top of page

Kim De Nolf

QustomDot

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Kim De Nolf | QustomDot: Which microLED production bottlenecks can on-chip quantum dot color conversion actually remove?

01:36 - 03:24

Other snippets from this talk

Summary of the clip:

Which microLED production bottlenecks can on-chip quantum dot color conversion actually remove?

The clip lists microLED production bottlenecks: wafer uniformity, red microLED cost, and red microLED performance as devices shrink. It also cites complex driving electronics because microLEDs use different semiconductors, plus mass transfer that is complex and expensive, and costly inspection and repair. Quantum dots can transform blue LEDs into red and green LEDs, and placing them directly onto the LED chip opens a wide range of applications.

The proposed route is to overcome these production-process challenges with quantum dots by converting a blue microLED wafer into an RGB microLED wafer through quantum dot color conversion. This process is described as compatible with mass transfer, all-in-one transfer, 3D structures, monolithic integration, and the other technologies in the microLED world. The stated aim is to use quantum dots directly onto the LED chip.

The clip positions quantum dot color conversion as a way to help microLED production by turning a blue microLED wafer into an RGB microLED wafer. It stresses compatibility with mass transfer, all-in-one transfer, 3D structures, and monolithic integration, so the conversion approach is presented as adaptable across microLED assembly routes. The remaining challenge is introduced at the clip’s end.

In this short video, you can learn:
* Wafer uniformity, red microLED cost, and shrinking red microLED performance are listed as production bottlenecks.
* Complex driving electronics arise because microLEDs use different semiconductors, while mass transfer and inspection/repair are complex or expensive.
* Quantum dots can convert blue LEDs to red and green, and on-chip conversion turns a blue microLED wafer into an RGB wafer compatible with multiple transfer and integration routes.

📋 **Clip Abstract** This clip outlines microLED production bottlenecks including wafer uniformity, red microLED cost and shrinking-device performance, complex driving electronics, mass transfer, and inspection and repair. It then describes using quantum dots for on-chip color conversion to turn a blue microLED wafer into an RGB microLED wafer, compatible with mass transfer, all-in-one transfer, 3D structures, and monolithic integration.

About the speaker:
* Speaker: Kim De Nolf
* Company: QustomDot
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#QuantumDotColorConversion, #BlueMicroLEDWafer, #OnChipQuantumDots, #RGBMicroLEDWafer, #MicroLEDManufacturing, #DisplayMaterials

This is a highlight of the presentation:

On-chip Grade Quantum Dots For Future Display Technologies

Displays & Lighting 2021: Innovations & Market Trends

​

14-16 July 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

07:16 - 08:29

How does an indium phosphide synthesis tune quantum dot color at full yield without cadmium?

How does an indium phosphide synthesis tune quantum dot color at full yield without cadmium?

The patented quantum dot synthesis was invented in 2014 and is indium phosphide-based, RoHS compliant and intended for color conversion. It does not use the restricted cadmium, mercury or lead. The precursors in this synthesis are described as very safe and easy to handle, which is part of the claimed material approach.

The special feature of this indium phosphide synthesis is quantum dot size tuning at full reaction yield with the indium precursor. By changing the halide in the precursor, the quantum dot size changes. That produces a different emission color at the end of the reaction, as shown in the bottom figure. This connects precursor chemistry to final color in the same synthesis.

For color conversion, the synthesis is presented as RoHS compliant and free of restricted cadmium, mercury and lead. Its indium phosphide composition and safe, easy-to-handle precursors are the stated basis. The halide change in the indium precursor is the color-tuning lever, and the reaction yield remains full while that size tuning occurs.

In this short video, you can learn:
* The patented indium phosphide quantum dot synthesis was invented in 2014 and is RoHS compliant.
* It avoids restricted cadmium, mercury and lead, and its precursors are described as safe and easy to handle.
* Quantum dot size and emission color are tuned at full reaction yield by changing the halide in the indium precursor.

📋 **Clip Abstract** A 2014-patented indium phosphide quantum dot synthesis provides RoHS-compliant color conversion without restricted cadmium, mercury or lead. Its indium precursor allows quantum dot size and emission color to be tuned at full reaction yield by changing the precursor halide.

About the speaker:
* Speaker: Kim De Nolf
* Company: QustomDot
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#IndiumPhosphide, #HalidePrecursor, #FullReactionYield, #CadmiumFreeQDs, #ColorConversion, #DisplayMaterials

01:20 - 03:24

What production bottlenecks hold microLEDs back, and how can quantum dot color conversion solve them?

What production bottlenecks hold microLEDs back, and how can quantum dot color conversion solve them?

Because microLED pixels are so small, they leave room to integrate other functionality on the same platform. The production process still carries heavy burdens: wafer uniformity must be controlled, and red microLEDs are costly while losing performance as they are scaled down. Driving electronics are also complex, since the emitters rely on different types of semiconductors, and mass transfer, inspection and repair are all expensive steps.

Quantum dots offer a different route: they can transform blue LEDs into red and green emitters. Instead of separate red and green sources, the concept is to place quantum dots directly onto the LED chip, which opens up a wide range of applications. In practice, the target is to take a blue microLED wafer and add quantum dot color conversion to produce an RGB microLED wafer.

Compatibility is the point. The process is presented as compatible with mass transfer, but also with all-in-one transfer, 3D structures, monolithic integration, and all the other technologies out there in the microLED world. That list spans the main assembly routes under development. The discussion then turns to the remaining challenge.

In this short video, you can learn:
* Red microLEDs are expensive and degrade in performance as they get smaller, which is one driver for quantum dot color conversion.
* Complex driving electronics, because microLEDs use different types of semiconductors, plus costly mass transfer, inspection and repair, add to the production burden.
* The proposed route converts a blue microLED wafer into an RGB microLED wafer using quantum dots, and is claimed compatible with mass transfer, all-in-one transfer, 3D structures and monolithic integration.

📋 **Clip Abstract** MicroLED production is held back by wafer uniformity demands, costly and shrinking red microLEDs, mixed-semiconductor driving electronics, and expensive mass transfer, inspection and repair. Quantum dot color conversion applied directly on a blue microLED wafer aims to deliver an RGB wafer that stays compatible with mass transfer, all-in-one transfer, 3D structures and monolithic integration.

About the speaker:
* Speaker: Kim De Nolf
* Company: QustomDot
* Event: Quantum Dots 2021
* Location: Online

Join TechBlick - the home of frontier display technologies such as microLEDs, AR/VR, quantum dots, and beyond
https://www.techblick.com/

#QuantumDotColorConversion, #BlueMicroLEDWafer, #MonolithicIntegration, #AllInOneTransfer, #MicroLEDDisplays, #QuantumDots

09:54 - 11:24

What stability has QustomDot demonstrated for quantum-dot thin films under blue LED pumping?

What stability has QustomDot demonstrated for quantum-dot thin films under blue LED pumping?

QustomDot describes a customer-oriented path from quantum dots on macro-sized LEDs to thin films and ultimately to quantum dots patterned on top of micro LEDs. For thin films, it says it is fully in this transition. The first stage coated quantum dots at 100 to 150 micrometers thickness and used blue LED pump intensity of 130 milliwatts per square centimeter.

The thin-film tests were performed in an inert atmosphere. Under blue LED pumping at 130 milliwatts per square centimeter, the graph presented shows more than 1,500 hours of stability. This is reported for the first-stage coating with a layer thickness of 100 to 150 micrometers. QustomDot says it will continue working on the transition toward thin films.

The longer-term target is quantum dots patterned in, on top of micro LEDs. QustomDot describes the path as moving from quantum dots on macro-sized LEDs to quantum dots in thin films, then to that patterned structure. It says it is fully in the thin-film transition and will continue working on the z dimension.

In this short video, you can learn:
* QustomDot coated quantum dots in thin films at 100 to 150 micrometers thickness and tested them with 130 milliwatts per square centimeter blue LED pumping in an inert atmosphere.
* The presented graph shows more than 1,500 hours of stability for this first-stage thin-film coating.
* The roadmap moves from quantum dots on macro-sized LEDs to thin films and then to quantum dots patterned on top of micro LEDs, with continued work on the z dimension.

📋 **Clip Abstract** QustomDot reports more than 1,500 hours of stability for quantum-dot thin films pumped by a blue LED at 130 milliwatts per square centimeter. The first-stage films were coated at 100 to 150 micrometers thickness and tested in an inert atmosphere, as the company moves from macro-sized LEDs toward thin films and ultimately quantum dots patterned on top of micro LEDs.

About the speaker:
* Speaker: Kim De Nolf
* Company: QustomDot
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#QuantumDotThinFilms, #BlueLEDPumping, #InertAtmosphereTesting, #1500HourStability, #MicroLEDDisplays, #QuantumDotConversion


About this talk

→ On-chip Grade Quantum Dots For Future Display Technologies · Kim De Nolf · Displays & Lighting: Innovations & Market Trends 2021


Other talks by Kim De Nolf

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page