Karl Forbes | XAAR: Does higher viscosity force you to sacrifice throughput, throw distance or barcode grade?
14:49 - 15:39
Other snippets from this talk
Summary of the clip:
Does higher viscosity force you to sacrifice throughput, throw distance or barcode grade?
Jetting a 60 centipoise water-based fluid with high pigment content produced a 10-micron film at 250 metres per minute, with a throw distance of about three millimetres. The argument is that moving to higher viscosity does not require sacrificing productivity, unlike other high-viscosity deposition techniques.
At 100 metres per minute and a 10-millimetre throw distance, the process still produced a grade four barcode on uncoated media. That combination is described as pretty unheard of, linking slower speed and longer throw to maintained barcode quality rather than loss of print performance.
The clip contrasts theory and challenges in jetting high-viscosity fluids with demonstrated deposition results: higher viscosity, high pigment loading, short and long throw, and barcode grade. It also notes that printhead integration support exists, but the core claim is that productivity need not be traded away for viscosity.
In this short video, you can learn:
* A 60 centipoise water-based, high-pigment fluid was jetted as a 10-micron film at 250 metres per minute with roughly three millimetres throw.
* At 100 metres per minute and a 10-millimetre throw distance, the process still achieved a grade four barcode on uncoated media.
* Higher viscosity did not force a productivity sacrifice in the demonstrated inkjet deposition.
π **Clip Abstract** The clip shows high-viscosity inkjet depositing a 60 centipoise, high-pigment water-based fluid as a 10-micron film at 250 metres per minute and about three millimetres throw. It also demonstrates a grade four barcode on uncoated media at 100 metres per minute with a 10-millimetre throw distance, arguing that higher viscosity need not sacrifice productivity.
About the speaker:
* Speaker: Karl Forbes
* Company: XAAR
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#HighViscosityInkjet, #GradeFourBarcode, #TenMicronFilm, #LongThrowDistance, #PrintedElectronics, #AdditiveElectronics
This is a highlight of the presentation:
Beyond Low-Viscosity Limits: Rethinking Inkjet for Production Electronics Manufacturing
More Highlights from the same talk.
03:45 - 05:18
Why does jetting at 100 centipoise instead of 10 change formulation freedom, dot control and porous-substrate penetration?
Why does jetting at 100 centipoise instead of 10 change formulation freedom, dot control and porous-substrate penetration?
Typical inkjet printheads run 3 to 5 centipoise, some water-based heads perhaps 10 centipoise, and other high-productivity heads up to 30 centipoise. The platform can print 100 centipoise at jetting conditions, influenced by temperature or non-Newtonian fluids. If the fluid is up to 1,000 centipoise at room temperature, it may be jettable.
Increased viscosity gives significantly more functionality in the fluid, because it can be diluted much less than at 10 centipoise. A more viscous fluid also makes droplet spread easier to control when it lands on the substrate. These are the formulation and dot-control benefits of higher-viscosity jetting.
Printing onto porous media, such as smart textiles, gives significantly less penetration into the porous media with higher viscosity. Swansea University in the UK performed work exploring that concept of high viscosity and penetration into porous media. The result is a third benefit: controlled penetration on porous substrates.
In this short video, you can learn:
* The platform can jet 100 centipoise at jetting conditions, with temperature or non-Newtonian fluids influencing those conditions.
* Higher viscosity allows less dilution, so more functionality can be carried in the fluid.
* Higher-viscosity droplets spread less easily on landing and penetrate porous media less; Swansea University explored the penetration concept.
π **Clip Abstract** Typical inkjet heads run at 3 to 5 centipoise, some water-based heads around 10 and high-productivity heads up to 30, while the platform can print 100 centipoise at jetting conditions. Higher viscosity gives less dilution and more fluid functionality, easier droplet-spread control, and significantly less penetration into porous media such as smart textiles, with Swansea University exploring that penetration concept.
About the speaker:
* Speaker: Karl Forbes
* Company: XAAR
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#HighViscosityInkjet, #DropletSpreadControl, #PorousSubstratePenetration, #NonNewtonianFluids, #PrintedElectronics, #AdditiveElectronics
10:37 - 12:41
Can inkjet replace plastic film wrap with a printed dielectric that holds off 10 kilovolts?
Can inkjet replace plastic film wrap with a printed dielectric that holds off 10 kilovolts?
The discussion starts with a commercialized high-viscosity, high-pigment fluid: apply clear coat and ripples show on the car. It then moves to dielectric coatings. Automotive batteries are typically wrapped in plastic film as the dielectric to prevent arcing, but that film complicates thermal management, gluing many cells, and lap shear strength to an aluminum box.
Automotive interest extends beyond batteries to dielectric on cooling trays and power electronics housings. Existing solutions carry compromises. A Shifang digital coating machine with Xaar printheads inside is industrial and currently does about 20,000 batteries per day on each machine in China. The line uses laser cleaning and plasma activation before printing.
Xaar printheads deposit dielectric fluid about 100 microns thick, providing about 10 kilovolt dielectric protection. It is a UV-curable fluid; after a flash and about two seconds, the battery is coated digitally. Xifang are now moving towards commercializing a new solution for digitalizing conformal coatings.
In this short video, you can learn:
* A commercialized high-viscosity, high-pigment inkjet fluid can show ripples through clear coat on a car.
* The Shifang digital coating machine uses Xaar printheads, laser cleaning and plasma activation to process about 20,000 batteries per day per machine.
* Printed dielectric about 100 microns thick provides about 10 kilovolt protection and is UV-cured in roughly two seconds.
π **Clip Abstract** Automotive battery cells are usually wrapped in plastic film as dielectric protection, but that film hampers thermal management, gluing and lap shear strength to aluminum. A Shifang digital coating machine with Xaar printheads uses laser cleaning and plasma activation to print UV-curable dielectric about 100 microns thick, providing about 10 kilovolt protection at roughly 20,000 batteries per day per machine, while Xifang moves toward digital conformal coatings.
About the speaker:
* Speaker: Karl Forbes
* Company: XAAR
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#PrintedDielectric, #HighViscosityInkjet, #UVCurableDielectric, #BatteryCellCoating, #PrintedElectronics, #AdditiveManufacturing
05:18 - 07:00
Can raising viscosity alone, with no extra pigment, double colour density and tame dot gain?
Can raising viscosity alone, with no extra pigment, double colour density and tame dot gain?
Swansea University took a standard 12 centipoise pigmented water-based ink designed for printed cardboard and measured cyan optical density as ink laydown increased. Nazdar Fluids then made a version at 50 centipoise: no more pigment, no more solids content, only viscosity raised. Swansea used the Aquinox to run the print trials.
At identical pigment content, the 50 centipoise fluid delivered significantly higher colour density. Swansea's white paper concludes that raising viscosity alone could roughly halve the ink needed for the same colour density, or instead achieve a significantly higher density that is simply not possible with a 12 centipoise fluid.
The same paired experiments examined dot spread and dot control. Dot gain becomes significantly more controllable as viscosity increases. The 12 centipoise water-based fluid dropped onto the substrate spreads in an uncontrollable, unpredictable way, which is genuinely hard for process control and explains why dot control matters.
In this short video, you can learn:
* Raising a cardboard ink from 12 to 50 centipoise with no added pigment gave significantly higher cyan density in Swansea's trials.
* Swansea concluded that higher viscosity could halve ink consumption for equal colour density, or exceed the density a 12 centipoise fluid can reach.
* Dot gain was significantly more controllable at 50 centipoise, while the 12 centipoise fluid spread unpredictably on the substrate.
π **Clip Abstract** Swansea University and Nazdar Fluids compared a 12 centipoise pigmented water-based cardboard ink against a 50 centipoise version holding identical pigment and solids. Printed on the Aquinox, the higher-viscosity fluid gave significantly higher colour density and more controllable dot gain, pointing to roughly half the ink for the same density.
About the speaker:
* Speaker: Karl Forbes
* Company: XAAR
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#HighViscosityInkjet, #DotGainControl, #OpticalDensity, #WaterBasedInk, #PrintedElectronics, #InkjetPrinting
About this talk
β Beyond Low-Viscosity Limits: Rethinking Inkjet for Production Electronics Manufacturing Β· Karl Forbes Β· The Future of Electronics RESHAPED 2026 Berlin


