top of page

Gregory Hitz

ION Storage Systems

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Gregory Hitz | ION Storage Systems: Why does sealing the anode let you use non-flammable catholytes without gelling them?

10:05 - 11:31

Other snippets from this talk

Summary of the clip:

Why does sealing the anode let you use non-flammable catholytes without gelling them?

In a planar configuration, an ionically conductive liquid catholyte must be gelled to keep it from crossing into the anode. That gelling step is an added difficulty and both an engineering and a scientific challenge; they have tried it and it is hard. This is the baseline the sealed-anode approach avoids.

Because the anode has a static dimension, it can be sealed and a liquid of any chosen catholyte applied, including advanced catholytes. Since these catholytes do not touch the anode, they do not need to be stable to anode potentials. That enables cathode flexibility and selection of higher-performance, non-flammable, lower-cost electrolyte materials.

Pack integration changes too. The cells unlock applications that cannot accommodate engineered packs; a competitor's low pressure of 3 atmospheres still means 200 pounds of force on a cell phone battery, which will not be integrated into a phone. The approach does not require that, and EV pack integration avoids compression, fire barriers and cooling for simpler integration.

In this short video, you can learn:
* Gelling catholyte in planar cells is an added engineering and scientific challenge that was hard when tried.
* Sealing the anode allows any liquid catholyte, including advanced non-flammable lower-cost materials, because it does not touch the anode or need anode-potential stability.
* The no-compression design avoids 3-atmosphere/200-pound forces and simplifies EV pack integration by removing compression, fire barriers and cooling.

đź“‹ **Clip Abstract** Sealing a static anode dimension allows a liquid catholyte of choice, including advanced non-flammable, lower-cost materials, without gelling because the catholyte does not contact the anode or need anode-potential stability. This removes compression and pack-engineering burdens, enabling cell-phone-like applications and simpler EV pack integration without fire barriers or cooling.

About the speaker:
* Speaker: Gregory Hitz
* Company: ION Storage Systems
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#CatholyteGelling, #SealedAnode, #AnodePotentialStability, #CompressionFreePack, #SolidStateBatteries, #BatteryPackIntegration

This is a highlight of the presentation:

The multilayer approach to solid-state battery electrolytes - Transforming traditional battery architecture

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

15:02 - 16:27

Where does a 40% solid-state cost saving actually come from, and does the math hold up?

Where does a 40% solid-state cost saving actually come from, and does the math hold up?

The cost case begins with a Bloomberg New Energy Finance projection that solid-state cells and packs could be about 40% cheaper. Internal modeling fact-checks that number: the ceramic separator will never match a cell guard’s stretched plastic on price, and it adds roughly 10% to cell cost. That 10% estimate rests on 2021 prices and is already rising.

The offset comes from what the separator unlocks: higher-energy-density next-generation electrodes and lower-cost cathode materials, which also ease sourcing concerns. A lithium-free anode removes graphite, a material that costs almost nothing but still costs something. At pack level, no cooling system is needed, and a smaller, easier-to-integrate pack adds further cost advantages.

Combining those effects produces numbers similar to Bloomberg’s projection, according to the internal modeling. But technology is only part of the problem: a great technology can succeed or fail. Much depends on solving for rapid, so the cost math alone does not guarantee commercial success.

In this short video, you can learn:
* The ceramic separator adds about 10% to cell cost versus a stretched-plastic cell guard.
* Higher-energy-density electrodes and lower-cost cathodes offset that separator penalty while easing sourcing.
* No cooling system and a smaller, easier-to-integrate pack create pack-level savings.

📋 **Clip Abstract** Internal modeling broadly matches Bloomberg New Energy Finance’s projection that solid-state cells and packs could be about 40% cheaper. The savings come from next-generation electrodes, lower-cost cathodes, a lithium-free anode and pack-level simplifications, despite a ceramic separator that adds roughly 10% to cell cost on 2021 prices.

About the speaker:
* Speaker: Gregory Hitz
* Company: ION Storage Systems
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#CeramicSeparator, #LithiumFreeAnode, #NextGenerationCathodes, #PackLevelSavings, #SolidStateBatteries, #BatteryMaterials

07:41 - 09:52

How does a 50-times-surface-area porous ceramic support a thin dense separator and eliminate cell volume change?

How does a 50-times-surface-area porous ceramic support a thin dense separator and eliminate cell volume change?

The electrolyte is a multilayer ceramic structure: one ionically conductive ceramic used in both a dense layer and a porous layer. The dense layer is very thin because the porous layer mechanically supports it, and that porous layer delivers about 50 times the surface area of a planar surface. Since electrode–electrolyte interfaces are a primary solid-state challenge, that 50-fold area moves ions through the interface 50 times faster.

A lithium metal anode plates into those pores and strips back out of them. It is a high-loading anode: all of that capacity sits inside the ionically conductive, percolating network, so the lithium is accessed easily and quickly, and without compression. Because cycling happens within the pores, there is no external volume change — a critical factor for the cell and its integration.

The result is a static cell dimension, whereas the competing solid-state strategy plates lithium on a planar surface, causing expansion and requiring compression. The cell also takes conventional cathode foils — aluminum foil coated with cathode material — and at the university it was tested with every possible cathode, making it a platform for whichever cathode is desired.

In this short video, you can learn:
* Using the same ionically conductive ceramic for both layers keeps the dense separator thin, because the porous layer supplies the mechanical support.
* The porous layer's 50-times-planar surface area lets ions cross the electrode–electrolyte interface roughly 50 times faster.
* Plating and stripping lithium inside the pores gives a static cell dimension, avoiding the expansion and compression that planar plating demands.

đź“‹ **Clip Abstract** A multilayer ceramic electrolyte pairs a very thin dense layer with a high-surface-area porous layer made of the same ionically conductive ceramic. Lithium plates and strips inside the pores, delivering a high-loading anode, no external volume change and compatibility with conventional cathode foils.

About the speaker:
* Speaker: Gregory Hitz
* Company: ION Storage Systems
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#MultilayerCeramicElectrolyte, #PorousCeramicScaffold, #LithiumMetalAnode, #CathodeFoilIntegration, #SolidStateBatteries, #EnergyStorageMaterials


About this talk

→ The multilayer approach to solid-state battery electrolytes - Transforming traditional battery architecture · Gregory Hitz · Battery Materials: Next-Gen & Beyond Lithium Ion 2022

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page