top of page

Marat Lutfullin

Quantum Solutions

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Marat Lutfullin | Quantum Solutions: How does a perovskite quantum dot film raise LCD color gamut to 85% of Rec. 2020?

04:07 - 05:36

Other snippets from this talk

Summary of the clip:

How does a perovskite quantum dot film raise LCD color gamut to 85% of Rec. 2020?

For LCD backlighting, the film is ROHS-compliant and has a very high blue-light absorption coefficient. Its emission is centered at 525 nm, with extremely narrow full width at half maximum below 20 nm and photoluminescence quantum yield above 95%. These are the measured film properties presented for the display color-converter application.

Standard LCD screens reproduce about 60 to 75% of the Rec. 2020 color gamut, according to the talk. A QDOT display with perovskite quantum dots inside can reproduce 85% of Rec. 2020. The film therefore enhances LCD color gamut, enabling more vivid images close to what the human eye sees in the real world, with more shades of green and blue.

The architecture uses a Magenta LED: a blue LED chip with narrowband red phosphor. That chip simultaneously emits blue and red light, and both lights pass through the QDOT sharpened film. This is the mechanism described for combining the blue and red LED emission with the perovskite quantum dot color converter in the display stack.

In this short video, you can learn:
* The ROHS-compliant film emits at 525 nm with sub-20 nm full width at half maximum and more than 95% photoluminescence quantum yield.
* Perovskite quantum dot LCDs reach 85% of Rec. 2020, compared with about 60 to 75% for standard LCD screens.
* The Magenta LED combines a blue LED chip with narrowband red phosphor so blue and red light pass through the QDOT film.

📋 **Clip Abstract** A ROHS-compliant perovskite quantum dot color converter film for LCD backlighting emits at 525 nm with sub-20 nm full width at half maximum and more than 95% photoluminescence quantum yield. In a Magenta LED architecture using a blue chip with narrowband red phosphor, the film raises LCD color gamut to 85% of Rec. 2020 versus about 60 to 75% for standard LCDs.

About the speaker:
* Speaker: Marat Lutfullin
* Company: Quantum Solutions
* Event: Quantum Dots 2021
* Location: Online

Join TechBlick - the home of frontier display technologies such as microLEDs, AR/VR, quantum dots, and beyond
https://www.techblick.com/

#PerovskiteQDCFilm, #Rec2020Gamut, #MagentaLED, #525nmEmission, #QuantumDotDisplays, #LCDBacklighting

This is a highlight of the presentation:

Perovskite Quantum Dots Color Converter Film in Displays and Sensors

Quantum Dots 2021

​

12 May 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

04:07 - 06:29

How does a magenta LED plus green perovskite film hit 85% Rec. 2020?

How does a magenta LED plus green perovskite film hit 85% Rec. 2020?

The first promising application is LCD backlighting, where a ROHS-compliant perovskite film was developed with a very high blue light absorption coefficient. Its emission is centred at 525 nanometres, with an extremely narrow full width at half maximum of less than 20 nanometres, and photoluminescence quantum yield above 95%. Those three parameters, absorption, spectral width and quantum yield, are the ones quoted for the LCD backlighting application.

On colour gamut, a standard LCD screen reproduces roughly 60 to 75% of the Rec. 2020 standard, while a QDOT display with perovskite quantum dots inside reaches 85%. On the CIE chromaticity diagram, the dashed black line marks Rec. 2020, as recommended by the National Television Committee for ultra-high-definition 8K and 4K displays; the red triangle is a standard LCD at about 65%, and the bold black line is the QD-OLED display.

The architecture is powered by a magenta LED: a blue LED chip with a narrowband red phosphor that emits blue and red light simultaneously. Both wavelengths pass through the QDOT sharpened film, which generates the necessary green light before it reaches the LCD matrix. The result is more vivid images, close to what the human eye sees in the real world, with more shades of green and blue visible.

In this short video, you can learn:
* The film emits at 525 nm with a full width at half maximum below 20 nm and photoluminescence quantum yield above 95%, and is ROHS-compliant.
* Perovskite quantum dots lift LCD colour gamut coverage from 60 to 75% of Rec. 2020 up to 85%, with the largest gain in the green and blue region of the CIE diagram.
* A magenta LED made of a blue LED chip plus narrowband red phosphor supplies blue and red simultaneously, and the QDOT sharpened film turns that blue into green for the LCD matrix.

📋 **Clip Abstract** A ROHS-compliant perovskite quantum dot film emitting at 525 nm with sub-20 nm linewidth and over 95% quantum yield raises LCD colour gamut to 85% of Rec. 2020, against 60 to 75% for a standard LCD. The gain comes from a magenta LED, a blue chip plus narrowband red phosphor, whose blue and red output the film converts into green for the LCD matrix.

About the speaker:
* Speaker: Marat Lutfullin
* Company: Quantum Solutions
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQuantumDots, #MagentaLED, #NarrowbandRedPhosphor, #Rec2020Gamut, #ColorConversionFilm, #LCDBacklighting

10:10 - 12:26

Can one printable perovskite film turn silicon into an X-ray and UV sensor?

Can one printable perovskite film turn silicon into an X-ray and UV sensor?

Silicon, the most abundant sensor material, is sensitive mainly from 400 to 1000 nanometres and responds poorly to high-energy wavelengths like UV or X-rays. A perovskite film can instead act as an X-ray scintillator, absorbing UV and X-rays and converting them into green light that a silicon photodiode captures. With KAUST, a chip was imaged through a perovskite scintillation screen by a conventional silicon camera, resolving all features at very high resolution.

Feasibility studies with several X-ray companies are under way to develop this product. Two principal advantages drive the interest. First, the material is printable: no other commercial scintillators are printable, and printing perovskite quantum dots allows any form factor and any pixel size, which matters for high-resolution sensors. Second, very large-area films can be made, enabling large-area sensors.

The second application is UV sensing, close to X-ray scintillation but capturing UV light. In another KAUST study, the film was drop-cast on top of a silicon photodiode and external quantum efficiency was checked. The black curve is the silicon photodiode alone; the green curve adds the quantum dots, and the combination increased the sensitivity of the sensor.

In this short video, you can learn:
* Silicon photodiodes cover 400 to 1000 nanometres but respond poorly to UV and X-rays, which perovskite films convert to green light.
* Printable perovskite quantum dots allow any form factor and pixel size and large-area films, unlike commercial scintillators.
* Drop-casting perovskite dots onto a silicon photodiode raised its external quantum efficiency for UV light.

📋 **Clip Abstract** A printable perovskite quantum-dot film absorbs UV and X-rays and re-emits green light that conventional silicon photodiodes detect, extending silicon sensitivity beyond 400-1000 nanometres. Demonstrated with KAUST in X-ray imaging and UV drop-cast EQE measurements, it offers any pixel size, any form factor and large-area films.

About the speaker:
* Speaker: Marat Lutfullin
* Company: Quantum Solutions
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQuantumDots, #XrayScintillator, #SiliconPhotodiode, #DropCastFilm, #PrintedElectronics, #OpticalSensors

07:18 - 08:51

How did perovskite quantum dot films move from degrading in days to 1,000-hour reliability under heat and humidity?

How did perovskite quantum dot films move from degrading in days to 1,000-hour reliability under heat and humidity?

When the project began in 2018, reliability was very poor: quantum dots degraded within a few days, results presented at SID and the Quantum Dot Forum. Many companies were asking about this. Turning that round meant attacking the problem from both the quantum dot and the polymer side at once, rather than optimising a single layer and hoping the stack survived.

On the quantum dot side, the team synthesised dots with the minimal defects possible to raise efficiency, then applied special ligands and shelling to increase stability. Defect control comes first, surface chemistry second: those are the levers that decide whether a perovskite dot can be made stable enough for a film in the first place.

From the polymer side, around 100 different components were screened to find those compatible with the perovskites, and barrier layers were added for further reliability. The film is now described as very reliable under high temperature and high humidity within 1,000 hours. Losses remain under high flux, 150 milliwatts per centimetre squared, and continuous improvement is expected to lift that parameter soon.

In this short video, you can learn:
* In 2018 the perovskite quantum dots degraded within a few days, a result the team presented at SID and the Quantum Dot Forum.
* Around 100 polymer components were screened for compatibility with the perovskites, with barrier layers added to raise reliability further.
* The film is now reliable under high temperature and high humidity within 1,000 hours, though losses persist at 150 milliwatts per centimetre squared.

📋 **Clip Abstract** Reliability was the blocking question when the perovskite quantum dot film project started in 2018, with dots degrading within days. Defect-minimal synthesis, special ligands and shelling, a screen of around 100 polymer components and barrier layers have carried the film to 1,000 hours under high temperature and humidity, with high-flux losses at 150 milliwatts per centimetre squared still to address.

About the speaker:
* Speaker: Marat Lutfullin
* Company: Quantum Solutions
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQuantumDots, #ColorConverterFilm, #BarrierEncapsulation, #ThousandHourReliability, #QuantumDotDisplays, #DisplayMaterials


About this talk

→ Perovskite Quantum Dots Color Converter Film in Displays and Sensors · Marat Lutfullin · Displays & Lighting: Innovations & Market Trends 2021


Other talks by Marat Lutfullin

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page