Roelof Aalpoel, Terho Lahtinen | ScreenTec, Suunto OY: Which printable fabric, flatbed silkscreen process and stretchability target make comfortable skin-worn patch electrodes?
16:06 - 18:32
Other snippets from this talk
Summary of the clip:
Which printable fabric, flatbed silkscreen process and stretchability target make comfortable skin-worn patch electrodes?
The patch construction uses a printable fabric substrate, conductive adhesive and hydrogels, with printed layers added on the fabric; earlier designs also combined fabric and printed elements. The fabric was tested and selected as a print-compatible substrate made for this purpose. The process is flatbed silkscreen printing rather than rotary screen printing, and printing also appears on the top for decoration.
Ink requirements depend on the application. Current patches do not need a lot of stretching, but they require flexibility and a tiny bit of stretching because skin stretches and moves. Some stretching is needed for optimal user comfort. Available materials can achieve up to 100% stretching, but for this application 20 or 30% stretchability is already quite sufficient for user comfort.
The material set still includes conductive adhesive and hydrogels, plus printing on the fabric. Connection uses snap buttons specially designed to be extra flat and as non-obtrusive as possible. The substrate is a fabric tested and selected for printability, while printed decoration sits on the top. Comfort comes from flexibility and a small amount of stretch, not from requiring maximum elongation in every layer.
In this short video, you can learn:
* The patches use a print-compatible fabric substrate with conductive adhesive and hydrogels, connected by extra-flat snap buttons.
* The production process described is flatbed silkscreen printing rather than rotary screen printing.
* Available materials can stretch up to 100%, but 20–30% stretchability is considered sufficient for user comfort in this patch application.
📋 **Clip Abstract** The clip details a printable fabric substrate, flatbed silkscreen printing, conductive adhesive, hydrogels and flat snap buttons for skin-worn patch electrodes. It also sets ink stretch requirements: materials can reach 100% elongation, but 20–30% stretchability is already sufficient for comfort in this application.
About the speakers:
* Speakers: Roelof Aalpoel, Terho Lahtinen
* Companies: ScreenTec, Suunto OY
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#FlatbedSilkscreenPrinting, #PrintableFabricSubstrate, #ConductiveHydrogel, #20To30PercentStretch, #WearableSensors, #PrintedElectronics
This is a highlight of the presentation:
Custom Disposable Medical Electrodes: fast Prototyping and Efficient Upscaling (joint talk)
More Highlights from the same talk.
04:27 - 06:23
Which stages of a disposable medical electrode's path to market can be compressed, and which can never be rushed?
Which stages of a disposable medical electrode's path to market can be compressed, and which can never be rushed?
Not every stage of a smart patch programme can be compressed. Concept and idea generation takes its own time, whether a spur-of-the-moment notion or the result of years of research, and testing and validation always consumes a fixed period because clinical and safety testing cannot be rushed in the medical field. That leaves prototyping, upscaling and mass production as the stages where time can genuinely be recovered.
The lever is a fail-quick strategy run in four-week production cycles. A couple of prototypes are built, what works is kept, what does not is cut out, and the programme moves to the next stage. Time is also found in producibility and manufacturability of the product: cutting out useless steps and simplifying material stacks so the stack that passes validation can actually be built.
Production constraints are designed in from the start. Even at the prototype stage, features that are very difficult to do at mass scale are removed, manual steps are kept to an absolute minimum, and complete automation is the target where possible. This saves time across the whole R&D process: once a prototype is approved, testing and upscaling can start right away instead of looping back.
In this short video, you can learn:
* Clinical and safety testing cannot be compressed; recoverable time sits in prototyping, upscaling and mass production.
* Fail-quick four-week production cycles keep working prototype features and cut the rest before the next stage.
* Designing manufacturability in from the first prototype lets testing and upscaling start as soon as a prototype is approved.
📋 **Clip Abstract** A medical patch programme cannot compress concept work or clinical and safety validation, so this walkthrough targets the remaining stages with fail-quick four-week prototyping cycles. Designing producibility and manufacturability in from the first prototype, by removing hard-to-scale features, trimming manual steps and simplifying material stacks, lets testing and upscaling begin as soon as a prototype is approved.
About the speakers:
* Speakers: Roelof Aalpoel, Terho Lahtinen
* Companies: ScreenTec, Suunto OY
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#FailFastPrototyping, #FourWeekCycles, #MaterialStackSimplification, #DesignForManufacturability, #PrintedElectronics, #WearableSensors
22:02 - 24:02
Can custom disposable medical patches hit sub-50-cent cost targets when standard ECG electrodes already sell in the cents?
Can custom disposable medical patches hit sub-50-cent cost targets when standard ECG electrodes already sell in the cents?
The stated benchmark is below one euro per patch, and ideally below 50 cents — even for a medical application where higher prices are usually tolerated. The team describes a chicken-and-egg problem: cost must fall to win higher volumes, yet higher volumes are needed to bring cost down. Their proactive answer is to simplify the material stack further to decrease cost.
Standard round ECG electrodes sourced from China go for cents — under tens of cents. With the custom patches, because they are customized and sometimes a bit more involved, it is hard to get to those price levels. That gap separates a commodity electrode from a designed, application-specific patch, and volume decides which side a product lands on.
Two cost drivers are named for the current custom patches: the custom snaps, which increase the price quite a bit, and manual work that remains because volumes are still at relatively low levels. The hope is to build automation into the manufacturing process, while simplifying the material stack to cut cost proactively.
Target cost for a disposable smart patch is below one euro, ideally below 50 cents, even in medical applications. Commodity round ECG electrodes from China land under tens of cents, a level custom, more involved patches struggle to reach. Custom snaps and manual assembly at low volumes inflate patch price, with automation and material-stack simplification as the intended levers.
In this short video, you can learn:
* Target cost for a disposable smart patch is below one euro, preferably below 50 cents, even though medical applications tolerate higher prices.
* Commodity round ECG electrodes from China cost under tens of cents, a level that customized, more involved patches find hard to reach.
* Custom snaps and manual assembly at low volumes raise patch price, making automation and material-stack simplification the levers to pursue.
📋 **Clip Abstract** Cost benchmarks for disposable medical patches sit below one euro and ideally below 50 cents, while commodity ECG electrodes sell at under tens of cents. Customization, custom snaps and manual low-volume assembly keep custom patches above that floor, so material-stack simplification and future automation are the routes being pursued.
About the speakers:
* Speakers: Roelof Aalpoel, Terho Lahtinen
* Companies: ScreenTec, Suunto OY
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#DisposableECGPatches, #CustomSnapElectrodes, #Sub50CentPatchCost, #MaterialStackSimplification, #WearableSensors, #PrintedElectronics
Links to this speaker's talk page and other highlights appear here.


