top of page

Jacqueline Putz

Henkel

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Jacqueline Putz | Henkel: Carbon, silver or copper: which conductive filler earns its chemistry — and what does each cost you in extra process steps?

10:59 - 12:25

Other snippets from this talk

Summary of the clip:

Carbon, silver or copper: which conductive filler earns its chemistry — and what does each cost you in extra process steps?

Carbon pigments come in cheaper than silver — "who would have guessed" — and they are chemically stable, so they do not oxidize; that stability is called the real beauty of carbon inks. After drying, the ink becomes rather stiff, but very highly conductive. The trade-off is paid in chemistry rather than in extra process steps.

Silver delivers the highest conductivity among standard fillers. Gold would work, but the costs get crazy, so silver tends to be the choice. Its oxidation is slow, and silver oxide is still conductive, unlike copper oxide — the track does not lose conduction as it ages. That chemistry is the reason silver stays the default.

Copper oxidizes very easily, and copper oxide is non-conductive — not necessarily a drawback, but something to design around. Copper needs an additional sintering step so the particles really merge into each other and the ink conducts. That extra processing step is the price, so which filler wins depends on your process and final application.

A filler-by-filler comparison of carbon, silver and copper conductive inks, weighing cost, oxide chemistry and process burden. Carbon wins on stability, silver on conductivity, and copper only with an added sintering step — the choice is set by the process and the final application.

In this short video, you can learn:
* Carbon pigments undercut silver on cost and stay chemically stable because they do not oxidize.
* Silver gives the highest conductivity of the standard fillers, and its slowly formed oxide remains conductive, whereas gold is ruled out by cost.
* Copper oxidizes easily to a non-conductive oxide and requires an additional sintering step to merge the particles before it conducts.

📋 **Clip Abstract** A filler-by-filler comparison of carbon, silver and copper conductive inks, weighing cost, oxide chemistry and process burden. Carbon wins on stability, silver on conductivity, and copper only once an extra sintering step is added — the choice is set by the process and the final application.

About the speaker:
* Speaker: Jacqueline Putz
* Company: Henkel
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#CarbonPigmentInk, #SilverFiller, #CopperSintering, #ConductiveInkFormulation, #PrintedElectronics, #AdditiveElectronics

This is a highlight of the presentation:

Electrically Conductive Inks - Formulation, Printing and Applications

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

07:44 - 09:52

What four components determine whether a conductive ink can be printed, cured and survive in the field?

What four components determine whether a conductive ink can be printed, cured and survive in the field?

The first and most important ink component is the conductive pigment: silver, silver chloride, copper or carbon, sometimes insulating pigments. These pigments provide the ink’s main functionality, conductivity, and enable electrodes or antennas. The binder or resin embeds them; binders can be thermoplastic, thermoset or UV curable.

UV-curable binders are typically used for dielectric inks, while silver and carbon inks are thermoplastic or thermosetting. Thermosetting inks undergo a cross-linking reaction and remain stable at very high temperatures, up to 250 degrees. The binder also delivers adhesion, cohesion and much of the ink’s flexibility.

A carrier medium, usually solvent, dissolves the other formulation parts and makes the ink processable; one or two water-based inks exist for market need, but the general trend remains solvent-based. Additives enhance the mentioned properties. Components alone are not unique: the supplier’s expertise is choosing combinations that fine-tune performance, cost and field reliability.

In this short video, you can learn:
* Conductive pigments—silver, silver chloride, copper or carbon—supply conductivity and enable electrodes and antennas.
* Thermosetting binders cross-link for stability up to 250 degrees and provide adhesion, cohesion and flexibility.
* Solvent carriers dominate, water-based inks meet selected needs, and additives plus formulation expertise tune performance, cost and reliability.

📋 **Clip Abstract** The formulation separates into conductive pigments, a thermoplastic, thermoset or UV-curable binder, a carrier medium and additives. Each part controls conductivity, cure stability, processability, adhesion and field reliability, with supplier expertise combining them.

About the speaker:
* Speaker: Jacqueline Putz
* Company: Henkel
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#ConductiveInkFormulation, #SilverPigmentInks, #ThermosettingBinders, #SolventCarrierInks, #PrintedElectronics, #AdditiveElectronics

23:40 - 25:03

Screen versus rotary gravure: how do print speed and dry film thickness trade off?

Screen versus rotary gravure: how do print speed and dry film thickness trade off?

The process overview for flat substrates separates flatbed screen printing from rotary screen printing, where the screen sits on a roll rather than being flat, and groups flexography with rotary gravure as high-speed printing processes. Printing speed and printed dry film thickness are shown together, making the thickness-versus-throughput trade-off visible across these processes.

Flatbed screen printing runs at a typical 30 to 80 meters per minute and deposits relatively high ink thickness. Silver inks are typically printed at five micrometers, while dielectrics are printed thicker, around 25 micrometers, to achieve optimal dielectric properties and insulation.

Rotary gravure is much faster, at 300 to 600 meters per minute, and it prints only a very low thickness according to the comparison. Flexography is named among the high-speed processes, but the clip gives no separate speed or thickness figures for it.

In this short video, you can learn:
* Flatbed screen printing typically runs at 30 to 80 meters per minute with silver inks at five micrometers and dielectrics around 25 micrometers.
* Rotary gravure is a high-speed process at 300 to 600 meters per minute and prints only a very low thickness.
* Rotary screen printing uses a roll-mounted screen rather than a flat screen, while flexography and rotary gravure are grouped as high-speed processes.

📋 **Clip Abstract** The clip compares flatbed and rotary screen printing with high-speed flexography and rotary gravure for flat substrates, plotting print speed against printed dry film thickness. Screen printing runs at 30 to 80 meters per minute with silver at five micrometers and dielectrics around 25 micrometers, while rotary gravure reaches 300 to 600 meters per minute at very low thickness.

About the speaker:
* Speaker: Jacqueline Putz
* Company: Henkel
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#FlatbedScreenPrinting, #RotaryScreenPrinting, #RotaryGravure, #DryFilmThickness, #PrintedElectronics, #ConductiveInks

13:31 - 15:17

Why does resistance collapse at a specific filler loading, and why not simply add more silver?

Why does resistance collapse at a specific filler loading, and why not simply add more silver?

At low filler content, conductive pigments are sparse in the solvent or resin, so resistance stays high. As filler content increases, pigments come closer; when they touch, they form a conductive path inside the ink and resistance drops rapidly. This percolation threshold is central to formulating a highly conductive ink with low resistance.

Adding more silver beyond that point does not change resistance much, but it raises ink price because there is even more silver. The target is therefore not maximum filler loading: it is a point with very low resistance and good filler content in terms of price and ink manufacturing.

Formulation has to find the optimum balance between low resistance, ink performance and cost, which matters to customers. Sometimes different pigment sizes are blended. The graph contrasts sparse pigments at high resistance with touching pigments that create a conductive path, then shows the flattening resistance as filler content continues to rise.

In this short video, you can learn:
* Resistance falls rapidly once conductive pigments touch and form a conductive path at the percolation threshold.
* Increasing filler content beyond that point changes resistance little but raises ink price due to more silver.
* The formulation target is an optimum balance of low resistance, ink performance and cost, sometimes using blended pigment sizes.

📋 **Clip Abstract** Conductive inks need enough pigment to reach a percolation threshold where touching particles form a conductive path and resistance drops rapidly. Beyond that point, extra silver buys little resistance improvement but raises cost, so formulation targets an optimum balance of low resistance, ink performance, price and manufacturing, sometimes by blending pigment sizes.

About the speaker:
* Speaker: Jacqueline Putz
* Company: Henkel
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#ConductiveInks, #PercolationThreshold, #SilverFiller, #PigmentSizeBlending, #PrintedElectronics, #AdditiveElectronics

Links to this speaker's talk page and other highlights appear here.

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page