top of page

Nancy Stoffel

GE Research

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Nancy Stoffel | GE Research: Can aerosol-jet-printed strain gauges on power-turbine fan blades reveal creep and feed condition-based maintenance models?

08:03 - 08:52

Other snippets from this talk

Summary of the clip:

Can aerosol-jet-printed strain gauges on power-turbine fan blades reveal creep and feed condition-based maintenance models?

An aerosol jet OptiMech printer is used to print strain gauges directly on fan blades for a power turbine. The printing happens during the manufacturing process. Those gauges then remain available for inspection when time-based maintenance is performed over time. The aim is to observe whether the gauges are creeping and to identify when replacement is due.

Inspection during maintenance is not the endpoint. The information gathered from the printed strain gauges can be put into models that help with condition-based maintenance. That connects what is seen on the blade during time-based maintenance to a broader maintenance decision process. This is described as an ongoing project, with more opportunity seen for doing that sort of work.

The application described is a printed strain gauge on power-turbine fan blades. Printing occurs during manufacturing, and inspection continues during time-based maintenance over time. Creep observations and replacement timing are the specific outputs discussed. The effort is an ongoing project, and more opportunity is seen for doing that sort of work.

In this short video, you can learn:
* An OptiMech aerosol jet printer is used to print strain gauges on power-turbine fan blades during manufacturing.
* The gauges are inspected during time-based maintenance to see whether they are creeping and when replacement is due.
* The inspection information can be put into models that help with condition-based maintenance, and the project is ongoing.

📋 **Clip Abstract** This clip describes aerosol jet printing of strain gauges on power-turbine fan blades with an OptiMech printer during manufacturing. It explains that the gauges are inspected during time-based maintenance to observe creep and replacement timing, with that information feeding models for condition-based maintenance.

About the speaker:
* Speaker: Nancy Stoffel
* Company: GE Research
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#AerosolJetPrinting, #StrainGauges, #PowerTurbineBlades, #ConditionBasedMaintenance, #FlexibleHybridElectronics, #PrintedElectronics

This is a highlight of the presentation:

Flexible Hybrid Electronics Applications for the Industrial World

Printed, Flexible, Hybrid & InMold Electronics 2021

​

10-11 March 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

09:59 - 11:45

How do you monitor infusion and cure inside a 100-meter composite wind blade without wires?

How do you monitor infusion and cure inside a 100-meter composite wind blade without wires?

Large onshore and offshore wind turbines now include composite blades around 100 meters long. Manufacturing those blades is a substantial job, and both throughput and blade quality are critical—to the initial manufacturing rate and to service in the field. A project has been led for the last year to embed sensors into these blades, aiming to help during manufacturing and potentially beyond it.

The approach uses a wireless passive sensor that does not have to be wired and can be embedded into the blade during the manufacturing process. It is capable of being passively read out with RF. The sensor targets the infusion process and the curing process, with the goal of preventing rework during manufacturing and optimizing the amount of time these structures spend in the mold.

Embedding sensors during blade manufacturing is intended to support the manufacturing process first, and potentially to extend beyond that stage. The project is part of a Manufacturing USA program, with partners working on the sensor design. By following infusion and cure passively with RF, the sensor concept addresses rework prevention and mold-time optimization for very large composite blades.

In this short video, you can learn:
* A 100-meter composite blade makes manufacturing throughput and blade quality critical to initial production rate and field service.
* The project embeds a wireless passive sensor that needs no wiring and is read out with RF.
* The sensor is meant to follow infusion and curing to prevent rework and optimize mold time, with potential use beyond manufacturing.

📋 **Clip Abstract** This clip describes embedding wireless passive RF-read sensors into 100-meter composite wind blades during manufacturing. The sensors are intended to monitor infusion and cure, prevent rework, optimize time in the mold, and potentially support use beyond manufacturing.

About the speaker:
* Speaker: Nancy Stoffel
* Company: GE Research
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#WirelessPassiveSensors, #RFReadout, #CompositeBladeManufacturing, #InfusionCureMonitoring, #FlexibleHybridElectronics, #EmbeddedSensors

22:35 - 24:00

Which of these flexible hybrid electronics are actually in hospitals or scaled, and who prints them?

Which of these flexible hybrid electronics are actually in hospitals or scaled, and who prints them?

The clip answers scale and readiness with a concrete example: a Novi sensor shown as a fetal monitor that is already produced at scale and is in hospitals as a wireless monitor. That establishes at least one flexible hybrid electronics development as market ready, while the rest of the discussion turns to how such devices are manufactured and sourced.

On printing, the response is not a single in-house model. Some printing has been done with partners, and some is done in-house. As a general rule, the plan is not to self-supply; the approach tends to work with suppliers and experts for those tasks. The Saab torque sensor program used a New York State-based printer.

For most of the printed sensors discussed, the anticipated route is to work with suppliers rather than self-supply, with only a few exceptions. The Saab torque sensor collaboration was chosen with a New York State-based printer to support a quick move to market. That links the scale question to supplier-based printed-sensor production and to partner selection for speed.

In this short video, you can learn:
* A Novi fetal monitor is described as a wireless sensor already produced at scale and deployed in hospitals.
* Printing is split between partners and in-house work, but the stated general rule is not to become the sole supplier.
* The Saab torque sensor program used a New York State-based printer for quick market entry, and most printed sensors are expected from suppliers.

📋 **Clip Abstract** The discussion distinguishes market-ready flexible hybrid electronics from broader supplier questions. A Novi fetal monitor is cited as scaled and hospital-deployed, while printing is largely expected through partners and expert suppliers, with the Saab torque sensor using a New York State-based printer for speed.

About the speaker:
* Speaker: Nancy Stoffel
* Company: GE Research
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#NoviFetalMonitor, #WirelessFetalMonitor, #SaabTorqueSensor, #PrintedSensorSupply, #FlexibleHybridElectronics, #PrintedElectronics

13:06 - 15:23

Can a printed SAW torque sensor hit 1.5% accuracy on a spinning helicopter-engine shaft?

Can a printed SAW torque sensor hit 1.5% accuracy on a spinning helicopter-engine shaft?

A surface acoustic wave sensor is mounted directly onto the shaft to measure torque, and an antenna wrapped around that shaft couples closely to a second, non-spinning antenna nearby that picks up the signal and transmits it. The result is an extremely accurate torque sensor at about 1.5% accuracy, with an entire system far lighter than the alternatives used before, and it delivered better operations.

That sensor went into a helicopter engine program, supplying active feedback on how the shaft is operating. Expanding it demanded shafts of very different sizes, both much smaller and up to three- or four-foot diameters. The team therefore moved the original traditional-flex build onto printing, which gives the scalability to reach either extreme of that size range.

Surface-mounted components were the other target: at tens of thousands of RPM they become a reliability issue. Those parts are now printed, together with a direct die attach. The program demonstrated that this is possible, that performance looks very good even with printed components, and that reliability holds, opening the base technology to many products, since many things in the portfolio spin.

In this short video, you can learn:
* The SAW sensor and its wrap-around antenna deliver roughly 1.5% torque accuracy at far lower system weight than earlier approaches.
* Moving from traditional flex to printing provided the scalability to serve both much smaller shafts and three- to four-foot diameter ones.
* Printing the formerly surface-mounted components and using direct die attach addresses reliability at tens of thousands of RPM.

📋 **Clip Abstract** A surface acoustic wave sensor mounted on a spinning shaft, coupled through a wrap-around antenna to a stationary antenna, achieves about 1.5% torque accuracy in a helicopter engine program at far lower weight than prior systems. To scale across much smaller and three- to four-foot shafts, the build moved from traditional flex to printing, with printed components and direct die attach for reliability at tens of thousands of RPM.

About the speaker:
* Speaker: Nancy Stoffel
* Company: GE Research
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#SAWTorqueSensor, #PrintedWrapAroundAntenna, #DirectDieAttach, #HighRPMReliability, #FlexibleHybridElectronics, #AdditiveElectronics

Links to this speaker's talk page and other highlights appear here.

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page