Richard Clark | Morgan Advanced Materials: How close are disordered rock-salt cathodes to commercialization, and what cycle life do they reach?
22:00 - 23:53
Other snippets from this talk
Summary of the clip:
How close are disordered rock-salt cathodes to commercialization, and what cycle life do they reach?
On commercialization, the answer given is simply a number of years away. The problem is not one blocker but too many options. Manganese chemistry carries most of the attention, yet because formulators can pick from the whole palette of transition metals — up to 12 in high-entropy compositions at the extreme — the design-of-experiments matrix becomes very large.
Two further dimensions widen the matrix. The cathode must avoid involving the anionic side in redox, which pushes compositions from oxide toward oxyfluoride, where fluorine seems to give a benefit. And the transition-metal count must be chosen so the structure stays disordered not only as made but while charging and discharging — that is where the difficulty sits.
Cycle life is the reckoning. DRX today resembles early silicon: excellent if you only do one cycle. Roughly 50 cycles is a comfortable claim, against about 500 for electronics and 2,000 to 3,000 for EV duty. Combinatorial screening, such as the work at Wildcat, is the route to narrowing the field.
In this short video, you can learn:
* Disordered rock-salt cathodes are still a number of years from commercialization, held back by an exceptionally large transition-metal composition space rather than a single technical blocker.
* Manganese chemistry dominates current work, but high-entropy DRX designs have explored up to 12 transition metals, and fluorine addition through oxyfluoride compositions adds another design dimension.
* About 50 cycles is achievable today, far short of roughly 500 for electronics and 2,000 to 3,000 for EV, with disorder retention during cycling the key structural requirement.
📋 **Clip Abstract** Disordered rock-salt cathodes remain years from commercialization, with manganese chemistry dominating a composition space broad enough to include high-entropy structures using up to 12 transition metals. Suppressing anionic redox and keeping the rock-salt disorder stable through cycling are the limiting requirements, with about 50 cycles achievable today against 500 for electronics and 2,000 to 3,000 for EV.
About the speaker:
* Speaker: Richard Clark
* Company: Morgan Advanced Materials
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#DisorderedRockSalt, #HighEntropyDRX, #OxyfluorideCathode, #CycleLifeRetention, #SolidStateBatteries, #BatteryMaterials
This is a highlight of the presentation:
Opportunities for cathodes in commercialized solid-state batteries
More Highlights from the same talk.
06:49 - 08:16
Why are NMC, LNMO and LFP the viable cathode families, and what limits each one?
Why are NMC, LNMO and LFP the viable cathode families, and what limits each one?
The layered cathode family has moved toward NMC-type compositions, built from a clever combination of nickel, manganese and cobalt. The key constraint is transition-metal migration: few transition metals avoid migrating into lithium spaces when lithium is depleted during charging. Nickel and cobalt bring known sustainability and cost problems, but those are presented as factors of what an effective cathode material requires.
On the spinel side, activity has shifted toward LNMO as a high-voltage material. LNMO is described as the only real commercial high-voltage material out there right now. That framing distinguishes LNMO by voltage rather than by the layered family's composition route, while earlier LMO work is described as moving away from, or at least no longer the main focus.
On the polyanion side, LFP is the dominant category and is moving toward LFMP. Conductivity with LFP can be a challenge, but work in the last year or so at TTL reportedly shows that plate-like LFP morphology gives performance benefits. That makes morphology a lever for the polyanion family, alongside the shift from LFP toward LFMP.
In this short video, you can learn:
* NMC-type layered cathodes are constrained because few transition metals avoid migrating into lithium spaces when lithium is depleted during charging.
* LNMO is described as the only real commercial high-voltage material out there right now.
* LFP remains the dominant polyanion category and is moving toward LFMP, with plate-like morphology reported to improve performance despite conductivity challenges.
📋 **Clip Abstract** Layered cathodes have progressed to NMC-type compositions, with transition-metal migration limiting the choices and nickel-cobalt sustainability and cost remaining known factors. LNMO is positioned as the only real commercial high-voltage material, while LFP dominates polyanions and moves toward LFMP, with plate-like morphology reportedly benefiting performance.
About the speaker:
* Speaker: Richard Clark
* Company: Morgan Advanced Materials
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#NMCCathodes, #LNMO, #LFP, #PlateLikeMorphology, #SolidStateBatteries, #CathodeMaterials
14:53 - 16:54
Why is the cathode—not the electrolyte—the real differentiator for solid-state batteries?
Why is the cathode—not the electrolyte—the real differentiator for solid-state batteries?
At the cathode, the interface problem is multiplied: a composite contains cathode material, a conductive additive and possibly a binder from slurry casting, so the cathode–electrolyte interface is only one of many. That interface count drives impedance and mechanical issues. In solid-state cells, redesigning the cathode is therefore an opportunity, not an afterthought, because today’s electrode architecture was inherited from available manufacturing capability.
For solid–solid contacts, any volume expansion is a major problem. One route is a zero-strain cathode: synthesize a material with essentially zero volume change. Another is tuning compositions such as NCM 271 or NCM 361, which are described as close to zero volume change. A third is mechanical blending, combining a positive and a negative volume change so the net is zero.
Single-crystal cathode materials are another lever. Moving from polycrystalline to single-crystal material can deliver serious benefits in cycle life, and this is described as not too difficult to do. That makes particle morphology a practical cathode design variable alongside zero-strain compositions and blends, rather than only an electrolyte-side concern.
In this short video, you can learn:
* Composite cathodes create many interfaces—cathode material, conductive additive, binder and electrolyte—so impedance and mechanical issues are not confined to a single cathode–electrolyte interface.
* Zero-strain approaches include synthesizing a zero-volume-change material, tuning NCM 271 or NCM 361, or mechanically blending positive and negative volume changes.
* Single-crystal cathodes can provide serious cycle-life benefits versus polycrystalline materials and are described as not too difficult to implement.
📋 **Clip Abstract** Solid-state batteries allow the cathode to be redesigned rather than inherited from existing manufacturing capability. The clip frames cathode composites as multi-interface systems and compares zero-strain compositions, mechanical blends and single-crystal materials as routes to manage volume change, impedance and cycle life.
About the speaker:
* Speaker: Richard Clark
* Company: Morgan Advanced Materials
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#ZeroStrainCathode, #SingleCrystalCathode, #CathodeElectrolyteInterface, #NCM271, #SolidStateBatteries, #BatteryMaterials
09:11 - 10:07
How badly did 2010 cathode-demand forecasts miss the actual 2020 market?
How badly did 2010 cathode-demand forecasts miss the actual 2020 market?
The 2010 projection saw cathode demand rising from 44,000 tonnes to 180,000 tonnes in 2020, set against the pre-EV LCO baseline of 2000. Actual 2020 cathode demand reached 450,000 tonnes, and the following year was probably closer to 800,000 tonnes. That is not a marginal forecast error; the 2020 market was 2.5 times the projected tonnage.
EV volumes also outran the 2010 expectations. About 3.2 million EVs were sold in 2020, then just over 6.5 million in 2021, doubling year on year and exceeding most projections. Some forecasts were quite good, but the aggregate demand picture was far larger than the 180,000-tonne cathode projection implied.
The 2020 split shows NMC becoming more dominant, particularly with higher nickel content. Other cathode chemistries did not necessarily fall in quantity; they were outpaced by investment. The forecast miss is therefore compositional as well as volumetric: total cathode demand was much larger, and NMC—especially high-nickel NMC—captured the growth.
In this short video, you can learn:
* The 2010 forecast projected 180,000 tonnes of cathode demand in 2020, while actual demand reached 450,000 tonnes and probably approached 800,000 tonnes the next year.
* EV sales reached about 3.2 million in 2020 and just over 6.5 million in 2021, exceeding most projections.
* NMC, particularly higher-nickel NMC, became more dominant by 2020, while other chemistries were outpaced by investment rather than necessarily falling in quantity.
📋 **Clip Abstract** A 2010 forecast projected 180,000 tonnes of cathode demand for 2020, but actual demand was 450,000 tonnes and probably closer to 800,000 tonnes the following year. EV sales of about 3.2 million in 2020 and just over 6.5 million in 2021 exceeded most projections, with higher-nickel NMC becoming more dominant while other chemistries were outpaced by investment.
About the speaker:
* Speaker: Richard Clark
* Company: Morgan Advanced Materials
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#CathodeDemandForecast, #HighNickelNMC, #CathodeTonnageMiss, #EVSalesDoubling, #SolidStateBatteries, #BatteryMaterials
About this talk
→ Opportunities for cathodes in commercialized solid-state batteries · Richard Clark · Battery Materials: Next-Gen & Beyond Lithium Ion 2022


