top of page

Ming-Jong Jou

TCL CSOT

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Ming-Jong Jou | TCL CSOT: Should microLED backplanes use a-Si, LTPS or LTPO β€” and when does silicon-based win instead?

15:32 - 16:39

Other snippets from this talk

Summary of the clip:

Should microLED backplanes use a-Si, LTPS or LTPO β€” and when does silicon-based win instead?

The answer is not one backplane. A three-way split was described: a-Si for larger sizes, with the caveat that high current demands overcoming shift; LTPS as the mature solution; and LTPO reserved for low-power-consumption requirements. This frames backplane choice as a trade-off between size, current stress, maturity and power, not a single material roadmap.

For the first mass production, the focus is LTPS on glass-based displays. LTPS is called the mature solution, which matters for bringing self-emitting displays to production rather than waiting for every backplane option to mature. LTPO's role is narrower: it is tied to low-power-consumption requirements. That makes LTPO a targeted power play, while LTPS carries the initial manufacturing burden.

Silicon remains in the portfolio, but not on glass: the AR solution is based on silicon. That separates glass-based backplanes for larger or mass-produced displays from silicon-based drives for AR. The trade-off is therefore application-specific: a-Si for larger sizes under high current, LTPS for mature glass-based production, LTPO for low power, and silicon for AR rather than glass.

In this short video, you can learn:
* A-Si is proposed for larger sizes, but high current forces the shift issue to be overcome.
* LTPS is positioned as the mature solution and the first mass-production focus for glass-based displays.
* LTPO is reserved for low-power-consumption needs, while the AR solution uses silicon rather than glass.

πŸ“‹ **Clip Abstract** The clip lays out a three-way backplane trade-off for self-emitting displays: a-Si for larger sizes with high-current shift to overcome, LTPS as the mature glass-based choice for first mass production, and LTPO for low-power requirements. It also separates silicon-based AR from glass-based backplanes, showing that selection depends on size, power and application rather than one universal solution.

About the speaker:
* Speaker: Ming-Jong Jou
* Company: TCL CSOT
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands

Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/

#ASiBackplane, #LTPSGlassBackplane, #LTPOLowPower, #SiliconARBackplane, #MicroLEDBackplanes, #SelfEmittingDisplays

This is a highlight of the presentation:

Tiny Lights, Big Impact: The Advancement of Self-Emitting Displays

MicroLED Connect 2024

​

25-26 September 2024

High Tech Campus, Eindhoven, Netherlands

Organised By:

Metal Grass and TechBlick

​

More Highlights from the same talk.

05:38 - 07:05

Why do TV, high-end signage and car displays face completely different technical challenges?

Why do TV, high-end signage and car displays face completely different technical challenges?

The requirements depend on the application, even though market reports identify many potential opportunities. For TV and high-end signage, the technical challenge is how to achieve high PBI, how to reach high resolution and how to reduce power consumption further. The challenges for different applications are quite different, so each segment needs its own priorities.

Image quality is another constraint because it is expensive, yet consumers require image quality beyond premium LCD. Guaranteeing that image quality is challenging for TV and, especially, for car display, where the focus is on bin and on providing bin over the needed target rather than only resolution or power.

Across these segments, the common challenge is cost. No direct answer is provided because there are still many solutions and a right direction to work on. Four directions are summarized as important, framing the remaining work as a set of solution paths rather than a single answer.

In this short video, you can learn:
* TV and high-end signage prioritize high PBI, high resolution and further power reduction.
* Premium image quality beyond LCD is costly, and guaranteeing it is especially challenging for car displays focused on bin.
* Cost is the shared challenge, and four important directions are framed rather than one direct answer.

πŸ“‹ **Clip Abstract** The clip explains that display requirements diverge by application: TV and high-end signage target high PBI, high resolution and lower power, while automotive displays focus on bin and image quality beyond premium LCD. Cost is the common challenge, and four important directions are summarized instead of a single direct answer.

About the speaker:
* Speaker: Ming-Jong Jou
* Company: TCL CSOT
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands

Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/

#HighPBI, #HighResolution, #PowerConsumption, #PremiumLCDImageQuality, #SelfEmittingDisplays, #DisplayCostChallenge

11:20 - 12:28

At what pixel pitch does PCB give way to glass, and where do LED-based solutions take over?

At what pixel pitch does PCB give way to glass, and where do LED-based solutions take over?

The substrate choice is pitch-dependent. For pixel pitch greater than a stated threshold, PCB is presented as mature and cost-effective. Between that threshold and 0.1, glass is judged best, suitable for wearable displays and head-up displays. For pixel pitch below 0.1, the focus shifts to LED-based solutions.

In the LED-based route, micro LED replaces mini LED within one package. The stated reason is that reducing LED cell size can save a lot of cost. Through RDO technology, RGB is packed into one package. Today, these products are described as still very early stage.

An interposer is also used to pull RGB or pure blue chips into one square carrier. This is the packaging complement to the pitch-based substrate split: PCB above the threshold, glass down to 0.1, and LED-based micro LED below it. The challenge is framed as cost and package integration, not only emitter size.

In this short video, you can learn:
* PCB is positioned for pixel pitch above a stated threshold because it is mature and cost-effective.
* Glass is selected between that threshold and 0.1 for wearable displays and head-up displays.
* Below 0.1, the strategy moves to LED-based solutions, with micro LED replacing mini LED in one package and RDO packing RGB into one package.

πŸ“‹ **Clip Abstract** The substrate strategy splits by pixel pitch: PCB above a threshold, glass from that threshold to 0.1, and LED-based solutions below 0.1. For LED-based displays, micro LED replaces mini LED in one package, RDO packs RGB into one package, and an interposer collects RGB or pure blue chips on one square carrier.

About the speaker:
* Speaker: Ming-Jong Jou
* Company: TCL CSOT
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands

Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/

#PixelPitchSplit, #MicroLEDPackaging, #RGBInterposer, #PureBlueChip, #SelfEmittingDisplays, #MicroLEDDisplays


About this talk

β†’ Tiny Lights, Big Impact: The Advancement of Self-Emitting Displays Β· Ming-Jong Jou Β· MicroLED Connect 2024

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page