top of page

Samuel Halim

Avantama AG

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Samuel Halim | Avantama AG: Can perovskite QD films survive 2,000 hours at 300 mW/cm² and still pass panel-maker reliability?

10:39 - 12:31

Other snippets from this talk

Summary of the clip:

Can perovskite QD films survive 2,000 hours at 300 mW/cm² and still pass panel-maker reliability?

Reliability is presented as one of the biggest issues for perovskite quantum dots. Green perovskite QD films previously passed the qualification of a leading panel maker for the first time, and stability has since been extended strongly: humidity and temperature stability were more than doubled. The clip frames commercial products as making reliability discussion even more important.

The graph plots 2,000 hours on the x-axis and delta Y on the y-axis. Dotted blue and green lines are internal specifications; the blue dotted line is the high-flux specification defined for the equipment, using a very high flux of 300 milliwatts per centimeter. The green perovskite film appears stable over 2,000 hours, with expectation to extend to 3,000 hours.

First reliability data are also presented for yellow films containing red perovskite QDs, green perovskite QDs and red KSF phosphors. In this plot, the x value is shown on the left-hand side and the y value on the right-hand side. The data introduce a yellow-film format that combines perovskite QDs with KSF phosphor for reliability assessment.

In this short video, you can learn:
* Green perovskite QD films have passed a leading panel maker's qualification and later showed more than double the humidity and temperature stability.
* At a defined high flux of 300 mW/cm², the green perovskite film appears stable over 2,000 hours, with expectation of 3,000 hours.
* Yellow films combining red and green perovskite QDs with red KSF phosphors now have their first reliability data.

📋 **Clip Abstract** The clip addresses perovskite QD reliability for commercial products, citing green films that passed a leading panel-maker qualification and later more than doubled humidity and temperature stability. It shows green film stability over 2,000 hours under a 300 mW/cm² high-flux specification and presents first reliability data for yellow films containing red and green perovskite QDs plus red KSF phosphors.

About the speaker:
* Speaker: Samuel Halim
* Company: Avantama AG
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQDFilms, #HighFlux300mW, #GreenQDReliability, #KSFYellowFilm, #QuantumDotDisplays, #DisplayReliability

This is a highlight of the presentation:

First commercial products with perovskite QDs

Displays & Lighting 2021: Innovations & Market Trends

​

14-16 July 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

06:28 - 08:50

Green-only film with on-chip KSF or one yellow film with both—which wins for miniLED uniformity and cost?

Green-only film with on-chip KSF or one yellow film with both—which wins for miniLED uniformity and cost?

Concept one pairs a quantum-dot film with red KSF phosphor placed on-chip in the backlight. KSF usage stays low, which lowers cost, and on-chip KSF is already established on the market, so it is market ready. The drawbacks are that several parties are involved in white point tuning, and backlight color uniformity plus LED yield for mini LED backlights is not very good. It suits edge-lit and direct-lit LCDs.

Option two is a yellow, RoHS-compliant film that puts green perovskite quantum dots and red KSF into one single sheet. The challenge was housing two very different conversion particles in one matrix; tuning the KSF phosphor, the QD ligands and the matrix materials engineered compatibility between KSF and perovskite. Film brightness was maximized while KSF usage per film area was minimized, and reliability of the yellow conversion film was engineered and optimized.

The yellow film delivers high backlight unit color uniformity for mini LED backlights, and only one party is involved in tuning. Its disadvantage is high KSF usage, which automatically yields higher cost. That trade makes the second concept suitable for a high number of LEDs, such as mini LED backlighting, where the green film with on-chip KSF remains the alternative for lower LED counts.

In this short video, you can learn:
* On-chip KSF keeps phosphor usage and cost low but splits white-point tuning across several parties and hurts mini LED color uniformity and yield.
* Combining green perovskite QDs with red KSF in one yellow film required tuning the phosphor, QD ligands and matrix to make the two particles compatible.
* The yellow film trades higher KSF usage and cost for single-party tuning and high backlight color uniformity at high LED counts.

📋 **Clip Abstract** Two perovskite quantum-dot backlight architectures are compared for LCD and mini LED backlights: a green film with on-chip red KSF and a single yellow RoHS-compliant film combining green perovskite QDs with red KSF. The first keeps KSF usage low and is market ready but splits white-point tuning and weakens mini LED color uniformity and yield; the second spends more KSF for uniform color and single-party tuning.

About the speaker:
* Speaker: Samuel Halim
* Company: Avantama AG
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQDs, #KSFPhosphor, #MiniLEDBacklight, #ColorUniformity, #QuantumDotDisplays, #BacklightOptics

13:37 - 15:56

Can miniLED LCD beat RGB OLED on power efficiency while adding 30% more Rec. 2020 color?

Can miniLED LCD beat RGB OLED on power efficiency while adding 30% more Rec. 2020 color?

Battery-driven devices are decided by power efficiency, the metric that has kept RGB OLED — marked in yellow — the prime candidate for such products. White OLED appears only in grid-powered displays such as TVs and monitors, because its power efficiency is bad. RGB OLED, meanwhile, is absent from TVs for a different reason: the high cost of large-size displays.

The introduction of miniLEDs changes the calculation: miniLED LCD displays might even have better power efficiency than RGB OLEDs, which would let LCD compete with RGB OLED in battery-driven devices again. MiniLED LCD also does more than match OLED power requirements — combined with a yellow conversion film of red KSF phosphor and green perovskite quantum dots, it delivers a better color gamut.

Against the just-released iPad Pro, a miniLED backlight fitted with a perovskite quantum dot conversion film raises color gamut by almost 30% — from roughly 70% Rec. 2020 to over 90% Rec. 2020. Tablets and notebooks with the best color image quality are expected very soon. The combination is already proven to yield the best color gamut, highest brightness and stability sufficient for display applications.

In this short video, you can learn:
* RGB OLED leads on power efficiency for battery-driven devices but is shut out of TVs by the high cost of large-size displays.
* MiniLED LCD may out-efficiency RGB OLED, reopening battery-driven devices to LCD.
* A yellow film of red KSF phosphor plus green perovskite quantum dots lifts a miniLED backlight from about 70% to over 90% Rec. 2020.

📋 **Clip Abstract** MiniLED backlights shift the power-efficiency contest back toward LCD, possibly outperforming RGB OLED, which is itself excluded from TVs by large-size cost. Pairing that backlight with a yellow film of red KSF phosphor and green perovskite quantum dots lifts Rec. 2020 coverage from around 70% to over 90%, almost 30% more.

About the speaker:
* Speaker: Samuel Halim
* Company: Avantama AG
* Event: Displays & Lighting 2021: Innovations & Market Trends

Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/

#PerovskiteQuantumDots, #KSFPhosphor, #MiniLEDBacklight, #Rec2020ColorGamut, #QuantumDotDisplays, #LCDvsOLED


About this talk

→ First commercial products with perovskite QDs · Samuel Halim · Displays & Lighting: Innovations & Market Trends 2021


Other talks by Samuel Halim

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page