Mr. Hidehiro Yoshida | Panasonic Production Engineering Co.,Ltd.: Why is 10% volume variation unacceptable for displays, and how can individual nozzle voltage tuning fix it?
07:45 - 09:00
Other snippets from this talk
Summary of the clip:
Why is 10% volume variation unacceptable for displays, and how can individual nozzle voltage tuning fix it?
Mr. Yoshida details the critical engineering required to achieve the uniform deposition necessary for commercial display fabrication. Standard inkjet printheads exhibit volume variations between 5% and 10% across the nozzle array, which leads to visible luminance non-uniformity (mura) in quantum dot and OLED displays.
To overcome this limitation, Panasonic developed specialized driver circuit boards capable of tuning the drive voltage waveform of each individual nozzle. This precise calibration corrects localized dispensing variations, shrinking the total volume variation across the entire printhead to less than 3%.
Furthermore, this systemic optimization of the head and driver electronics yields an exceptional droplet landing accuracy of approximately 1.1 microns. This spatial precision is a key requirement for high-resolution panels, enabling the production of dense, high-PPI pixel layouts.
In this short video, you can learn:
* The impact of printhead volume variation on display quality and defect generation.
* Active calibration of individual nozzle volumes using customized driver electronics.
* Achieving sub-1.5 micron landing accuracy for next-generation pixel architectures.
📋 **Clip Abstract** This clip demonstrates how Panasonic addresses the challenges of nozzle-to-nozzle volume non-uniformity in industrial printheads. By implementing per-nozzle voltage tuning, they reduced volume variation to under 3% and achieved a landing accuracy of 1.1 microns.
#NozzleVoltageTuning, #DropletLandingAccuracy, #MuraMitigation, #InkjetPrintedDisplays, #PrintedElectronics, #HighPPIDisplays
This is a highlight of the presentation:
High resolution inkjet printing technology for QD color converter on Micro LED
More Highlights from the same talk.
03:25 - 04:59
How do you print high-density titanium oxide in quantum dot inks without instant nozzle clogging?
How do you print high-density titanium oxide in quantum dot inks without instant nozzle clogging?
In this segment, Mr. Hidehiro Yoshida discusses the formulation challenges of Quantum Dot Color Conversion (QDCC) inks, specifically focusing on the integration of quantum dots with high-density titanium oxide (TiO2). Unlike stable quantum dots, heavy TiO2 particles settle rapidly out of suspension, causing severe nozzle clogging and jetting instability.
To mitigate particle sedimentation, Panasonic engineers utilized the Stokes equation to determine that high-viscosity inks are necessary to slow down particle settling velocities. However, jetting high-viscosity inks requires substantially higher actuation power, which feeds back into the printhead as mechanical vibration and fluidic instability across the nozzle array.
To resolve this, the design team implemented internal restrictor structures within the microfluidic channels of the printhead, dampening the fluidic cross-talk and preventing systemic vibrations.
In this short video, you can learn:
* The physics of sedimentation in QDCC inks containing heavy TiO2 scattering particles.
* Applying the Stokes equation to balance ink viscosity against particle settling velocity.
* Microfluidic printhead design strategies using restrictor structures to handle high-power, high-viscosity jetting.
📋 **Clip Abstract** This clip highlights the engineering trade-offs required to jet highly dense QDCC inks containing TiO2. It explains how Panasonic uses high-viscosity formulations and internal microfluidic restrictors to prevent particle sedimentation while protecting the printhead from destructive acoustic crosstalk.
#QuantumDotColorConversion, #TiO2Sedimentation, #MicrofluidicRestrictors, #HighViscosityJetting, #MicroLEDDisplays, #PrintedElectronics
12:35 - 14:15
Why does conventional inkjet printing hit a physical wall at 500 PPI, and how does electrohydrodynamics solve it?
Why does conventional inkjet printing hit a physical wall at 500 PPI, and how does electrohydrodynamics solve it?
The speaker addresses the fundamental physical limitations of traditional piezoelectric inkjet technology when scaling down to sub-picoliter droplet volumes. As droplet volumes shrink toward 0.1 picoliters to target resolutions beyond 500 PPI, the droplets lack the momentum to overcome environmental disturbances like micro-drafts and ambient airflow.
To break past this barrier, Panasonic is developing Electrohydrodynamic (EHD) jetting technology. EHD utilizes an intense electric field generated between the printhead nozzle and the substrate to pull sub-picoliter droplets directly from the meniscus, bypassing traditional acoustic limits.
While EHD is typically operated in continuous-jet mode, Panasonic's approach utilizes a pulsed voltage mode to achieve discrete, drop-on-demand printing. This capability opens the path to manufacturing ultra-high-resolution displays exceeding 1,000 PPI.
In this short video, you can learn:
* The physical aerodynamic limits of 0.1 pL droplets in ambient atmospheres.
* Principles of Electrohydrodynamic (EHD) jetting for sub-picoliter droplet generation.
* Implementing pulse-mode EHD to scale display resolution beyond 1,000 PPI.
📋 **Clip Abstract** This clip explains why standard inkjet fails at sub-picoliter scales due to atmospheric drift and introduces Electrohydrodynamic (EHD) jetting as the successor technology. It outlines how pulsed-mode EHD can overcome physical acoustic limits to enable display printing at resolutions over 1,000 PPI.
#ElectrohydrodynamicJetting, #PulsedModeEHD, #SubPicoliterDroplets, #HighPPIDisplays, #PrintedElectronics, #MicroLEDManufacturing
Links to this speaker's talk page and other highlights appear here.