top of page

Kai Keller

Notion Systems

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Kai Keller | Notion Systems: Why is perovskite inkjet throughput a production-scale problem, not just print stability?

33:55 - 34:46

Other snippets from this talk

Summary of the clip:

Why is perovskite inkjet throughput a production-scale problem, not just print stability?

The clip contrasts print stability with scaling into production. Stability still requires work, but once achieved the process is described as “from there, it’s the same.” The decisive difference is throughput: perovskite solar-cell production, including tandem perovskite-on-solar-cell formats, is discussed in thousands of solar wafers per hour.

For those solar-cell systems, the stated throughput range is 2,000, 4,000 and 8,000 wafers per hour—solar wafers per hour. That is not the same order as the semiconductor wafer tools referenced. Those systems are described at 60 to 100 wafers per hour. The contrast is therefore a production-throughput contrast between solar wafers and semiconductor wafers.

Print stability is still work, but the passage frames it as separate from the production-scale distinction. The production-scale distinction is the wafer-per-hour number: 2,000, 4,000 or 8,000 solar wafers per hour for perovskite solar cells, versus 60 to 100 semiconductor wafers per hour for the systems shown. That is the throughput problem.

In this short video, you can learn:
* Print stability requires work, but once achieved the process is described as “from there, it’s the same.”
* Perovskite solar-cell production, including tandem perovskite-on-solar-cell formats, is quoted at 2,000, 4,000 or 8,000 solar wafers per hour.
* The semiconductor wafer systems referenced run at 60 to 100 wafers per hour, which is explicitly different from the solar-wafer throughput.

📋 **Clip Abstract** The clip contrasts print stability with production throughput for perovskite inkjet. It cites 2,000–8,000 solar wafers per hour for perovskite solar cells, including tandem formats, against 60–100 wafers per hour for the semiconductor wafer systems shown.

About the speaker:
* Speaker: Kai Keller
* Company: Notion Systems
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#PerovskiteInkjet, #SolarWaferThroughput, #TandemPerovskite, #SemiconductorWaferTools, #PrintedElectronics, #FunctionalInkjet

This is a highlight of the presentation:

Inkjet Printing of Functional Materials: Understanding the new tool in the box of Semiconductor Manufacturing

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

12:24 - 13:19

Why can't printheads with ±10% drop variation meet display MURA specs of ±1%?

Why can't printheads with ±10% drop variation meet display MURA specs of ±1%?

Display requirements are unforgiving: pixel-to-pixel volume variations must stay below plus/minus 1% to avoid visible defects such as MURA. Any deviation at that level becomes something the eye can detect on the display. That is the tolerance the printing process has to work within, and it is set by what the viewer can see.

Against that, typical printhead manufacturers' spec sheets state drop-to-drop variations that can easily reach plus/minus 10%. So there is a mismatch — a tenfold gap between what the display demands and what the printhead datasheet offers. The head alone cannot deliver the spec, so the process has to compensate for it.

The answer is drop volume tuning — deliberately adjusting the drop volume so the printed result lands inside the display tolerance. That tuning is one item in what the speaker calls the NO MURA toolbox. Printing RGB pixels onto a display then becomes a question of actively managing that variation instead of accepting the printhead's raw specification.

In this short video, you can learn:
* Display MURA specs call for pixel-to-pixel volume variation below plus/minus 1%.
* Typical printhead spec sheets allow drop-to-drop variation of plus/minus 10%, a tenfold mismatch.
* Drop volume tuning, one item in the NO MURA toolbox, is the route to closing that gap when printing RGB pixels.

📋 **Clip Abstract** The clip sets a display tolerance of ±1% pixel-to-pixel volume variation against printhead specs of ±10% drop-to-drop variation, and names the mismatch directly. Drop volume tuning, part of the NO MURA toolbox, is presented as the way to close it when printing RGB pixels.

About the speaker:
* Speaker: Kai Keller
* Company: Notion Systems
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#DropVolumeTuning, #NoMuraToolbox, #PixelVolumeVariation, #PrintheadDropVariation, #InkjetPrinting, #DisplayManufacturing

18:49 - 19:55

Can inkjet print standard semiconductor resists to the same critical dimension while cutting spin-coating waste by 90%?

Can inkjet print standard semiconductor resists to the same critical dimension while cutting spin-coating waste by 90%?

Replacing spin coating is one very prominent application, and it becomes especially interesting as substrates get larger. The approach is simply to print standard resists taken directly from semiconductor manufacturing, rather than formulating something bespoke for the deposition tool. That substrate-size scaling argument is what moves the discussion from a lab curiosity toward a genuine manufacturing option.

Expanding the viscosity window is the enabling advantage here. Because the tool can handle standard industry resists, they can be applied in a different way instead of being re-engineered. Anyone familiar with spin coating knows roughly 90% of the material is thrown away. If the material is cheap that may not matter, but as resist costs rise, discarding 90% becomes expensive.

The claimed outcome is parity, not compromise: the same final results and the same final critical dimension, achieved while applying standard lacquers from semiconductor manufacturing. That is the commercial argument, because a deposition change only survives if the printed feature matches the spun reference. Waste reduction counts for little if the dimension shifts, so equivalent critical dimension is the metric that matters.

In this short video, you can learn:
* Spin coating is identified as one of the most prominent processes that inkjet printing can replace, with the case strengthening as substrate sizes increase.
* Spin coating discards roughly 90% of the material, which is tolerable for cheap resists but becomes costly as material prices rise.
* Printing standard semiconductor resists is claimed to deliver the same final results and the same final critical dimension as the incumbent process.

📋 **Clip Abstract** Printing standard semiconductor resists by inkjet is positioned as a route to replacing spin coating, particularly as substrates grow larger. The expanded viscosity window lets industry-standard resists be applied differently while reaching the same final critical dimension, avoiding the roughly 90% material waste typical of spin coating.

About the speaker:
* Speaker: Kai Keller
* Company: Notion Systems
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#InkjetResistPrinting, #SpinCoatingReplacement, #HighViscosityInkjet, #CriticalDimension, #PrintedElectronics, #SemiconductorManufacturing

15:00 - 16:12

How do you tune 3 pL drops to ±1% volume across a production printhead?

How do you tune 3 pL drops to ±1% volume across a production printhead?

Drop volume tuning is one tool in the box. Measuring drop volume over the number of nozzles for a given ink and printhead can easily look like the first curve. For high-accuracy, high-resolution displays, the target was a three picoliter droplet, shown at zero.

Using electronics and process development called drop volume tuning, the variation in droplet volumes was reduced. It is the same curve and the same nozzles, but with much lower variation in drop volume. You cannot put it to zero, but the reduction was considerable.

The result was getting into a range to achieve plus/minus 1% volume accuracy in the drops. The target was a three picoliter droplet for high-accuracy, high-resolution displays, and the tuned curve reduced variation across the nozzles.

In this short video, you can learn:
* Drop volume tuning reduced droplet-volume variation across the same nozzles and the same measured curve.
* The application target was a three picoliter droplet for high-accuracy, high-resolution displays.
* The tuned process achieved plus/minus 1% volume accuracy in the drops, though not zero variation.

📋 **Clip Abstract** Drop volume tuning uses electronics and process development to reduce droplet-volume variation for a given ink and printhead. For a three picoliter target aimed at high-accuracy, high-resolution displays, the result was plus/minus 1% volume accuracy in the drops.

About the speaker:
* Speaker: Kai Keller
* Company: Notion Systems
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#DropVolumeTuning, #PicoliterDroplets, #PrintheadNozzles, #VolumeAccuracy, #PrintedElectronics, #SemiconductorManufacturing


Other talks by Kai Keller


More highlights from Kai Keller

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page