top of page

Mauro Francesco Sgroi

Stellantis

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Mauro Francesco Sgroi | Stellantis: Can DFT replace months of open-circuit-voltage measurements for a new electrode?

11:02 - 13:22

Other snippets from this talk

Summary of the clip:

Can DFT replace months of open-circuit-voltage measurements for a new electrode?

Open-circuit voltage as a function of state of charge is one of the most useful properties of an electrode: it is a necessary input for electrochemical modelling of a lithium-ion cell. The problem is acquisition. Measuring the full curve experimentally means very long procedures lasting many days or months, because every state of charge must be covered and the procedure repeated to obtain robust data.

The computational route gives that potential from the difference between the chemical potential of lithium in cathode and anode. In this equation z is the charge transferred during the electrochemical process and F is the Faraday constant. The chemical potential is accessible because we can calculate the variation of Gibbs free energy of the electrode material as a function of its lithium content, giving average voltage as ΔG divided by zF.

At low temperature the entropic contribution is small, so the variation of Gibbs free energy can be approximated by the variation of internal enthalpy. That variation of internal energy is exactly what density functional theory delivers when the computational approach is applied to the electrode, the basis for treating a candidate such as the Li2TiS3 cathode without waiting for months of measurement.

In this short video, you can learn:
* Open-circuit-voltage curves are a required input for lithium-ion cell modelling, yet experimental acquisition takes many days to months and must be repeated for robust data.
* The average voltage follows from the lithium chemical-potential difference between cathode and anode, computed as the Gibbs free-energy variation divided by zF.
* Because the entropic term is small at low temperature, DFT's internal-energy variation substitutes for Gibbs free energy in the Li2TiS3 case.

📋 **Clip Abstract** Density functional theory can supply the open-circuit-voltage curve that lithium-ion cell models need, bypassing experiments that run for days or months. From the lithium chemical-potential difference between cathode and anode, the calculation returns average voltage as the Gibbs free-energy variation divided by zF, with DFT internal energy standing in at low temperature, the route taken for Li2TiS3.

About the speaker:
* Speaker: Mauro Francesco Sgroi
* Company: Stellantis
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#DFT, #OpenCircuitVoltage, #Li2TiS3Cathode, #GibbsFreeEnergy, #LithiumIonBatteries, #BatteryMaterialsModelling

This is a highlight of the presentation:

The role of materials simulation in the design of Li-ion batteries: the case of Li2TiS3 cathode

Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap

Battery Materials: Next-Gen & Beyond Lithium Ion

9-10 February 2022

Online

Organised By:

TechBlick

TechBlick

More Highlights from the same talk.

01:26 - 02:37

How can atomistic simulation reduce the experiments needed to design new lithium-ion cathodes, anodes and solid electrolytes?

How can atomistic simulation reduce the experiments needed to design new lithium-ion cathodes, anodes and solid electrolytes?

The work applies computational material science to simulate the properties of lithium-ion cell materials, specifically for designing new materials: new anodes, new cathodes, new solid electrolytes and so on. The stated objective is to use computational material science to design novel materials, rather than relying solely on experimental iteration over existing chemistries.

The same approach serves multiscale simulation of lithium-ion cells. The material models generate material properties and generate data that feed larger-scale simulations, such as finite element simulations of lithium-ion cells. Atomistic output therefore becomes input for larger-scale models, connecting the atomistic description of a material to the cell-level behaviour that engineers design against.

In practice the approach is used to determine the properties of electrodes in contact with the electrolyte, including diffusion coefficients, and those computed values feed the larger-scale cell models. More broadly, the method is able to reduce the number of experiments needed to develop novel lithium-ion chemistries — the practical argument for putting materials simulation into the battery design loop.

In this short video, you can learn:
* Computational material science is applied to lithium-ion cell materials to design new anodes, new cathodes and new solid electrolytes.
* Simulated material properties and generated data are passed to larger-scale simulations, including finite element simulations of lithium-ion cells.
* The approach determines properties of electrodes in contact with the electrolyte, such as diffusion coefficients, and reduces the number of experiments needed to develop novel lithium-ion chemistries.

📋 **Clip Abstract** Materials-level simulation is applied to lithium-ion cell materials to design new anodes, cathodes and solid electrolytes, and to generate properties and data for larger-scale finite element cell simulations. Used to determine electrode-electrolyte properties and diffusion coefficients, the approach reduces the number of experiments required to develop novel lithium-ion chemistries.

About the speaker:
* Speaker: Mauro Francesco Sgroi
* Company: Stellantis
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#AtomisticSimulation, #ElectrodeElectrolyteInterface, #DiffusionCoefficients, #FiniteElementModeling, #LithiumIonBatteries, #ComputationalMaterialsScience

23:55 - 25:04

Why can't lithium titanium sulphur be used in real lithium-ion cells today?

Why can't lithium titanium sulphur be used in real lithium-ion cells today?

Lithium titanium sulphur is hard to use in real lithium-ion cells because the material is unstable. In contact with a normal liquid electrolyte it decomposes, so it cannot be applied directly. That instability is the immediate barrier to putting this sulfide cathode into today’s liquid-cell formats.

The route discussed is stabilization: make the material stable enough for real cells and couple it with proper solid-state electrolytes. This is presented as the current effort, not a solved design. Solid-state coupling is the proposed way to avoid the liquid-electrolyte decomposition path that blocks direct use.

A European project, SPIDER, led by CEA in France, is completely devoted to this material. The speaker also says his work is in this field. The remaining difficulty is explicitly in real application in real cells, so the gap is between this sulfide cathode and stable cell-level implementation.

In this short video, you can learn:
* Lithium titanium sulphur decomposes in contact with normal liquid electrolyte, so it cannot be applied directly.
* Stabilization and coupling with proper solid-state electrolytes are the stated routes to make it stable in real cells.
* SPIDER, led by CEA in France, is a European project completely devoted to this material, and the speaker’s work is in this field.

📋 **Clip Abstract** Lithium titanium sulphur cannot be directly applied in real lithium-ion cells because it decomposes in normal liquid electrolyte. The effort is to stabilize it and couple it with proper solid-state electrolytes, with SPIDER led by CEA in France devoted to the material and remaining difficulties located in real-cell application.

About the speaker:
* Speaker: Mauro Francesco Sgroi
* Company: Stellantis
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#LithiumTitaniumSulphurCathode, #LiquidElectrolyteDecomposition, #SolidStateElectrolyteCoupling, #SulfideCathodeStabilization, #SolidStateBatteries, #LithiumIonBatteries

17:50 - 20:10

Why does cubic LTS promise high capacity over layered sulfides yet remain metastable, reactive and low-voltage?

Why does cubic LTS promise high capacity over layered sulfides yet remain metastable, reactive and low-voltage?

LTS is a cubic lithium titanium sulfide first studied by the Sakuda group in Japan. It contains no critical raw materials under the European Commission classification—materials scarce in Europe or difficult to substitute—and offers very high capacity, outperforming analog layered sulfides. Its drawbacks are equally clear: the material is metastable, highly reactive, and has a low operating voltage.

Structurally, LTS has a cubic lattice with titanium and lithium randomly distributed on the 4a crystallographic sites, while sulfur occupies the 4b sites. Treating the material as a solid solution—a random titanium/lithium distribution—reveals more than 4,000 non-equivalent configurations. These configurations fall into two macrogroups: disordered, with no particular spatial ordering, and ordered, where titanium atoms are organized in rows or nearby arrangements.

This configuration landscape explains why simulation matters. The same cubic host can present thousands of local titanium/lithium arrangements, so properties cannot be inferred from one idealized cell. The trade-off is explicit: high capacity and no critical raw materials versus metastability, high reactivity and low voltage. Mapping disordered versus ordered configurations is the route to understanding that risk in LTS cathode design.

In this short video, you can learn:
* LTS is a cubic lithium titanium sulfide with no critical raw materials, very high capacity, and better performance than analog layered sulfides, but it is metastable, highly reactive and low-voltage.
* Titanium and lithium randomly occupy the 4a sites while sulfur occupies the 4b sites, and a solid-solution treatment yields more than 4,000 non-equivalent configurations.
* Those configurations divide into disordered and ordered macrogroups, with ordered cases showing titanium atoms organized in rows or nearby arrangements.

📋 **Clip Abstract** Cubic LTS, first studied by the Sakuda group, is attractive because it avoids critical raw materials and exceeds analog layered sulfides in capacity, yet it remains metastable, highly reactive and low-voltage. Treating its random titanium/lithium 4a occupancy as a solid solution generates over 4,000 non-equivalent configurations, split into disordered and ordered macrogroups that frame the simulation challenge.

About the speaker:
* Speaker: Mauro Francesco Sgroi
* Company: Stellantis
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online

Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/

#CubicLTS, #LithiumTitaniumSulfide, #4aSiteDisorder, #NonEquivalentConfigurations, #LiIonCathodes, #MaterialsSimulation


About this talk

→ The role of materials simulation in the design of Li-ion batteries: the case of Li2TiS3 cathode · Mauro Francesco Sgroi · Battery Materials: Next-Gen & Beyond Lithium Ion 2022

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page