cells can reach 100, 120 or larger ampere-hour capacities. Internal development uses coin cells, small pouch cells and stacked pouch cells. The silicon material offers 1,500 to 1,800 milliampere-hour per gram of active material, with a dense anode coating and formation comparable to graphite. Areal capacity is typically 3 to 4 for consumer cells and 4 to 6 for automotive cells, serving as a drop-in graphite replacement.

Internal automotive cells and prototypes exceed 1,200 cycles against NCM811, while partner large-scale automotive cells above 40 ampere-hours show similar, sometimes better, performance. Fast charging reaches 10 to 80% state of charge in 20 minutes internally; partners achieve sometimes 15 minutes or shorter at the same charging state. All anodes are water-based.

Fast discharge supports high power performance for fast acceleration, and the cells meet automotive partner performance specifications. Commercial consumer cells produced by professional companies offer high energy density and 800-cycle life. These are built with LCO cathodes and tested all the way to 4.4.

In this short video, you can learn:
* The silicon anode material offers 1,500–1,800 mAh/g of active material, with 3–4 mAh/cm² areal capacity in consumer cells and 4–6 mAh/cm² in automotive cells.
* Internal automotive prototypes exceed 1,200 cycles against NCM811, and partner large-scale cells above 40 Ah show similar or sometimes better cycling.
* Fast charging reaches 10–80% state of charge in 20 minutes internally and sometimes 15 minutes or shorter with partners, while commercial LCO consumer cells reach 800 cycles to 4.4.

📋 **Clip Abstract** The clip quantifies a drop-in silicon anode at 1,500–1,800 mAh/g with 3–4 mAh/cm² consumer and 4–6 mAh/cm² automotive areal capacity. It reports over 1,200 automotive cycles against NCM811, 20-minute internal and sometimes 15-minute partner 10–80% charging, plus commercial LCO consumer cells at 800 cycles to 4.4.

About the speaker:
* Speaker: Gleb Yushin
* Company: Sila Nanotechnology
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconAnode, #ArealCapacity, #NCM811Cycling, #WaterBasedAnode, #LithiumIonBatteries, #BatteryMaterials

This is a highlight of the presentation:

Sila’s Drop-In Silicon Anode Technology for a Sustainable Future

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

02:23 - 03:18

How can a drop-in silicon anode add over 20% energy density without stranding $200 billion in existing battery factories?

How can a drop-in silicon anode add over 20% energy density without stranding $200 billion in existing battery factories?

Broader work on revolutionary battery technologies and conversion-type chemistries sets new performance limits, with claims of up to three times lighter and two times smaller batteries, plus significantly lower cost. The first product described is a silicon-based anode material that raises energy density by more than 20%, on top of the few percent available from cathode or cell-level improvements.

The defining feature is drop-in compatibility with existing lithium-ion battery factories, making the material compatible with past, present, and planned plants. That matters because there is more than $200 billion committed to these battery factories. A drop-in anode avoids stranding that capital while adding over 20% energy density, and it lets the same material route serve factories already built and those yet to be built.

Economic scale is treated as a material-design constraint, not an afterthought. The anode is manufacturable economically at global scale because it uses only low-cost commodity precursors. That precursor choice supports the drop-in manufacturing proposition: the material must fit existing lithium-ion factories and still deliver over 20% energy-density gain. The combination of low-cost inputs, compatibility, and additive cell-level improvement is the commercial case described.

In this short video, you can learn:
* The first product described is a silicon-based anode material that increases energy density by more than 20%, additive to a few percent from cathode or cell-level improvements.
* Its drop-in compatibility spans past, present, and planned lithium-ion factories, protecting more than $200 billion in committed factory investment.
* The material is designed for economical global-scale manufacturing using only low-cost commodity precursors.

📋 **Clip Abstract** A first product described is a silicon-based anode material that increases energy density by more than 20% on top of a few percent from cathode or cell-level improvements. Its drop-in compatibility with existing and planned lithium-ion factories protects more than $200 billion in committed capacity, while low-cost commodity precursors support economical global-scale manufacturing.

About the speaker:
* Speaker: Gleb Yushin
* Company: Sila Nanotechnology
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconAnodeMaterial, #DropInCompatibility, #EnergyDensityGain, #CommodityPrecursors, #LithiumIonBatteries, #BatteryMaterials

00:02:51.265 - 00:03:43.205

How do you pack 10x more energy into an anode without it self-destructing?

How do you pack 10x more energy into an anode without it self-destructing?

The fundamental challenge with using pure silicon as an anode material is its massive volume expansion. While silicon can store significantly more lithium than traditional graphite, it swells by approximately 300% during charging. This compares to a mere 7% expansion for graphite, and this immense mechanical stress typically causes the anode to pulverize and degrade rapidly, leading to poor cycle life.

Sila's core innovation is a composite material designed to tame this destructive swelling. The technology embeds active silicon nanoparticles within a rigid, porous carbon scaffold matrix. This engineered nano-architecture creates a structure where the silicon is contained within a protective and conductive framework, but with enough internal void space to manage its expansion.

As the battery charges and lithium ions enter the silicon, the nanoparticles expand into the engineered pores within the carbon matrix. This internal expansion occurs without changing the overall external dimensions of the composite particle. As a result, the anode maintains its structural integrity throughout charging and discharging, enabling the high energy density and fast-charging capabilities of silicon while retaining the critical safety and cycle stability characteristic of graphite.

In this short video, you can learn:
* The fundamental challenge of silicon anode swelling (300% vs. 7% for graphite).
* The engineered nano-architecture of Sila's silicon-carbon composite.
* How a porous carbon scaffold enables stable cycling by accommodating silicon's volume expansion.
📋 **Clip Abstract** Gleb Yushin explains the core innovation behind Sila's stable silicon anode technology. The material's unique nano-architecture embeds silicon nanoparticles within a porous carbon scaffold, allowing the silicon to expand and contract without damaging the anode structure.
🔗 Link in comments 👇

#SiliconAnode, #CarbonScaffold, #NanoArchitecture, #VolumeExpansionManagement, #AdvancedAnodeMaterials, #LithiumIonBatteries

18:14 - 20:15

Why do raw materials, not processing, dominate silicon-anode cost—and how does higher energy density cut cell-level costs?

Why do raw materials, not processing, dominate silicon-anode cost—and how does higher energy density cut cell-level costs?

At the start, processing looked like the cost problem: several production steps appeared expensive at early stages, and the team expected production cost to be substantial. At large scale the picture inverted. Cost is mostly limited by raw materials, not by the process. That is why selecting low-cost raw-material precursors matters so much—and why the outcome mirrors other industries that become materials-cost driven at volume.

Polysilicon made for the solar industry costs roughly $5 to $7 per kilogram in China; cell-level material can be $12 or more. Even so, that price is acceptable for silicon anodes because silicon's capacity is about ten times higher than graphite's. At scale, the material-level economics become cost competitive well before any cell-level benefit is counted.

The larger lever is energy density. Replacing only a small component of the cell still raises energy density, and a higher-energy-density cell costs less to produce per kilowatt hour: you need fewer cells, and each uses less inactive material—less separator, less electrolyte, less binder, fewer current-collector foils. Savings then repeat at battery level, where a pack with fewer cells is cheaper.

In this short video, you can learn:
* At large scale, raw-material precursors—not processing steps—limit anode cost, which is why low-cost precursor selection is decisive.
* Solar-grade polysilicon at roughly $5–7/kg in China (cell material $12+) is acceptable because silicon's capacity is about ten times graphite's.
* Higher energy density cuts cost per kilowatt hour by reducing cell count and the separator, electrolyte, binder and foil consumed per cell, with further savings at pack level.

📋 **Clip Abstract** Cost in a scaled silicon anode is set by raw materials rather than processing, making low-cost precursors the key lever; solar-grade polysilicon at $5–7/kg is workable given silicon's roughly tenfold capacity advantage over graphite. The bigger saving comes from energy density: fewer cells, less separator, electrolyte, binder and foil per kilowatt hour, and fewer cells per pack.

About the speaker:
* Speaker: Gleb Yushin
* Company: Sila Nanotechnology
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#SiliconAnodeCost, #SolarGradePolysilicon, #GravimetricCapacity, #InactiveMaterialReduction, #BatteryMaterials, #LithiumIonCells


About this talk

→ Sila’s Drop-In Silicon Anode Technology for a Sustainable Future · Gleb Yushin · Battery Materials: Next-Gen & Beyond Lithium Ion 2022


Other talks by Gleb Yushin


More highlights from Gleb Yushin

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page