top of page

Olena Makhotkina

Policrom

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Olena Makhotkina | Policrom: Which TPU chemistry and film-construction levers trade stretch, printability and textile lamination?

02:32 - 05:00

Other snippets from this talk

Summary of the clip:

Which TPU chemistry and film-construction levers trade stretch, printability and textile lamination?

TPU is not a universal film: it must be engineered for the application, but it is highly tailorable. A film can be constructed with a printable layer, a hot-melt layer for textile lamination and a liner. The liner addresses TPU's stretchability by helping handling during processing. This construction separates printability, lamination and handling into distinct film-design levers.

Chemistry is the next lever. TPU is a segmented polymer: hard segments provide hardness and tensile strength, while soft segments provide elastic behavior. Formulators can also choose polyester, polyether or polycarbonate TPU, and aromatic or aliphatic grades. These choices change the balance between mechanical performance and elastic response, so the TPU chemistry must match the target application rather than being treated as a commodity film.

Thickness and surface finish add further control. Thinner TPU is harder to work with because it is more stretchable. Surface can be tailored because, under temperature, TPU takes the surface roughness of the liner. A matte finish is easy to work with in screen printing: sheets do not stick to each other, and the material does not stick to the mesh.

In this short video, you can learn:
* TPU films can combine a printable layer, hot-melt lamination layer and liner to decouple printing, bonding and handling.
* Hard segments govern hardness and tensile strength, while soft segments govern elastic behavior; polyester, polyether, polycarbonate and aromatic/aliphatic options further tune the chemistry.
* Thinner TPU is more stretchable and harder to handle, while matte liner-derived surface roughness reduces sticking in screen printing.

๐Ÿ“‹ **Clip Abstract** TPU is not a universal material, but its film construction and chemistry can be tailored for specific applications. Printable and hot-melt layers, liner selection, hard/soft segment chemistry, thickness and matte surface finish are levers for balancing stretch, lamination and screen-print handling.

About the speaker:
* Speaker: Olena Makhotkina
* Company: Policrom
* Event: Electronic Textiles RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Electronic Textiles RESHAPED 2027 | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronictextilesreshaped

#TPUFilmLamination, #MatteSurfaceScreenPrinting, #HardSoftSegmentChemistry, #HotMeltTextileBonding, #ElectronicTextiles, #FlexibleElectronics

This is a highlight of the presentation:

TPU designed for specific applications

Electronic Textiles RESHAPED 2026 | Berlin

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

05:50 - 07:47

How do you fix ink adhesion and liner-release stretch failures in printable stretchable TPU sensors?

How do you fix ink adhesion and liner-release stretch failures in printable stretchable TPU sensors?

The first film was an original polyether-based TPU. It gave good ink adhesion, but some inks still adhered poorly. The fix was to change just the printable side of the film to polyester for better adhesion to those inks. This shows the printable surface can be tuned separately for the ink set.

For multilayer sensors, print on the first TPU layer, then encapsulate with another TPU layer, then continue printing more layers. The encapsulation protects the track. This stacked structure is presented as one way to build multiple sensor layers. The sequence matters: the printed first layer is covered by a TPU encapsulant before additional printing proceeds.

A separate handling failure occurs after printing: the TPU shows no shrinkage, but removing it from the liner can stretch the stretchable film and ruin the work. The answer is a heat-stabilized application tape. Apply it on top, peel out the TPU film, and apply that to fabric, avoiding stretch during liner removal.

In this short video, you can learn:
* Changing just the printable side from polyether-based TPU to polyester improved adhesion for inks that failed on the original film.
* Printing on a first TPU layer and encapsulating it with another TPU layer protects the track and supports additional printed layers.
* Heat-stabilized application tape lets the TPU film be peeled from the liner and applied to fabric without stretching it during removal.

๐Ÿ“‹ **Clip Abstract** Printable TPU films can fail when some inks do not adhere to the original polyether-based surface and when stretchable TPU is distorted during peeling from its liner. The approach combines polyester tuning on the printable side, TPU-to-TPU encapsulation for multilayer tracks, and heat-stabilized application tape for liner-to-fabric transfer.

About the speaker:
* Speaker: Olena Makhotkina
* Company: Policrom
* Event: Electronic Textiles RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Electronic Textiles RESHAPED 2027 | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronictextilesreshaped

#PolyetherTPU, #PolyesterInkAdhesion, #HeatStabilizedTape, #TPUEncapsulation, #StretchableSensors, #PrintedElectronics

11:08 - 12:24

Why does a printable TPU need a separate hot-melt layer that flows at 130โ€“150ยฐC?

Why does a printable TPU need a separate hot-melt layer that flows at 130โ€“150ยฐC?

Printable TPU films rely on a double structure to separate heat resistance from bonding capability. The top printable layer features higher thermal stability so it does not melt while curing printed conductive tracks in the oven. This heat resistance ensures that the underlying conductive tracks remain structurally stable and intact throughout printing, drying, and subsequent transfer processes onto the target textile substrate.

A dedicated hot-melt layer is engineered specifically for textile attachment and film lamination. This lower layer melts at controlled temperatures, typically between 130 and 150 degrees depending on the specific TPU formulation. During thermal transfer or lamination, this hot-melt material softens and flows to securely attach the structure to the fabric without affecting the stable printable layer above.

Decoupling thermal bonding from track printing preserves pattern fidelity during e-textile processing. While the hot-melt adhesive flows to adhere to the fabric or encapsulate with a top TPU film, the printable layer remains completely unaffected. This dual-layer approach allows high-temperature processing of conductive inks while enabling low-temperature transfer, preventing track deformation during final garment integration.

In this short video, you can learn:
* A double TPU structure separates high heat-resistant printing functionality from low-temperature thermal bonding.
* The printable TPU layer remains stable in drying ovens to prevent conductive track melting and deformation.
* The dedicated hot-melt layer activates between 130 and 150ยฐC to adhere securely to fabric substrates.

๐Ÿ“‹ **Clip Abstract** Dual-layer TPU formulations resolve the conflict between high-temperature ink processing and low-temperature textile lamination in e-textile manufacturing. By pairing a heat-resistant printable surface with a hot-melt layer flowing between 130 and 150ยฐC, conductive tracks maintain structural integrity during transfer.

About the speaker:
* Speaker: Olena Makhotkina
* Company: Policrom
* Event: Electronic Textiles RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Electronic Textiles RESHAPED 2027 | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronictextilesreshaped

#ThermoplasticPolyurethane, #HotMeltAdhesive, #TextileLamination, #ConductiveTrackStability, #ETextiles, #WearableElectronics


About this talk

โ†’ TPU designed for specific applications ยท Olena Makhotkina ยท The Future of Electronics RESHAPED 2026 Berlin

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page