Laszlo Izso | ATLANT3D: Why sweep temperature, thickness and geometry on a single wafer when mapping TiO2 index or platinum morphology?
13:29 - 14:53
Other snippets from this talk
Summary of the clip:
Why sweep temperature, thickness and geometry on a single wafer when mapping TiO2 index or platinum morphology?
Ozone is often used as a co-reactant: it etches the polymer, yet deposition on polymer is still possible. The tool shines in material discovery. A partner wanted to check the reflective index of titanium oxide deposited at different temperatures and different thicknesses. That substrate is run through the thicknesses and through the temperatures, then it is ready for characterization.
The next step moves beyond varying one dimension. The user can vary geometries in different dimensions ā flow rates, deposition height, deposition temperature. In one geometry, the sample is thrown into the characterization tool and everything is seen in 3D or 2D. That turns a single experiment into a multidimensional sweep, not a single point, and the geometry itself becomes one of the mapped variables.
A gradient platinum line shows the payoff. Along that line, platinum transitions from nano islands to clusters to some porous material, and finally to a very nice polycrystalline structure. One line, one characterization pass, so the full morphology sequence becomes visible. This is advanced material combinatorics: the geometry and the processing conditions are mapped together instead of being explored one point at a time.
In this short video, you can learn:
* Ozone acts as a co-reactant that etches polymer, yet deposition on polymer remains possible.
* A partner mapped titanium oxide reflective index across different deposition temperatures and thicknesses in one substrate run.
* A gradient platinum line reveals a morphology sequence from nano islands to clusters to porous material to polycrystalline structure.
š **Clip Abstract** A direct atomic layer processing tool is positioned for material discovery, using ozone as a co-reactant that etches polymer while still allowing polymer deposition. A partner's titanium oxide reflective index study across different temperatures and thicknesses, and a gradient platinum line spanning nano islands, clusters, porous material and polycrystals, show how one substrate can carry a multidimensional sweep.
About the speaker:
* Speaker: Laszlo Izso
* Company: ATLANT3D
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
šļø Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#GradientPlatinumLine, #TitaniumOxideIndex, #OzoneCoReactant, #MaterialCombinatorics, #AtomicLayerProcessing, #MaterialsDiscovery
This is a highlight of the presentation:
Direct Atomic Layer Processing (DALP) & Advanced material combinatorics
More Highlights from the same talk.
01:10 - 03:27
How does a moving microfluidic nozzle replace chamber-to-chamber ALD and enable thickness gradients on one wafer?
How does a moving microfluidic nozzle replace chamber-to-chamber ALD and enable thickness gradients on one wafer?
In conventional ALD the precursor gases are separated in time, and lately more separated in space, with the substrate moving quickly between chambers. This approach takes it a step further: the gases are contained inside a microfluidic device, a nozzle or print head, that moves above the substrate. That nozzle is the heart of the technology. The working principle: precursor, inert and core reactant are spatially separated, and the reaction only happens when the nozzle is moving ā never in static mode.
The working distance between nozzle and substrate is roughly 50 to 200 micrometres. ALD operates in nanometres ā technically from one atomic layer, but more realistically five nanometres up to a few hundred, limited only by process time. Thickness scaling differs too: traditionally more thickness means more cycles, whereas here it means more passes over the material. The mirrored nozzle can move in any direction, and because the reactant chamber is very small, gases can be purged out within minutes.
Thickness gradients have long been a challenge for traditional ALD: the process coats the whole surface, so different parts of the substrate must be masked out, making it a multi-step process. With a moving nozzle, gradients come very easily ā simply run different passes over different parts of the substrate. Different materials can also be deposited because the nozzle, and therefore the reactant chamber, is very small ā small enough that the gases can be purged out within minutes.
In this short video, you can learn:
* The reaction only happens when the nozzle is moving; static mode produces no deposition.
* Nozzle-to-substrate working distance is roughly 50 to 200 micrometres, and ALD film thickness runs from one atomic layer to a few hundred nanometres.
* Thickness gradients, traditionally a masked multi-step process, come from different passes over different parts of the substrate.
š **Clip Abstract** A microfluidic nozzle replaces chamber-to-chamber ALD by confining precursor, inert and core reactant in a print head that reacts only while moving over the substrate. Multiple passes over selected regions create thickness gradients without masking, and the small reactant chamber allows different materials and purging within minutes.
About the speaker:
* Speaker: Laszlo Izso
* Company: ATLANT3D
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
šļø Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#AtomicLayerDeposition, #MicrofluidicNozzle, #ThicknessGradient, #NanometreFilms, #ThinFilmDeposition, #PrintedElectronics
06:10 - 07:52
How does a startup pick precursors, validate them by high-flow CVD and EDX, then adapt a recipe for low-temperature deposition?
How does a startup pick precursors, validate them by high-flow CVD and EDX, then adapt a recipe for low-temperature deposition?
The material validation roadmap begins with planning, driven by customer requests or an internal application roadmap. Precursor or reactant selection comes next, together with temperatures taken from atomic limits that are already widely known in the ALD world. A high-flow CVD test then pushes flows very high; the result is ugly but deposits onto the wafer. That wafer goes to an EDX tool to confirm the material is present and the reaction occurred. This approach adapted for all materials tested just fine.
During adaptation, parameters are fine-tuned: flows, temperatures, and the deposition distance. The target is a rectangular profile just under the micro nozzle. A material is considered developed once at least one working recipe exists with temperatures and flow rates defined. Characterization for growth purposes is typically done on a silicon or silicon dioxide wafer. Recipes can later be chosen to change the material properly, or to meet a customer request for low-temperature deposition. That low-temperature request is doable, but not every material is ready at the moment.
Readiness depends on whether a working recipe with temperatures and flow rates has been established and characterized. The roadmap moves from planning to validation, high-flow CVD, EDX confirmation, adaptation, then characterization on silicon dioxide. Customer requests or internal application roadmaps drive which precursors and reactants are chosen. Low-temperature deposition can be developed when needed, but not every material is ready at the moment. The work coming from the back fills those gaps.
In this short video, you can learn:
* A material is considered developed only when at least one working recipe defines temperatures and flow rates.
* High-flow CVD followed by EDX confirms whether the precursor reaction produced the intended material on the wafer.
* Adaptation fine-tunes flows, temperatures and deposition distance to achieve a rectangular profile under the micro nozzle.
š **Clip Abstract** The validation roadmap starts with planning from customer or internal application needs, then selects precursors and reactants using atomic-limit temperatures. High-flow CVD tests ugly deposits onto a wafer for EDX confirmation, after which adaptation fine-tunes flows, temperatures and deposition distance toward a rectangular profile under the micro nozzle, with material development defined by a working recipe and characterization typically on silicon dioxide.
About the speaker:
* Speaker: Laszlo Izso
* Company: ATLANT3D
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin
šļø Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped
#HighFlowCVD, #EDXMaterialValidation, #PrecursorSelection, #RectangularProfile, #AtomicLayerDeposition, #ThinFilmProcessing
About this talk
ā Direct Atomic Layer Processing (DALP) & Advanced material combinatorics Ā· Laszlo Izso Ā· The Future of Electronics RESHAPED 2025
Other talks by Laszlo Izso
- Direct Atomic Layer Processing (DALP): Redefining Microfabrication Ā· Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025


