top of page

Reza Chaji

VueReal

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Reza Chaji | VueReal: How do you get CMOS-level microLED drive power without paying for a CMOS chiplet per pixel?

08:00 - 10:18

Other snippets from this talk

Summary of the clip:

How do you get CMOS-level microLED drive power without paying for a CMOS chiplet per pixel?

The hybrid backplane divides the panel into 10 by 10 sub-arrays, each with its own micro driver running in passive mode. The result is effectively a selection of many smaller 10 by 10 displays inside one panel, which sidesteps the brightness, resolution and size limits that constrain conventional passive-matrix driving.

Because each driver operates in passive mode, circuits are shared across those hundred pixels, cutting the connection count from 100 pins to only 20. That pin reduction shrinks the size per pixel area significantly, and a cost analysis puts the approach close to high-end LTPS and possibly slightly cheaper than LTPO.

Function can also be folded into the driver: one sensor per 10 by 10 pixels, local transparency control and local dimming. That supports two modes, either controlling transparency or using the array as low-resolution secondary content behind the high-resolution microLED display. The backplane design is done, with foundry fabrication and samples hoped for in 2027.

In this short video, you can learn:
* A 10 by 10 sub-array driver in passive mode cuts panel connections from 100 pins to 20.
* Cost analysis places the hybrid backplane close to high-end LTPS and slightly cheaper than LTPO.
* Each 10 by 10 block can host a sensor, local dimming and local transparency control.

📋 **Clip Abstract** A hybrid backplane splits a microLED panel into 10 by 10 sub-arrays, each driven in passive mode by a shared micro driver. The approach cuts pins from 100 to 20, targets LTPS-class cost or cheaper, adds per-block sensing and local transparency control, and is slated for foundry samples in 2027.

About the speaker:
* Speaker: Reza Chaji
* Company: VueReal
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#MicroLEDBackplane, #PassiveMatrixDriving, #LocalTransparencyControl, #LTPSBackplaneCost, #MicroLEDDisplays, #DisplayBackplane

This is a highlight of the presentation:

Integrated MicroSolar for Power Efficient Displays

Innovation Festival: Additive, Printed, Sustainable Electronics

Innovation Festival: MicroLEDs and AR/VR Displays

46213

Online Platform

Organised By:

TechBlick

TechBlick and MicroLED Industry Association

More Highlights from the same talk.

11:08 - 13:08

Can a front-laminated solar film deliver 300 mW and touch sensing on a microLED watch?

Can a front-laminated solar film deliver 300 mW and touch sensing on a microLED watch?

For wearables where thickness and pixel density are important, the solar is integrated into the front of the display. It converts ambient light into energy. In an experiment, it also recovered light lost into the structure by the microLED, because not all light can be extracted from the microLED; some of that lost light can be used.

The solar surface can also integrate touch, which is an issue right now with microLED. This helps integrate touch into the panel, described as a major advantage. Because the solar is darker, it absorbs more light, inherently improving contrast and enabling higher contrast without black-matrix integration.

A structure shown at SID is now in process for customer samples. It is a watch display with 504 by 405 pixel resolution and RGB sphere. Solar is laminated in front as a single film layer, absorbing light and producing power. At peak, roughly 300 milliwatt is generated outdoors in direct sunlight where the display is brightest, consumes most power, and generates most power.

In this short video, you can learn:
* Front solar integration converts ambient light and recovers microLED light that cannot be extracted.
* The solar surface doubles as touch sensing and improves contrast without black-matrix integration.
* A 504 by 405 RGB watch display with front-laminated solar film can generate roughly 300 mW outdoors.

📋 **Clip Abstract** For wearables, a front-laminated solar film on a microLED display converts ambient light into power and recovers light lost in the microLED structure. It also enables touch integration and higher contrast without a black matrix, with a 504 by 405 RGB watch display generating roughly 300 mW outdoors in direct sunlight.

About the speaker:
* Speaker: Reza Chaji
* Company: VueReal
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#FrontLaminatedSolarFilm, #MicroLEDLightRecovery, #SolarTouchIntegration, #RGBSphereWatchDisplay, #MicroLEDDisplays, #SolarPoweredWearables

00:08:16.025 - 00:09:29.885

Can we eliminate daily smartwatch charging by embedding a photovoltaic layer directly beneath an 80% transparent MicroLED display?

Can we eliminate daily smartwatch charging by embedding a photovoltaic layer directly beneath an 80% transparent MicroLED display?

One of the most compelling aspects of microLED display technology is its ability to integrate diverse device functionalities directly into the display stack. At CES, VueReal demonstrated a novel "pixel-and-solar" technology that layers a microLED display directly over a photovoltaic solar cell. This integration is made possible because their microLED displays can achieve an optical transparency rating of over 80%, allowing sufficient light to pass through the display plane to harvest energy underneath.

By placing a solar cell beneath a highly transparent microLED panel, device manufacturers can fundamentally redesign wearable electronics like smartwatches. Instead of relying on bulkier, more expensive batteries to drive high-luminance displays, the integrated solar cell constantly replenishes the system's power. This design cycle dramatically reduces the required battery capacity, leading to cheaper manufacturing costs, slimmer product profiles, and extended battery life from days to weeks.

This hybrid architectural approach illustrates that microLED technology should not be evaluated purely on individual component costs. Even if a microLED display carries a price premium over legacy OLED or LCD panels, the systemic savings realized from downsized batteries and simplified enclosures can lower the overall bill of materials (BOM). This paradigm shift positions the display as an active platform for energy harvesting and device integration rather than a passive power drain.

In this short video, you can learn:
* The engineering concept behind "pixel-and-solar" integration using highly transparent microLED display stacks.
* How combining solar cells with 80% transparent displays can shrink battery sizes and reduce overall bill-of-materials costs.
* The system-level design advantages of microLED technology that offset display-level cost premiums in consumer wearables.

📋 **Clip Abstract**
VueReal’s "pixel-and-solar" technology integrates a photovoltaic cell directly underneath an 80% transparent microLED display panel. This configuration harvests ambient light to continuously charge the device, enabling slimmer, lower-cost smartwatches with vastly extended battery lifetimes.

#TransparentMicroLED, #PixelAndSolar, #DisplayIntegratedPhotovoltaics, #EnergyHarvestingDisplays, #WearableElectronics, #OptoelectronicIntegration

00:03:39.425 - 00:04:12.285

Why is 40% transparency the hard physical limit for OLED displays, and how does MicroLED shatter this ceiling to exceed 80%?

Why is 40% transparency the hard physical limit for OLED displays, and how does MicroLED shatter this ceiling to exceed 80%?

While organic light-emitting diode (OLED) technology has made massive leaps in flexibility, it faces a fundamental physical constraint when it comes to optical transparency. Currently, the absolute maximum average transparency achievable for an active-matrix OLED panel sits at a mere 40%. This physical limitation severely restricts its application in next-generation architectural glass, automotive windshields, and smart retail interfaces where true optical clarity is mandatory.

In contrast, VueReal's micro-solid printing mass transfer approach enables large-scale, low-pixel-per-inch (PPI) displays to break past this optical barrier entirely. By precisely depositing individual microLEDs onto a backplane with high positional accuracy and vast empty space between active emitter sites, they have successfully demonstrated 10-inch and 12-inch panels boasting over 80% transparency.

This dramatic improvement opens up entirely new design paradigms that were previously relegated to science fiction. True high-transparency displays can now seamlessly blend digital information with physical reality, allowing any glass or semi-transparent surface to function as an active human-machine interface without compromising background visibility.

In this short video, you can learn:
* The fundamental physical and structural limitations that cap OLED optical transparency at just 40%.
* How VueReal's mass transfer printing technique achieves record-breaking display transparency exceeding 80%.
* The immediate commercial opportunities for integrating high-transparency microLED displays into automotive and architectural glass surfaces.

📋 **Clip Abstract**
While OLED displays are highly flexible, they are fundamentally limited to a maximum transparency of 40% due to structural constraints. Reza Chaji explains how VueReal utilizes proprietary micro-solid printing to manufacture 10-inch and 12-inch displays that achieve over 80% transparency, opening new possibilities for interactive glass surfaces.

#MicroLED, #MassTransfer, #TransparentDisplays, #MicroSolidPrinting, #SmartGlass, #PrintedElectronics


About this talk

→ Integrated MicroSolar for Power Efficient Displays · Reza Chaji · TechBlick Innovations Festival July 2026


Other talks by Reza Chaji


More highlights from Reza Chaji

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page